WebFilings | EDGAR view
 
 
 
 
 
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-Q
(Mark One)
 
[X]
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
FOR THE QUARTERLY PERIOD ENDED April 3, 2010 
OR
 
[  ]
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
FOR THE TRANSITION PERIOD FROM __________ TO __________
Commission file number 000-18032
LATTICE SEMICONDUCTOR CORPORATION
(Exact name of Registrant as specified in its charter)
 
State of Delaware
 
93-0835214
(State or other jurisdiction of incorporation or
organization)
 
(I.R.S. Employer Identification No.)
 
 
 
5555 N.E. Moore Court, Hillsboro, Oregon
 
97124-6421
(Address of principal executive offices)
 
(Zip Code)
(503) 268-8000
(Registrant's telephone number, including area code)
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   Yes [X] No [  ]
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period as the registrant was required to submit and post such files).   Yes  [  ] No  [  ]
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one): 
 
Large accelerated filer[  ]
Accelerated filer [X]
 
 
 
 
 
 
Non-accelerated filer [  ]
Smaller reporting company [  ]
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).   Yes  [  ] No [X]
Number of shares of common stock outstanding as of May 4, 2010                   115,944,019
The information contained in this Form 10-Q is as of May 5, 2010. This Form 10-Q should be read in conjunction with our Annual Report on Form 10-K for the year ended January 2, 2010.
 
 
 
 
 
 

 
LATTICE SEMICONDUCTOR CORPORATION
INDEX 
 
 
PART I. FINANCIAL INFORMATION
 
 
 
 
Item 1.
Financial Statements (unaudited)
 
 
 
 
Condensed Consolidated Statements of Operations - Three Months Ended April 3, 2010 and April 4, 2009
 
 
 
 
Condensed Consolidated Balance Sheets – April 3, 2010 and January 2, 2010
 
 
 
 
Condensed Consolidated Statements of Cash Flows – Three Months Ended April 3, 2010 and April 4, 2009
 
 
 
 
Notes to Condensed Consolidated Financial Statements
 
 
 
Item 2.
Management’s Discussion and Analysis of Financial Condition and Results of Operations
 
 
 
Item 3.
Quantitative and Qualitative Disclosures About Market Risk
 
 
 
Item 4.
Controls and Procedures
 
 
 
 
PART II. OTHER INFORMATION
 
 
 
 
Item 1.
Legal Proceedings
 
 
 
Item 1A.
Risk Factors
 
 
 
Item 2.
Unregistered Sales of Securities and Use of Proceeds
 
 
 
Item 6.
Exhibits
 
 
 
 
Signatures
 
 

2


 
Forward-Looking Statements
This Quarterly Report on Form 10-Q contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Any statements about our expectations, beliefs, plans, objectives, assumptions or future events or performance are not historical facts and may be forward-looking. We use words or phrases such as “anticipates,” “believes,” “could,” “estimates,” “expects,” “intends,” “plans,” “predicts,” “projects,” “may,” “will,” “should,” “continue,” “ongoing,” “future,” “potential” and similar words or phrases to identify forward-looking statements. Examples of forward-looking statements include, but are not limited to, statements about our fiscal 2010 revenues from sell-through distributors; changes to our unrecognized tax benefits; the timing of our completion of our 2009 restructuring plans; our expectations that a significant portion of our revenue will continue to be dependent on the communications end market; the Asian Pacific market being the primary source of our revenue; our benefiting from our cost reduction actions; our expectations regarding research and development investment and increases in capital expenditures; the timing of our receipt of the remaining Fujitsu advance; and our beliefs concerning the adequacy of our liquidity and ability to meet our operating and capital requirements and obligations.
 
Forward-looking statements involve estimates, assumptions, risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The key factors that could cause our actual results to differ materially from the forward-looking statements include global economic conditions and uncertainty, the concentration of our sales in the communications equipment end market, particularly as it relates to the concentration of our sales in the Asia Pacific region, market acceptance and demand for our new products, the effect of the downturn in the economy on capital markets and credit markets, the impact of competitive products and pricing, unanticipated taxation requirements, unexpected impacts of recent accounting guidance and the other risks that are described herein and that are otherwise described from time to time in our filings with the Securities and Exchange Commission, including but not limited to, the items discussed in “Risk Factors” in Item 1A of Part II of this Report. You should not unduly rely on forward-looking statements because our actual results could differ materially from those expressed in any forward-looking statements made by us. In addition, any forward-looking statement applies only as of the date on which it is made. We are not required to, and undertake no obligation to, update any forward-looking statements to reflect events or circumstances that occur after the date on which such statements are made or to reflect the occurrence of unanticipated events.

3


 
PART I. FINANCIAL INFORMATION
 
ITEM 1.    FINANCIAL STATEMENTS
 
LATTICE SEMICONDUCTOR CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
(unaudited)
 
 
Three months ended
 
April 3,
2010
 
April 4,
2009
Revenue
$
70,432
 
 
$
43,336
 
Costs and expenses:
 
 
 
Cost of products sold
29,264
 
 
20,658
 
Research and development
14,682
 
 
14,891
 
Selling, general and administrative
15,418
 
 
12,943
 
Amortization of intangible assets
 
 
228
 
Restructuring charges
82
 
 
(25
)
 
59,446
 
 
48,695
 
Income (loss) from operations
10,986
 
 
(5,359
)
Other income (expense), net
302
 
 
(512
)
Income (loss) before provision (benefit) for income taxes
11,288
 
 
(5,871
)
Provision (benefit) for income taxes
199
 
 
(121
)
Net income (loss)
$
11,089
 
 
$
(5,750
)
 
 
 
 
Basic and diluted net income (loss) per share
$
0.10
 
 
$
(0.05
)
 
 
 
 
Shares used in per share calculations:
 
 
 
Basic
115,669
 
 
115,430
 
Diluted
116,717
 
 
115,430
 
See Accompanying Notes to Unaudited Condensed Consolidated Financial Statements.
 

4


 
LATTICE SEMICONDUCTOR CORPORATION
CONDENSED CONSOLIDATED BALANCE SHEETS
(In thousands, except share and par value data)
(unaudited)
 
 
April 3,
2010
 
January 2,
2010
Assets
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
156,120
 
 
$
156,069
 
Short-term marketable securities
27,405
 
 
8,471
 
Accounts receivable, net
48,303
 
 
33,551
 
Inventories
24,680
 
 
25,925
 
Current portion of foundry advances
5,254
 
 
11,475
 
Prepaid expenses and other current assets
8,348
 
 
7,980
 
Total current assets
270,110
 
 
243,471
 
Property and equipment, less accumulated depreciation
35,863
 
 
36,507
 
Long-term marketable securities
12,822
 
 
12,939
 
Other long-term assets
2,779
 
 
3,640
 
Total assets
$
321,574
 
 
$
296,557
 
Liabilities and Stockholders' Equity
 
 
 
Current liabilities:
 
 
 
Accounts payable and accrued expenses
$
26,731
 
 
$
22,679
 
Accrued payroll obligations
7,986
 
 
5,118
 
Deferred income and allowances on sales to distributors
16,735
 
 
10,160
 
Total current liabilities
51,452
 
 
37,957
 
Long-term liabilities
4,645
 
 
5,240
 
Total liabilities
56,097
 
 
43,197
 
Commitments and contingencies
 
 
 
Stockholders' equity:
 
 
 
Preferred stock, $.01 par value, 10,000,000 shares authorized, none issued and outstanding
 
 
 
Common stock, $.01 par value, 300,000,000 shares authorized, 115,684,000 and 115,592,000 shares issued and outstanding
1,157
 
 
1,156
 
Paid-in capital
623,745
 
 
622,584
 
Treasury stock
(326
)
 
(326
)
Accumulated other comprehensive income
24
 
 
158
 
Accumulated deficit
(359,123
)
 
(370,212
)
Total stockholders' equity
265,477
 
 
253,360
 
Total liabilities and stockholders' equity
$
321,574
 
 
$
296,557
 
See Accompanying Notes to Unaudited Condensed Consolidated Financial Statements.
 

5


 
LATTICE SEMICONDUCTOR CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
(unaudited)
 
 
Three months ended
 
April 3,
2010
 
April 4,
2009
Cash flows from operating activities:
 
 
 
Net income (loss)
$
11,089
 
 
$
(5,750
)
Adjustments to reconcile net income (loss) to net cash provided by operating activities:
 
 
 
Depreciation and amortization
3,508
 
 
4,100
 
Impairment of Long-term marketable securities
 
 
664
 
Stock-based compensation
1,195
 
 
1,259
 
Changes in assets and liabilities:
 
 
 
Accounts receivable, net
(14,752
)
 
1,140
 
Inventories
1,245
 
 
2,427
 
Prepaid expenses and other current assets
(510
)
 
742
 
Foundry advances (includes advance credits)
6,221
 
 
3,235
 
Accounts payable and accrued expenses (includes restructuring)
3,985
 
 
147
 
Accrued payroll obligations
2,868
 
 
(187
)
Deferred income and allowances on sales to distributors
6,575
 
 
169
 
Other liabilities
(530
)
 
(438
)
Net cash provided by operating activities
20,894
 
 
7,508
 
Cash flows from investing activities:
 
 
 
Proceeds from sales or maturities of marketable securities
5,152
 
 
10,240
 
Purchase of marketable securities
(24,008
)
 
 
Capital expenditures
(1,954
)
 
(798
)
Net cash (used in) provided by investing activities
(20,810
)
 
9,442
 
Cash flows from financing activities:
 
 
 
Payment on yen line of credit
 
 
(805
)
Treasury stock
 
 
(324
)
Net proceeds from issuance of common stock
63
 
 
 
Net share settlement upon issuance of RSUs
(96
)
 
(43
)
Net cash used in financing activities
(33
)
 
(1,172
)
Net increase in cash and cash equivalents
51
 
 
15,778
 
Beginning cash and cash equivalents
156,069
 
 
53,668
 
Ending cash and cash equivalents
$
156,120
 
 
$
69,446
 
Supplemental disclosures of non-cash investing and financing activities:
 
 
 
Unrealized (loss) gain on assets measured at fair value, net, included in Accumulated other comprehensive income
$
(39
)
 
$
831
 
Distribution of deferred compensation from trust assets
$
109
 
 
$
353
 
See Accompanying Notes to Unaudited Condensed Consolidated Financial Statements.
 

6


 
LATTICE SEMICONDUCTOR CORPORATION
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
 
Note 1 - Basis of Presentation and Significant Accounting Policies:
The accompanying Condensed Consolidated Financial Statements are unaudited and have been prepared by Lattice Semiconductor Corporation (the “Company”, “we”, “us” or “our”) pursuant to the rules and regulations of the Securities and Exchange Commission (“SEC”) and in our opinion include all adjustments, consisting of normal recurring adjustments, necessary for the fair statement of results for the interim periods. Certain information and footnote disclosures normally included in financial statements prepared in accordance with generally accepted accounting principles have been condensed or omitted pursuant to such rules and regulations. These Condensed Consolidated Financial Statements should be read in conjunction with our audited financial statements and notes thereto included in our Annual Report on Form 10-K for the fiscal year ended January 2, 2010.
The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts and classification of assets, such as marketable securities, accounts receivable, inventory and deferred income taxes and liabilities, accrued liabilities (including restructuring charges), income taxes and deferred income and allowances on sales to certain distributors, disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the fiscal periods presented. Our most critical estimate relates to auction rate securities, and the estimates of fair value of these securities made in accordance with the provisions of Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) No. 820, “Fair Value Measurements and Disclosures.” Actual results could differ from those estimates.
We report based on a 52 or 53-week fiscal year ending on the Saturday closest to December 31. Our first quarter of fiscal 2010 and first quarter of fiscal 2009 ended on April 3, 2010 and April 4, 2009, respectively. All references to quarterly or three months ended financial results are references to the results for the relevant fiscal period.
 
 
Cash and Cash Equivalents and Marketable Securities
We consider all investments that are readily convertible into cash and have original maturities of three months or less, to be cash equivalents. Cash and cash equivalents consist primarily of highly liquid investments in time deposits or money market accounts and are carried at cost. We account for marketable securities as available for sale with unrealized gains or losses recorded as Other comprehensive income, unless losses are considered other-than-temporary, in which case, losses are charged to the Condensed Consolidated Statements of Operations.
 
Concentration Risk
Potential exposure to concentration risk consist primarily of cash and cash equivalents, marketable securities, trade receivables and supply of wafers for our new products. We place our investments primarily through three financial institutions and mitigate the concentration of credit risk by placing percentage limits on the maximum portion of the investment portfolio which may be invested in any one investment instrument. The Company’s investment policy defines approved credit ratings for investment securities. Purchased securities must meet or exceed the ratings; however, due to liquidity issues in global credit and capital markets, some of our auction rate securities have fallen below our required credit ratings during the past periods. Investments consisted primarily of money market instruments, “C” or better rated auction rate securities, “AA” or better corporate notes and bonds, “AA” or better rated U. S. municipal notes, and U.S. government agency obligations. See Note 4 for a discussion of the liquidity attributes of our marketable securities.
 
Concentration of credit risk with respect to trade receivables are mitigated by a geographically diverse customer base consisting primarily of four large distributors, a large number of OEM customers and several contract manufacturers, as well as by our credit and collection process. Accounts receivable are recorded at the invoice amount, do not bear interest, and are shown net of allowances for doubtful accounts of $1.0 million at both April 3, 2010 and January 2, 2010. We perform credit evaluations for essentially all customers and secure transactions with letters of credit or advance payments where appropriate. We regularly review our allowance for doubtful accounts and the aging of our accounts receivable. Write-offs for uncollected trade receivables have not been significant to date.
 
Current portion of foundry advances include $5.3 million and $11.5 million at April 3, 2010 and January 2, 2010, respectively, pursuant to an agreement with Fujitsu Limited (Fujitsu) in which we agreed to advance $125.0 million to Fujitsu for future wafer purchases. Under the terms of a letter agreement between the Company and Fujitsu, Fujitsu agreed to

7


 
repay in cash to the Company $60.0 million, plus interest, in two installments, $30.0 million of which was received on April 15, 2009 and the remaining $30.0 million was received on October 15, 2009. We expect to receive the remaining advance of approximately $5.3 million in the form of advance credits, including engineering mask set charges, by the end of the second quarter of the Company's fiscal 2010. We rely on Fujitsu for essentially all wafer purchases for our new products. The repayment obligation of Fujitsu is unsecured.
 
Revenue Recognition and Deferred Income
 
Revenue from sales to customers is generally recognized upon shipment provided that persuasive evidence of an arrangement exists, the price is fixed or determinable, title has transferred, collection of resulting receivables is probable, there are no customer remaining acceptance requirements and no remaining significant obligations. We sell our products directly to end customers or through a network of independent manufacturers' representatives and indirectly through a network of independent sell-in and sell-through distributors. Revenue and cost relating to sell-through distributor sales are deferred until either the product is sold by the distributor or return privileges terminate, at which time related distributor resale revenue, effects of distributor price adjustments, and costs are reflected in income. Our revenue reporting is highly dependent on receiving pertinent and accurate data from our distributors in a timely fashion. Distributors provide us periodic data regarding the product, price, quantity, and end customer when products are resold as well as the quantities of our products they still have in stock. We must use estimates and apply judgments to reconcile distributors' reported inventories to their activities. Any error in our judgment could lead to inaccurate reporting of our revenues, deferred income and allowances on sales to distributors, and net income. Revenue from software licensing was not material for the periods presented.
 
We enter into arrangements with certain sell-through distributors to issue accounts receivable credit adjustments (“distributor advances”) to reduce the distributors' working capital required to service our end customers. The distributor advances are for estimated future price discounts and are recorded as a reduction of Deferred income and allowances on sales to distributors. These arrangements are unsecured, bear no interest, are settled on a quarterly basis and are due upon demand. The distributor advances have no impact on revenue recognition and totaled $22.2 million and $16.5 million at April 3, 2010 and January 2, 2010, respectively.
During fiscal 2009, the Company embarked on a program to restructure our distribution channels primarily in the Asia Pacific region, from a sell-in to a sell-through distribution model. As a result, we expect the majority of our revenue in fiscal 2010 will be from reported resale from our sell-through distributors. Resale of product by sell-through distributors as a percentage of our total revenue was 38%, 33% and 36% in fiscal years 2009, 2008 and 2007, respectively, and 55% for the first quarter of fiscal 2010.
New Accounting Pronouncements
In September 2009, the FASB issued Accounting Standards Update 2009-13, “Revenue Recognition (Topic 605): Multiple Deliverable Revenue Arrangements (a consensus of the FASB Emerging Issues Task Force),” (“ASU 2009-13”). ASU 2009-13 provides principles and application guidance on whether multiple deliverables exist, how the arrangement should be separated and the consideration allocated. Additionally, ASU 2009-13 requires an entity to allocate revenue in an arrangement using estimated selling prices of deliverables if a vendor does not have vendor-specific objective evidence or third-party evidence of selling price, eliminates the residual method and requires an entity to allocate revenue using the relative selling price method. This update is effective for the Company beginning January 1, 2011 and can be applied prospectively or retrospectively. Adoption is not expected to materially impact the Company's consolidated financial position, results of operations or cash flows directly when it becomes effective, as the Company will not elect retrospective adoption.
In October 2009, the FASB issued Accounting Standards Update 2009-14, "Software (Topic 985): Certain Revenue Arrangements That Include Software Elements," ("ASU 2009-14"). ASU 2009-14 clarifies which revenue allocation and measurement guidance should be used for arrangements that contain both tangible products and software, in cases where the software is more than incidental to the tangible product as a whole. More specifically, if the software sold with or embedded within the tangible product is essential to the functionality of the tangible product, then this software as well as undelivered software elements that relate to this software are excluded from the scope of existing software revenue guidance. This guidance is to be applied prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. The Company is currently assessing the impact of the adoption on its financial statements.
In January 2010, the FASB issued Accounting Standards Update No. 2010-06, “Fair Value Measurements Disclosures,” which amends Subtopic 820-10 of the FASB Accounting Standards Codification to require new disclosures for fair value measurements and provides clarification for existing disclosures requirements ("ASU No. 2010-06"). More specifically, this update will require (a) an entity to disclose separately the amounts of significant transfers in and out of Levels 1 and 2 fair value measurements and to describe the reasons for the transfers; and (b) information about purchases, sales, issuances and

8


 
settlements to be presented separately (i.e. present the activity on a gross basis rather than net) in the reconciliation for fair value measurements using significant unobservable inputs (Level 3 inputs). This update clarifies existing disclosure requirements for the level of disaggregation used for classes of assets and liabilities measured at fair value and requires disclosures about the valuation techniques and inputs used to measure fair value for both recurring and nonrecurring fair value measurements using Level 2 and Level 3 inputs. ASU No. 2010-06 is effective for the Company for interim and annual reporting beginning after December 15, 2009, with one new disclosure effective after December 15, 2010. The Company has adopted part (a) of this ASU in full with respect to the interim period ended April 3, 2010, and part (b) will be adopted in fiscal year 2011.
 
Note 2 - Net Income (Loss) Per Share:
Net income (loss) per share is computed based on the weighted average number of shares of common stock and potentially dilutive securities assumed to be outstanding during the period using the treasury stock method. Potentially dilutive securities consist of stock options, restricted stock units (“RSUs”) and warrants to purchase shares of common stock. There were no outstanding warrants as of April 3, 2010 or January 2, 2010.
The computation of diluted net income per share for the first quarter of fiscal 2010, includes the effects of stock options and RSUs aggregating 7.3 million shares, as they are dilutive, and excludes the effects of stock options and RSUs aggregating 5.9 million shares, as they are antidilutive. The computation of diluted net loss per share for the first quarter of fiscal 2009, excludes the effects of stock options, RSUs and warrants aggregating 13.7 million shares, because the effect was antidilutive. Stock options, RSUs and warrants are antidilutive when the aggregate of exercise price, unrecognized stock-based compensation expense and excess tax benefit are greater than the average market price for our common stock during the period or when the Company is in a net loss position. Stock options and RSUs that are antidilutive in the first quarter of fiscal 2010 could become dilutive in the future.
 
Note 3 - Marketable Securities:
 
The following table summarizes the contractual maturities of our marketable securities (at fair value and in thousands): 
 
April 3,
2010
 
January 2,
2010
Short-term marketable securities:
$
27,405
 
  
$
8,471
 
 
 
 
 
Long-term marketable securities:
 
  
 
Due after ten years
12,626
 
  
12,743
 
No contractual maturity date
196
 
 
196
 
 
12,822
 
  
12,939
 
Total marketable securities
$
40,227
 
  
$
21,410
 
 
The following table summarizes the composition of our marketable securities (at fair value and in thousands): 
 
April 3,
2010
 
January 2,
2010
Short-term marketable securities:
 
  
 
Corporate and government bonds and notes
$
27,405
 
  
$
8,471
 
 
 
 
 
Long-term marketable securities:
 
  
 
Auction Rate Securities (by type of underlying asset):
 
  
 
Federally-insured or FFELP guaranteed student loans
12,626
 
  
12,743
 
Auction market preferred shares
196
 
 
196
 
 
12,822
 
  
12,939
 
Total marketable securities
$
40,227
 
  
$
21,410
 
 
 

9


 
The following table summarizes the composition of our auction rate securities (in thousands):
 
 
  
April 3, 2010
 
January 2, 2010
 
  
Par Value
 
Fair Value
  
S&P
Credit
rating
  
Par Value
  
Fair Value
  
S&P
Credit
rating
Long-term marketable securities:
 
 
  
 
  
 
  
 
  
 
  
 
Federally-insured or FFELP guaranteed student loans
  
$
15,575
 
  
$
12,626
 
  
AAA
  
$
15,725
 
  
$
12,743
 
  
AAA
Auction market preferred shares
  
8,325
 
  
196
 
  
C
  
8,325
 
  
196
 
  
C
Total long-term marketable securities
  
$
23,900
 
  
$
12,822
 
  
 
  
$
24,050
 
  
$
12,939
 
  
 
 
During the first quarter of fiscal 2010, the Company accepted five partial redemptions at 100% of par value of auction rate securities. The Company intends to sell its auction rate securities as markets for these securities resume or offers become available. At April 3, 2010, due to continued multiple failed auctions and a determination of illiquidity, the auction rate securities held by the Company are classified as Long-term marketable securities.
Student loan asset-backed notes are insured by the federal government or guaranteed by the Federal Family Educational Loan Program (“FFELP”). Auction market preferred shares are issued by Ambac Assurant Corporation (“AMBAC”).
While the auctions for auction rate securities have historically provided a liquid market for these securities, due to liquidity issues in global credit and capital markets, auction rate securities held by us have experienced multiple failed auctions (a portion beginning in October 2007). These instruments are considered illiquid and have been reclassified as Long-term marketable securities on the Condensed Consolidated Balance Sheets. No impairment charges were recognized in the first quarter of fiscal 2010. If we were to liquidate our position in these securities, the amount realized could be materially different than the estimated fair value amounts at which we are carrying these securities and there could be a materially detrimental effect on our financial results.
 
Note 4 - Fair Value of Financial Instruments:
 
 
 
Fair value measurements as of April 3, 2010
 
Total
 
Level 1
 
Level 2
 
Level 3
Short-term marketable securities
$
27,405
 
 
$
27,405
 
 
$
 
 
$
 
Long-term marketable securities
12,822
 
 
 
 
 
 
12,822
 
Total assets measured at fair value
$
40,227
 
 
$
27,405
 
 
$
 
 
$
12,822
 
 
We invest in various financial instruments including corporate and government bonds, notes, commercial paper and auction rate securities. The Company values these instruments at their fair value in accordance with ASC 820. The framework under the provisions of ASC 820 establishes three levels of inputs that may be used to measure fair value. Each level of input has different levels of subjectivity and difficulty involved in determining fair value.
 
Level 1 instruments generally represent quoted prices in active markets. Therefore, determining fair value for Level 1 instruments generally does not require significant management judgment, and the estimation is not difficult. Our Level 1 instruments consist of federal agency, municipal or corporate notes and bonds that are traded in active markets and are classified as Short-term marketable securities on our Condensed Consolidated Balance Sheet.
 
Level 2 instruments include inputs other than Level 1 that are observable, either directly or indirectly, such as quoted
prices for similar assets or liabilities; quoted prices for identical instruments in markets that are not active; or other inputs that
are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities. We have no investments in Level 2 instruments.
 

10


 
Level 3 instruments include unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities. The determination of fair value for Level 3 instruments requires the most management judgment and subjectivity. As a result of failed auctions, our auction rate securities are classified as Level 3 instruments. We employ the services of a valuation firm that specializes in valuing illiquid assets and collect other available market information regarding auction rate securities, which include third party valuation results, investment broker provided market information and available information on the credit quality of the underlying collateral. Our Level 3 instruments are classified as Long-term marketable securities on our Condensed Consolidated Balance Sheet.
During the first quarter of fiscal 2010 and first quarter of fiscal 2009, the following changes occurred in our Level 3 instruments (in thousands):
 
 
Three months ended
 
April 3,
2010
 
April 4,
2009
Beginning fair value of Long-term marketable securities
$
12,939
 
 
$
19,485
 
Fair value of securities sold or redeemed
(117
)
 
 
Temporary or other-than-temporary fluctuations in fair value
 
 
177
 
Ending fair value of Long-term marketable securities
$
12,822
 
 
$
19,662
 
 
In accordance with ASC 320, “Investments-Debt and Equity Securities,” the Company recorded an unrealized loss of less than $0.1 million during the first quarter of fiscal 2010 on certain Short-term marketable securities (Level 1 instruments), which has been recorded in Accumulated other comprehensive income. Future fluctuations in fair value related to these instruments that the Company deems to be temporary, including any recoveries of previous write-downs, would be recorded to Accumulated other comprehensive income. In addition, during the first quarter of fiscal 2010, the Company realized a gain of less than $0.1 million related to the sale of a portion of its Long-term marketable securities portfolio.
 
If the Company were to determine in the future that any further decline in fair value is other-than-temporary, we would record an impairment charge, which could have a materially detrimental impact on our operating results. If we were to liquidate our position in these securities, it is likely that the amount of any future realized gain or loss would be different from the unrealized gain or loss reported in Accumulated other comprehensive income or the previously reported other-than-temporary impairment charge.
 
Note 5 - Inventories (in thousands): 
 
April 3,
2010
 
January 2,
2010
Work in progress
$
15,959
 
  
$
15,046
 
Finished goods
8,721
 
  
10,879
 
 
$
24,680
 
  
$
25,925
 
 

11


 
Note 6 - Changes in Stockholders' Equity and Comprehensive Income (in thousands):
 
Common
stock
  
Paid-in
capital
 
Treasury
stock
 
Accumu-
lated
deficit
 
Accumu-
lated
other
compre-
hensive
income
 
Total
Balances, January 2, 2010
$
1,156
 
  
$
622,584
 
 
$
(326
)
 
$
(370,212
)
 
$
158
 
 
$
253,360
 
Net income for quarter ended April 3, 2010
 
  
 
 
 
 
11,089
 
 
 
 
11,089
 
Unrealized loss, net, related to marketable securities
 
  
 
 
 
 
 
 
(39
)
 
(39
)
Translation adjustments
 
  
 
 
 
 
 
 
(95
)
 
(95
)
Comprehensive income
 
  
 
 
 
 
 
 
 
 
10,955
 
Common stock issued in connection with exercise of stock options, ESPP and vested RSUs (net of taxes)
1
 
  
(34
)
 
 
 
 
 
 
 
(33
)
Stock-based compensation expense related to stock options, ESPP and RSUs
 
  
1,195
 
 
 
 
 
 
 
 
1,195
 
Balances, April 3, 2010
$
1,157
 
  
$
623,745
 
 
$
(326
)
 
$
(359,123
)
 
$
24
 
 
$
265,477
 
 
On December 13, 2008, the Company’s Board of Directors approved a stock repurchase program pursuant to which up to $20.0 million of outstanding common stock may be repurchased from time to time. The duration of the repurchase program was twelve months, and expired on December 13, 2009. During fiscal year 2009, approximately 263,000 shares were repurchased for $0.3 million, all of which were open market transactions and were funded from available working capital. On May 4, 2010, the Board of Directors approved the retirement of repurchased shares.
 
Note 7 - Income Taxes:
We are subject to federal income tax as well as income tax of multiple state and foreign jurisdictions. We are no longer subject to federal, state and local, or foreign income tax examinations for years before 2001. We have federal net operating loss carryforwards that expire at various dates between 2021 and 2030. We have state net operating loss carryforwards that expire at various dates from 2010 through 2030. We also have federal and state credit carryforwards, some of which do not expire, with the remainder expiring at various dates from 2010 through 2030. We have provided a valuation allowance equal to our net federal and state deferred tax assets as we have not met the more likely than not realization threshold for deferred tax asset recognition. We evaluate both positive and negative evidence to determine if some or all of our deferred tax assets should be recognized on a quarterly basis. As of April 4, 2010, the negative evidence, which includes a three year cumulative pretax loss, outweighs the positive evidence available. In future periods, if we determine that the positive evidence is sufficient to conclude that we are more-likely-than-not to realize some or all of our deferred tax assets, we will recognize a deferred tax asset and a benefit in the period in which such determination is made. As of April 4, 2010, the net deferred tax asset relates to foreign jurisdictions where we have concluded it is more likely than not that we will realize the net deferred tax assets in future periods.
The Internal Revenue Service (“IRS”) has examined our income tax returns for 2001 and 2002, and has issued proposed adjustments of $1.4 million, plus interest. These adjustments relate to the treatment of acquisition costs and a tax accounting method change for prepaid expenses. Although we do not agree with the proposed adjustment related to the prepaid expense matter, we believe that we have reached a tentative agreement concerning the acquisition costs. During the three months ended March 29, 2008, we made a payment of $0.3 million related to this tentative agreement. On May 23, 2008, the Company filed a petition with the Tax Court seeking a redetermination of the prepaid expense adjustment. Although the final resolution of this matter is uncertain, we believe that adequate amounts have been provided for as unrecognized tax benefits. There is the possibility of either a favorable or unfavorable effect on our results of operations in the period in which these matters are effectively settled. We will recognize any uncertain tax benefit in the period settled.
We are subject to state and local income tax examinations for the years 2001 through 2003. To date, there are no proposed adjustments that are expected to have a material adverse effect on our results of operations. We are not currently under examination in any foreign jurisdictions.
We believe that it is reasonably possible that $1.5 million of unrecognized tax benefits and $0.8 million of associated interest and penalties could significantly change during the next twelve months. The $2.3 million potential change would

12


 
represent a decrease in unrecognized tax benefits, comprised of items related to matters currently in IRS appeals, certain federal and state credits and uncertain income tax positions related to foreign tax filings for years that will no longer be subject to examination under expiring statutes of limitations.
We are paying foreign income taxes, which are reflected in the Provision (benefit) for income taxes in the Condensed Consolidated Statements of Operations and are primarily related to the cost of operating an offshore research and development subsidiary and sales subsidiaries. We are not currently paying federal income taxes and do not expect to pay such taxes until the benefits of our tax net operating losses are fully utilized. We expect to pay a nominal amount of state income tax. We accrue interest and penalties related to uncertain tax positions in the Provision (benefit) for income taxes.
 
Note 8 - Restructuring:
During the third quarter of fiscal 2009, the Company initiated a restructuring plan to lower operating expenses primarily by reducing headcount, reducing occupancy in certain leased facilities and to transfer inventory management, order fulfillment, and direct sales logistics from its headquarters in Oregon to a third party contractor in Singapore. This restructuring plan was substantially completed in the fourth quarter of fiscal 2009. During December 2009, the Company adopted a restructuring plan under which the Company established an operations center in Singapore. The Company began to transfer some of its supply chain activities from the Company’s headquarters in Oregon to the new operations center in Singapore. This restructuring plan will be substantially completed by the fourth quarter of fiscal 2010. The above plans are collectively referred to as the "2009 restructuring plans".
During the third quarter of fiscal 2008, we initiated a restructuring plan (“2008 restructuring plan”) to better align operating expenses with near-term revenue expectations, primarily by reducing headcount. The 2008 restructuring plan was substantially complete by the end of fiscal 2008. During the third quarter of fiscal 2007, we approved and initiated a restructuring plan to lower operating expenses primarily by reducing headcount. This plan encompassed a reduction in work force, a voluntary separation program for certain employees and the closure of certain leased facilities. During the fourth quarter of fiscal 2005, we initiated and completed a restructuring plan (“2005 restructuring plan”) to reduce operating expenses. The 2005 restructuring plan encompassed three major components - a streamlining of research and development sites, a voluntary separation program for certain employees and an organizational consolidation within the Company’s largest design center.
At April 3, 2010, the Condensed Consolidated Balance Sheet included $1.7 million primarily related to operating lease commitments and severance and related expenses accrued under the provisions of the 2009 restructuring plans. In addition, the Condensed Consolidated Balance Sheet included $0.3 million related to operating lease commitments accrued under the provisions of the 2005 restructuring plan.
The following table displays the activity related to all the restructuring plans described above (in thousands):
 
Balance at
January 2,
2010
 
Charged to
expense during quarter ended April 3, 2010
 
Paid or
settled
 
Adjustments
to reserve
 
Balance at
April 3,
2010
 
Cumulative expense
through January 2, 2010
 
Aggregate
expense and
adjustments
Severance and related costs
$
715
 
 
$
67
 
 
$
(147
)
 
$
 
 
$
635
 
 
$
16,004
 
 
$
16,071
 
Lease loss reserve and other
1,521
 
 
15
 
 
(196
)
 
 
 
1,340
 
 
9,090
 
 
9,105
 
Total restructuring plans
$
2,236
 
 
$
82
 
 
$
(343
)
 
$
 
 
$
1,975
 
 
$
25,094
 
 
$
25,176
 
Total Restructuring charges included in our Condensed Consolidated Statements of Operations were as follows (in thousands):
 
 
Three months ended
 
April 3,
2010
 
April 4,
2009
Severance and related costs
$
67
 
 
$
(1
)
Lease loss reserve and other
15
 
 
(24
)
 
$
82
 
 
$
(25
)
We cannot be certain as to the actual amount of any remaining restructuring charges or the timing of their recognition for financial reporting purposes.

13


 
 
Note 9 - Stock-Based Compensation:
Total stock-based compensation expense included in the Condensed Consolidated Statements of Operations is as follows (in thousands): 
 
 
Three Months Ended
 
April 3,
2010
 
April 4,
2009
Line item:
 
  
 
Cost of products sold
$
75
 
  
$
101
 
Research and development
449
 
  
386
 
Selling, general and administrative
671
 
  
772
 
 
$
1,195
 
  
$
1,259
 
 
On December 22, 2008, the Company’s Board of Directors approved an offer to exchange stock options to purchase up to an aggregate of 7,875,084 shares of the Company’s common stock that were previously granted with an exercise price equal to or greater than $3.91 under the Company’s 1996 Stock Incentive Plan (“the 1996 Plan”) and the Company’s 2001 Stock Plan (“the 2001 Plan”), for new options issuable under the 1996 Plan or new RSUs issuable under the 2001 Plan. The offer was not extended to the Company’s executive officers, members of the board of directors or employees based outside the United States. The offer expired on February 3, 2009 at which time the exchange was consummated. Approximately 300 eligible option holders elected to participate in the exchange and the Company accepted for cancellation options to purchase an aggregate of 3,571,228 shares of the Company’s common stock under the 1996 Plan and options to purchase an aggregate of 2,493,826 shares under the 2001 Plan. Subject to the terms and conditions of the exchange offer, the Company granted new options to purchase up to an aggregate of 727,537 shares of the Company’s common stock under the 1996 Plan and 227,412 RSUs under the 2001 Plan. The stock-based compensation expense impact for the exchange was approximately $0.4 million and is being amortized over four years from the date of exchange.
 
Note 10 - Legal Matters:
On June 11, 2007, a patent infringement lawsuit was filed by Lizy K. John (“John”) against Lattice Semiconductor Corporation in the U.S. District Court for the Eastern District of Texas, Marshall Division. John seeks an injunction, unspecified damages, and attorneys' fees and expenses. The Company filed a request for re-examination of the patent by the United States Patent and Trademark Office (“PTO”), which was granted by the PTO, and the re-examination is in progress. The litigation has been stayed pending the results of the re-examination. Neither the likelihood nor the amount of any potential exposure to the Company can be estimated at this time.
We are also exposed to certain other asserted and unasserted potential claims. There can be no assurance that, with respect to potential claims made against us, we could resolve such claims under terms and conditions that would not have a material adverse effect on our business, our liquidity or our financial results.
 

14


 
Note 11 - Segment and Geographic Information:
We operate in one industry segment comprising the design, development, manufacture and marketing of high performance programmable logic devices. Our revenue by major geographic area based on ship-to location was as follows (dollars in thousands):
 
 
Three Months Ended
 
April 3, 2010
 
April 4, 2009
United States:
$
9,022
 
  
13
%
 
$
7,675
 
  
18
%
Export revenue:
 
  
 
 
 
  
 
Asia Pacific (primarily China and Taiwan)
38,093
 
  
54
 
 
22,930
 
  
53
 
Europe
12,482
 
  
18
 
 
9,189
 
  
21
 
Japan
9,043
 
  
13
 
 
2,600
 
  
6
 
Other Americas
1,792
 
  
2
 
 
942
 
  
2
 
Total export revenue
61,410
 
  
87
 
 
35,661
 
  
82
 
Total revenue
$
70,432
 
  
100
%
 
$
43,336
 
  
100
%
 
Our five largest customers make up a significant portion of our total revenue. In the first quarter of fiscal 2010 and first quarter of fiscal 2009, revenue attributable to two large telecommunications equipment providers (one of which was supported through one of our distributors in prior years), accounted for approximately 13% and 22% of total revenue, respectively. Most of our property and equipment is located in the United States.
 
Note 12- Subsequent Events:
On April 12, 2010, we completed the sale of excess real estate in China resulting in a gain, net of tax, of approximately $0.5 million, which will be recorded as Other income, net in the second quarter of fiscal 2010.
On May 4, 2010, the Board of Directors approved the retirement of shares repurchased under a stock repurchase program initiated on December 13, 2008. Under the repurchase program, which expired on December 13, 2009, approximately 263,000 shares were repurchased.
 

15


 
ITEM 2.     MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Overview
 
Lattice Semiconductor Corporation (“Lattice” or the “Company”) designs, develops and markets high performance programmable logic products and related software. Programmable logic products are widely used semiconductor components that can be configured by the end customer as specific logic circuits, and enable the end customer to shorten design cycle times and reduce development costs. Within the programmable logic market there are two groups of products - programmable logic devices (“PLD”) and field programmable gate arrays (“FPGA”) - each representing a distinct silicon architectural approach. Products based on the two alternative programmable logic architectures are generally optimal for different types of logic functions, although many logic functions can be implemented using either architecture. We believe that a substantial portion of programmable logic customers utilize both PLD and FPGA architectures. Our end customers are primarily original equipment manufacturers in the communications, computing, industrial, consumer, automotive, medical and military end markets.
Critical Accounting Policies and Estimates
Critical accounting policies are those that are both most important to the portrayal of a company's financial condition and results and require management's most difficult, subjective and complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain. Management believes that there have been no significant changes during the three months ended April 3, 2010 to the items that we disclosed as our critical accounting policies and estimates in Management's Discussion and Analysis of Financial Condition and Results of Operations in our Annual Report on Form 10-K for the fiscal year ended January 2, 2010.
The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts and classification of assets, such as marketable securities, accounts receivable, inventory and deferred income taxes and liabilities, such as accrued liabilities (including restructuring charges), income taxes and deferred income and allowances on sales to certain distributors, disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the fiscal periods presented. Our most critical estimate relates to auction rate securities, and the estimates of fair value of these securities made in accordance with the provisions of Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) No. 820, “Fair Value Measurements and Disclosures.” Actual results could differ from those estimates.
Recent Accounting Guidance
In September 2009, the FASB issued Accounting Standards Update 2009-13, “Revenue Recognition (Topic 605): Multiple Deliverable Revenue Arrangements (a consensus of the FASB Emerging Issues Task Force)”, (“ASU 2009-13”). ASU 2009-13 provides principles and application guidance on whether multiple deliverables exist, how the arrangement should be separated and the consideration allocated. Additionally, ASU 2009-13 requires an entity to allocate revenue in an arrangement using estimated selling prices of deliverables if a vendor does not have vendor-specific objective evidence or third-party evidence of selling price, eliminates the residual method and requires an entity to allocate revenue using the relative selling price method. This update is effective for the Company beginning January 1, 2011 and can be applied prospectively or retrospectively. Adoption is not expected to materially impact the Company’s consolidated financial position, results of operations or cash flows directly when it becomes effective, as the Company will not elect retrospective adoption.
In October 2009, the FASB issued Accounting Standards Update 2009-14, "Software (Topic 985): Certain Revenue Arrangements That Include Software Elements," ("ASU 2009-14"). ASU 2009-14 clarifies which revenue allocation and measurement guidance should be used for arrangements that contain both tangible products and software, in cases where the software is more than incidental to the tangible product as a whole. More specifically, if the software sold with or embedded within the tangible product is essential to the functionality of the tangible product, then this software as well as undelivered software elements that relate to this software are excluded from the scope of existing software revenue guidance. This guidance is to be applied prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. The Company is currently assessing the impact of the adoption on its financial statements.
In January 2010, the FASB issued Accounting Standards Update No. 2010-06, “Fair Value Measurements Disclosures,” which amends Subtopic 820-10 of the FASB Accounting Standards Codification to require new disclosures for fair value measurements and provides clarification for existing disclosures requirements ("ASU No. 2010-06"). More specifically, this update will require (a) an entity to disclose separately the amounts of significant transfers in and out of Levels 1 and 2 fair value measurements and to describe the reasons for the transfers; and (b) information about purchases, sales, issuances and settlements to be presented separately (i.e. present the activity on a gross basis rather than net) in the reconciliation for fair value measurements using significant unobservable inputs (Level 3 inputs). This update clarifies existing disclosure

16


 
requirements for the level of disaggregation used for classes of assets and liabilities measured at fair value and requires disclosures about the valuation techniques and inputs used to measure fair value for both recurring and nonrecurring fair value measurements using Level 2 and Level 3 inputs. ASU No. 2010-06 is effective for the Company for interim and annual reporting beginning after December 15, 2009, with one new disclosure effective after December 15, 2010. The Company has adopted part (a) of this ASU in full with respect to the interim period ended April 3, 2010, and part (b) will be adopted in fiscal year 2011.
 
Results of Operations
Revenue
Key elements of our Condensed Consolidated Statements of Operations (dollars in thousands) were as follows: 
 
Three Months Ended
 
April 3, 2010
 
April 4, 2009
Revenue
$
70,432
 
 
100.0
%
 
$
43,336
 
 
100.0
%
 
 
 
 
 
 
 
 
Gross margin
41,168
 
 
58.5
 
 
22,678
 
 
52.3
 
Research and development
14,682
 
 
20.9
 
 
14,891
 
 
34.4
 
Selling, general and administrative
15,418
 
 
21.9
 
 
12,943
 
 
29.9
 
Amortization of intangible assets
 
 
 
 
228
 
 
0.5
 
Restructuring
82
 
 
0.1
 
 
(25
)
 
(0.1
)
Income (loss) from operations
$
10,986
 
 
15.6
%
 
$
(5,359
)
 
(12.4
)%
 
 
 
 
 
 
 
 
Revenue in the first quarter of fiscal 2010 increased 63% to $70.4 million compared to $43.3 million for the first quarter of fiscal 2009. Revenue increased across all geographies, end markets and product lines.
Revenue by Product Line
From a product line viewpoint, in the first quarter of fiscal 2010 when compared to the first quarter of fiscal 2009, there was an 87% increase in FPGA units sold primarily driven by an increase in demand for our FPGA New products. PLD revenue increased across all product classifications in the first quarter of fiscal 2010, when compared to the first quarter of fiscal 2009, due primarily to an 88% increase in units sold.
The composition of our revenue by product line for the first quarter of fiscal 2010 and first quarter of fiscal 2009 was as follows (dollars in thousands):
 
 
Three Months Ended
 
April 3, 2010
 
April 4, 2009
FPGA
$
23,371
 
  
33
%
 
$
15,547
 
  
36
%
PLD
47,061
 
  
67
%
 
27,789
 
  
64
%
Total revenue
$
70,432
 
  
100
%
 
$
43,336
 
  
100
%
 
 Revenue by End Market
The global communications end market accounted for approximately 52% and 63% of our revenue for the first quarter of fiscal 2010 and first quarter of fiscal 2009, respectively. We expect that a significant portion of our revenue will continue to be dependent on the health of the communications end market.

17


 
The composition of our revenue by end market for first quarter of fiscal 2010 and first quarter of fiscal 2009 was as follows (dollars in thousands):
 
Three Months Ended
 
April 3, 2010
 
April 4, 2009
Communications
$
36,404
 
  
52
%
 
$
27,199
 
  
63
%
Industrial and other
14,500
 
  
21
 
 
7,792
 
  
18
 
Computing
10,859
 
  
15
 
 
3,634
 
  
8
 
Consumer and automotive
8,669
 
 
12
 
 
4,711
 
 
11
 
Total revenue
$
70,432
 
 
100
%
 
$
43,336
 
 
100
%
 
 
Revenue by Product Classification
 
Beginning with the first quarter of fiscal 2010, we updated our life cycle categories. Product categories are modified as appropriate relative to our portfolio of products and the generation within each major product family. New products consist of our latest generation of products, while Mainstream and Mature are older or based on unique late stage customer-based production needs. Generally, product categories are adjusted every two to three years, at which time prior periods are reclassified to conform to the new categorization. Had we not updated our life cycle categories our New, Mainstream and Mature quarter revenue by product classification would have been 49%, 32% and 19%, respectively, for the first quarter of fiscal 2010.
Revenue for New products increased 119% for the first quarter of fiscal 2010, compared to the first quarter of fiscal 2009, as a result of increased unit sales partially offset by a decrease in average selling price. Revenue for Mainstream products increased 41% for the first quarter of fiscal 2010 compared to the first quarter of fiscal 2009, with an increase in units sold partially offset by a decrease in average selling price. Mature product revenue increased 36% for the first quarter of fiscal 2010, compared to the first quarter of fiscal 2009, also primarily related to an increase in unit sales partially offset by a decrease in average selling price.
The composition of our revenue by product classification for the first quarter of fiscal 2010 and first quarter fiscal 2009 was as follows (dollars in thousands): 
 
Three Months Ended
 
April 3, 2010
 
April 4, 2009
New *
$
28,006
 
  
40
%
 
$
12,765
 
  
30
%
Mainstream *
24,658
 
  
35
 
 
17,501
 
  
40
 
Mature *
17,768
 
  
25
 
 
13,070
 
  
30
 
Total revenue
$
70,432
 
  
100
%
 
$
43,336
 
  
100
%
 
* Product Classifications:
New:
LatticeECP3, LatticeXP2, LatticeECP2/M. MachXO, Power Manager II, ispClockA/D/S, ispMACH 4000ZE
Mainstream:  
ispXPLD, ispGDX2, ispMACH 4000/Z, ispXPGA, LatticeSC, LatticeECP, LatticeXP, ispClock, Power Manager I, Software and IP
Mature:
FPSC, ORCA 2, ORCA 3, ORCA 4, ispPAC, isplsi 8000V, ispMACH 5000B, ispMACH 2LV, ispMACH 5LV, ispLSI 2000V, ispLSI 5000V, ispMACH 5000VG, all 5-volt CPLDs, GDX/V, ispMACH 4/LV, all SPLDs
Revenue by Geography
Domestic revenue increased for the first quarter of fiscal 2010 when compared to the first quarter of fiscal 2009; however, the percent of total revenue decreased to 13% from 18%, respectively. Export revenue as a percentage of total revenue was 87% for the first quarter of fiscal 2010, compared to 82% for the first quarter of fiscal 2009. Export revenue as a percentage of overall revenue increased primarily due to strength of customers in our Asia Pacific and Japan markets. We believe the export market to Asia Pacific will remain the primary source of our revenue due to more favorable business conditions in Asia Pacific

18


 
and a continuing trend towards outsourcing of manufacturing by North American and European customers to Asia Pacific. Revenue from Japan increased across all end markets.
The composition of our revenue by geography, based on ship-to location, is as follows (dollars in thousands): 
 
Three Months Ended
 
April 3, 2010
 
April 4, 2009
United States:
$
9,022
 
  
13
%
 
$
7,675
 
  
18
%
Export revenue:
 
  
 
 
 
  
 
Asia Pacific (primarily China and Taiwan)
38,093
 
  
54
 
 
22,930
 
  
53
 
Europe
12,482
 
  
18
 
 
9,189
 
  
21
 
Japan
9,043
 
  
13
 
 
2,600
 
  
6
 
Other Americas
1,792
 
  
2
 
 
942
 
  
2
 
Total export revenue
61,410
 
  
87
 
 
35,661
 
  
82
 
Total revenue
$
70,432
 
  
100
%
 
$
43,336
 
  
100
%
Our five largest customers make up a significant portion of our total revenue. In the first quarter of fiscal 2010 and first quarter of fiscal 2009, revenue attributable to two large telecommunications equipment providers (one of which was supported through one of our distributors in prior years), accounted for approximately 13% and 22% of revenue, respectively.
Gross Margin and Operating Expenses
Our gross margin percentage was 58.5% and 52.3% in the first quarter of fiscal 2010 and first quarter of fiscal 2009, respectively. The increase in gross margin percentage was primarily attributed to the higher production levels during the first quarter of fiscal 2010 when compared to fixed overhead costs charged to cost of sales. Additionally, due to the broad based nature of revenue increase, revenue from our Mature and Mainstream products, which typically carry a higher gross margin than our New product categories, increased during the first quarter of fiscal 2010. We continue to benefit from the cost reduction actions undertaken over the last year, primarily lower freight-in costs.
 
Research and development expense was $14.7 million and $14.9 million in the first quarter of fiscal 2010 and first quarter of fiscal 2009, respectively. Research and development expenses consist primarily of personnel, masks, engineering wafers, third-party design automation software, assembly tooling and qualification expenses. The decrease in the first quarter of fiscal 2010 compared to the first quarter of fiscal 2009, was primarily a result of a decrease in labor costs as a result of the restructuring plans implemented in the third and fourth quarters of fiscal 2009 (collectively referred to as the "2009 restructuring plans"). We believe that a continued commitment to research and development is essential to maintain product leadership and provide innovative new product offerings, and therefore we expect to continue to make significant future investments in research and development. As we continue to move to more advanced process technologies such as 65nm, mask and engineering wafer costs are becoming increasingly more expensive and will therefore increasingly represent a greater proportion of total research and development expenses.
Selling, general and administrative expense was $15.4 million and $12.9 million in the first quarter of fiscal 2010 and first quarter of fiscal 2009, respectively. The increase in fiscal 2010 compared to fiscal 2009 was primarily a result of an increase in sales commission related costs and accrued bonus recorded in connection with the 2010 Cash Incentive Compensation Plan.
Amortization of intangible assets was $0.2 million in the first quarter of fiscal 2009. Intangible assets related to the acquisition of the FPGA business of Agere Systems, Inc. on January 18, 2002 became fully amortized during the first quarter of fiscal 2009.
The Company implemented restructuring plans during the fiscal years 2005, 2007, 2008 ("2008 restructuring plan") and 2009. Included in our Condensed Consolidated Statement of Operations and reported as Restructuring charges for the first quarter of fiscal 2010 is a net charge of $0.1 million which is primarily related to severance costs under the 2009 restructuring plans. Included in our Condensed Consolidated Statement of Operations and reported as Restructuring charges for the first quarter of fiscal 2009 is a net credit of less than $0.1 million primarily resulting from changes in original estimates under the 2008 restructuring plan.
 
 

19


 
Other income (expense), net
The following table summarizes the activity in Other income (expense), net (in thousands):
 
Three months ended
 
April 3, 2010
 
April 4, 2009
Interest income
$
247
 
 
$
379
 
Gain (loss) primarily related to sale or impairment of auction rate securities, net
30
 
 
(664
)
Gain (loss) on deferred compensation plan assets and other, net
25
 
 
(227
)
 
$
302
 
 
$
(512
)
The impairment charge in the first quarter of fiscal 2009 was recorded due to the decline on fair value or auction rate securities that are considered illiquid. No comparable charge was recorded in the first quarter of fiscal 2010.
The decrease in interest income is the result of lower interest rates partially offset by higher invested balances in Marketable securities for the first quarter of fiscal 2010 compared to the first quarter of fiscal 2009.
Provision (benefit) for income taxes
We are paying foreign income taxes, which are reflected in the Provision (benefit) for income taxes in the Condensed Consolidated Statements of Operations and are primarily related to the cost of operating an offshore research and development subsidiary and sales subsidiaries. We are not currently paying federal income taxes and do not expect to pay such taxes until the benefits of our tax net operating losses are fully utilized. We expect to pay a nominal amount of state income tax. We accrue interest and penalties related to uncertain tax positions in the Provision (benefit) for income taxes.
 
 
Liquidity and Capital Resources
Financial Condition (Sources and Uses of Cash) (in thousands):
 
Three Months Ended
 
April 3,
2010
 
April 4,
2009
Net cash provided by operating activities
$
20,894
 
 
$
7,508
 
Net cash (used in) provided by investing activities
(20,810
)
 
9,442
 
Net cash used in financing activities
(33
)
 
(1,172
)
Net increase in cash and cash equivalents
$
51
 
 
$
15,778
 
Operating Activities
Net cash provided by operating activities was $20.9 million in the first quarter of fiscal 2010, compared to $7.5 million in the first quarter of fiscal 2009, primarily as a result of an increase in cash flow from Net income (loss) due to a net loss of $5.8 million in the first quarter of fiscal 2009 compared to net income of $11.1 million in the first quarter of fiscal 2010. In addition, Deferred income and allowances on sales to distributors increased from $5.9 million in the first quarter of fiscal 2009 to $16.7 million in the first quarter of fiscal 2010 due to increased activity through sell-through distributors. This was partially offset by an increase in Accounts receivable, net from $25.3 million in the first quarter of fiscal 2009 to $48.3 million in the first quarter of fiscal 2010 due to increased activity through sell-through distributors and increased revenue levels.
Investing Activities
Net cash (used in) provided by investing activities decreased by $30.3 million in the first quarter of fiscal 2010 compared to the first quarter of fiscal 2009. The decrease was due to the purchase of short-term marketable securities in the first quarter of fiscal 2010 compared to a reduction in short-term marketable securities in the first quarter of fiscal 2009. Capital equipment expenditures were $2.0 million and $0.8 million in the first quarter of fiscal 2010 and fiscal 2009, respectively. It is expected that as revenue increases and new products are introduced, capital equipment expenditures, primarily test related equipment, will also increase.

20


 
Financing Activities
Net cash used in financing activities decreased by $1.1 million for the first quarter of fiscal 2010 compared to the first quarter of fiscal 2009 due to the pay down of a credit line and the purchase of Treasury stock in the first quarter of fiscal 2009. No comparable transactions occurred in the first quarter of fiscal 2010.
Liquidity
As of April 3, 2010, our principal source of liquidity was $183.5 million of Cash and cash equivalents and Short-term marketable securities, which were approximately $19.0 million more than the balance of $164.5 million at January 2, 2010. Working capital increased to $218.7 million at April 3, 2010 from $205.5 million at January 2, 2010.
 
Under the terms of a letter agreement between the Company and Fujitsu, Fujitsu agreed to repay in cash to the Company $60.0 million, plus interest, in two installments, of which $30.0 million was received on April 15, 2009 and the remaining $30.0 million was received on October 15, 2009. In addition, as of April 3, 2010, we expect to receive the remaining advance of approximately $5.3 million in the form of advance credits, including engineering mask set charges, by the end of the second quarter of the Company's fiscal 2010, at which time cash flow from operations will no longer include receipts of these credits.
We believe that our existing liquid resources and cash expected to be generated from future operations will be adequate to meet our operating and capital requirements and obligations for at least the next twelve months.
At April 3, 2010 and January 2, 2010, the Company held auction rate securities with a par value of $23.9 million and $24.1 million, respectively. During the first quarter of fiscal 2010, the Company accepted five partial redemptions at 100% of par value of auction rate securities. The Company intends to sell its auction rate securities as markets for these securities resume or offers become available. At April 3, 2010, due to continued multiple failed auctions and a determination of illiquidity, the $23.9 million par value of auction rate securities held by the Company had an estimated fair value of $12.8 million and are classified as Long-term marketable securities. At January 2, 2010, the fair value of auction rate securities held by the Company and classified as Long-term marketable securities was $12.9 million.
Long-term marketable securities with a par value of $15.6 million (estimated fair value of $12.6 million) are exposed to risks associated with student loan asset-backed notes. Such loans are insured by the federal government or guaranteed by the Federal Family Educational Loan Program. Long-term marketable securities with a par value of $8.3 million (estimated fair value of $0.2 million) are auction market preferred shares issued by Ambac Assurant Corporation (“AMBAC”). On August 1, 2009, AMBAC discontinued paying monthly dividends on its auction market preferred shares, which reduced interest income included in Other income (expense), net, by less than $0.1 million per quarter.
While the auctions for auction rate securities have historically provided a liquid market for these securities, due to liquidity issues in global credit and capital markets, auction rate securities held by us have experienced multiple failed auctions (a portion beginning in October 2007). These instruments are considered illiquid and have been reclassified as Long-term marketable securities on the Consolidated Balance Sheets. If we were to liquidate our position in these securities, the amount realized could be materially different than the estimated fair value amounts at which we are carrying these securities and there could be a materially detrimental effect on our financial results.
In accordance with ASC 320, “Investments-Debt and Equity Securities,” the Company recorded an unrealized loss of less than $0.1 million during the first quarter of fiscal 2010, on certain Short-term marketable securities (not auction rate securities) resulting in a carrying cost of $27.4 million, which has been recorded in Accumulated other comprehensive income. Future fluctuations in fair value related to these instruments that the Company deems to be temporary, including any recoveries of previous write-downs, would be recorded to Accumulated other comprehensive income. If the Company were to determine in the future that any further decline in fair value is other-than-temporary, we would record an impairment charge, which could have a materially detrimental impact on our operating results. If we were to liquidate our position in these securities, it is likely that the amount of any future realized gain or loss would be different from the unrealized gain or loss reported in Accumulated other comprehensive income.
On December 13, 2008, the Company’s Board of Directors approved a stock repurchase program pursuant to which up to $20.0 million of outstanding common stock may be repurchased from time to time. The duration of the repurchase program was twelve months, and expired on December 13, 2009. During fiscal year 2009, approximately 263,000 shares were repurchased for $0.3 million, all of which were open market transactions and were funded from available working capital. On May 4, 2010, the Board of Directors approved the retirement of repurchased shares.
We may in the future seek new or additional sources of funding. In addition, in order to secure additional wafer supply, we may from time to time consider various financial arrangements including equity investments, advance purchase payments, loans, or similar arrangements with independent wafer manufacturers in exchange for committed wafer capacity. To the extent that we pursue any such additional financing arrangements, additional debt or equity financing may be required. There can be

21


 
no assurance that such additional financing will be available when needed or, if available, will be on favorable terms. Any future equity financing will decrease existing stockholders’ equity percentage ownership and may, depending on the price at which the equity is sold, result in dilution.
Contractual Obligations
There have been no significant changes to the Company's contractual obligations outside of the ordinary course of business in the first quarter of fiscal 2010 as summarized in Management's Discussion and Analysis of Financial Condition and Results of Operations in the Company's Annual Report on Form 10-K for the year ended January 2, 2010.
Off-Balance Sheet Arrangements
        As of April 3, 2010, we did not have any off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of SEC Regulation S-K.
 

22


 
ITEM 3.     QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Credit Market Risks
At April 3, 2010 and January 2, 2010, we held auction rate securities with a par value of $23.9 million and $24.1 million, respectively. At April 3, 2010, the auction rate securities held by us had an estimated fair value of $12.8 million. At January 2, 2010, the auction rate securities had an estimated fair value of $12.9 million.
Foreign Currency Exchange Rate Risk
We have international subsidiary and branch operations. In addition, a portion of our silicon wafer and other purchases are denominated in Japanese yen and we bill our Japanese customers in yen. We are, therefore, subject to foreign currency exchange rate exposure. These exposures are actively monitored by management, which may employ various strategies, including derivative financial instruments, to mitigate the impact on the Company. We do not hold or issue derivative financial instruments for trading or speculative purposes.
Except for the above, there have been no material changes to the quantitative and qualitative disclosures about market risk reported in our Annual Report on Form 10-K for the year ended January 2, 2010.
 
ITEM 4.     CONTROLS AND PROCEDURES
Conclusion Regarding the Effectiveness of Disclosure Controls and Procedures
Under the supervision and with the participation of our management, including our principal executive officer and our principal financial officer, we conducted an evaluation of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) promulgated under the Securities Exchange Act of 1934, as amended. Based on this evaluation, our principal executive officer and our principal financial officer concluded that our disclosure controls and procedures were effective as of the end of the period covered by this quarterly report.
Changes in Internal Control over Financial Reporting
There has been no change in our internal control over financial reporting that occurred in our quarter ended April 3, 2010 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
 

23


 
PART II. OTHER INFORMATION
 
ITEM 1.     LEGAL PROCEEDINGS
The information set forth above under Note 10 contained in the “Notes to Condensed Consolidated Financial Statements” is incorporated herein by reference.
 
ITEM 1A.     RISK FACTORS
The risk factors included herein include any material changes to and supersede the description of the risk factors associated with our business previously disclosed in Item 1A of our Annual Report on Form 10-K for the year ended January 2, 2010. The following risk factors and other information included in this Quarterly Report should be carefully considered. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial also may impair our business operations. If any of the following risks occur, our business, financial condition, operating results and cash flows could be materially adversely affected.
Global economic conditions and uncertainty, as well as the highly cyclical nature of the semiconductor industry, could adversely affect our revenue, gross margin and expenses, collectability of accounts receivable and supplier relationships, and ability to access capital markets.
Our revenue and gross margin can fluctuate significantly due to downturns in the general economy or the semiconductor industry. These downturns are often severe and prolonged and can result in significant reductions in the demand for PLD and FPGA products in markets in which we compete. Global economic weakness or cyclical downturns have previously resulted from periods of economic recession, reduced access to credit markets, weakening or strengthening of the U.S. dollar relative to other currencies, weak end-user demand, excess industry capacity or general reductions in inventory levels by customers, and may cause a decrease in revenue, gross margin, earnings or growth rates and problems with our ability to manage inventory levels and collect customer receivables. In addition, our relationships with our employees and suppliers and ability to access capital markets could be adversely affected. In addition, customer financial difficulties have previously resulted, and could result in the future, in increases in bad debt write-offs and additions to reserves in our Accounts receivable. Global economic and cyclical downturns also may lead to restructuring actions and associated expenses. Uncertainty about future economic conditions makes it difficult for us to forecast operating results and to make decisions about future investments. Whenever adverse economic, cyclical, or end market conditions exist, there is likely to be an adverse effect on our operating results.
A downturn in the communications equipment end market could cause a reduction in demand for our products and limit our ability to maintain revenue levels and operating results.
The majority of our revenue (approximately 52% of first quarter of fiscal 2010 revenue) is derived from customers participating in the communications equipment end market. In addition, during fiscal year 2009, the Company participated in the China 3G telecommunications network build-out by selling products used by two large telecommunication equipment providers (one of which was supported through one of our distributors), which accounted for approximately 17% of our aggregate revenue during that period. For the first quarter of fiscal 2010, the same two large telecommunication equipment providers accounted for 13% of revenue. In the past, a general weakening in demand for programmable logic products from customers in the communications end market has adversely affected our revenue. Any deterioration in the communication end market or reduction in capital spending to support this end market could lead to a reduction in demand for our products and could adversely affect our revenue and results of operations.
The potential impact of customer design-in activity on future revenue is inherently uncertain and could impact our ability to manage production or our ability to forecast sales.
We face uncertainties relating to the potential impact of customer design-in activity because it is unknown whether any particular customer design-in will ultimately result in sales of significant volume. After a specific customer design-in is obtained, many factors can impact the timing and amount of sales that are ultimately realized from the specific customer design-in. Changes in the competitive position of our technology, the customer's product competitiveness or product strategy, the financial position of the customer, and other factors can impact the timing and amount of sales ultimately realized from any specific customer design-in. As a result, we may not be able to accurately manage the production levels of our new products or accurately forecast the future sales of such products, and adversely affect our revenue and operating results.
We may not be able to successfully compete in the highly competitive semiconductor industry.
The semiconductor industry is intensely competitive and many of our direct and indirect competitors have substantially greater financial, technological, manufacturing, marketing and sales resources. The current level of competition in the programmable logic market is high and may increase in the future. We currently compete directly with companies that have licensed our technology or have developed similar products, including Actel Corporation, Altera Corporation, and Xilinx, Inc. We also compete indirectly with numerous semiconductor companies that offer products based on alternative solutions such as ASIC, ASSP, microcontroller, and digital signal processing (DSP) technologies. These direct and indirect competitors are

24


 
established, multinational semiconductor companies as well as emerging companies. If we are unable to compete successfully in this environment, our future results will be adversely affected.
Our revenue and gross margin, including quarter over quarter, are subject to fluctuations due to many factors which makes our future financial results less predictable.
Our operating results, including quarter over quarter, have fluctuated in the past and may continue to fluctuate. Consequently, our operating results may fail to meet the expectations of analysts and investors. Our revenue and gross margin may fluctuate due to product mix, market acceptance of new products, competitive pricing dynamics, geographical and market-segment pricing strategies, wafer, package and assembly prices and yields, overhead absorption, as well as provisions for warranty and excess and obsolete inventory.
We have limited ability to foresee changes or the pace of changes in sales by product classification. In recent periods, we have experienced increased rates of decline in sales of our mature products. In the past we have also experienced periods of decline in sales of our mainstream products. If, in any period, the overall sales of the combination of our mature and mainstream products decline and if sales of new products do not increase at a rate that is sufficient to counteract this decline, then our total revenue would decline. In addition, as mature products typically generate a higher gross margin than mainstream or new products, a faster than normal decline in sales of mature products could adversely impact our gross margins.
We also have experienced, and may experience in the future, gross margin declines in certain products, reflecting the effect of items such as competitive pricing pressures, inventory write-downs, charges associated with the cancellation of planned production lines, and increases in component and manufacturing costs resulting from higher labor and material costs borne by our manufacturers and suppliers that, as a result of competitive pricing pressures or other factors, we are unable to pass on to our customers.
Further, our ability to predict end customer demand and resale of our products by our sell-through distributors is limited. Typically, the majority of our revenue comes from “turns orders,” which are orders placed and filled within the same period. By definition, turns orders are not captured in a backlog measurement at the beginning of a quarter. Accordingly, we cannot use backlog as a reliable measure of predicting revenue.
Currently Fujitsu is our sole source supplier of wafers for our newest FPGA and PLD products. We may be unsuccessful in defining, developing and identifying manufacturing processes for the new programmable logic products required to maintain or expand our business.
As a semiconductor company, we operate in a dynamic environment marked by rapid product obsolescence. The programmable logic market is characterized by rapid technology and product evolution and historically the market for FPGA products has grown faster than the market for PLD products. Currently we derive a greater proportion of our revenue from PLD products than FPGA products. Consequently, our future success depends on our ability to introduce new FPGA and associated software design tool products that meet evolving customer needs while achieving acceptable margins. We are presently shipping our next generation FPGA product families that are critical to our ability to grow our FPGA product revenue and expand our overall revenue. We also plan to continue upgrading our customer design tool products and increase our offerings of intellectual property cores. If we fail to introduce new products in a timely manner, or if these products or future new products fail to achieve market acceptance, our operating results could be harmed.
The Company and Fujitsu have entered into agreements pursuant to which Fujitsu manufactures most of our new products on its 130 nanometer, 90 nanometer and 65 nanometer CMOS process technologies, as well as on 130 nanometer and 90 nanometer technologies with embedded flash memory that we have jointly developed with Fujitsu. Fujitsu is our sole source supplier of wafers for our newest FPGA and PLD products. The success of certain of our next generation FPGA products is dependent on our ability to successfully partner with Fujitsu or new foundry partners. If for any reason we are unsuccessful in establishing new foundry relationships for our next generation products, our future operating results could be adversely affected.
To develop new products and maintain the competitiveness of existing products, we need to migrate to more advanced wafer manufacturing processes that use smaller device geometries. We also may need to use additional foundry partners. Because we depend upon foundry partners to provide their facilities and support for our process technology development, we may experience delays in the availability of advanced wafer manufacturing process technologies at existing or new wafer fabrication facilities. As a result, volume production of our advanced process technologies at fabrication facilities may not be achieved. This could harm our operating results.
The introduction of new silicon and software design tool products in a dynamic market environment presents significant business challenges. Product development commitments and expenditures must be made well in advance of product sales. The market acceptance of new products depends on accurate projections of long-term customer demand, which by their nature are uncertain. In order to secure new or additional wafer supply, we may from time to time consider various financial arrangements including equity investments, advance purchase payments, loans, or similar arrangements with independent

25


 
wafer manufacturers in exchange for committed wafer capacity. To the extent that we pursue any such additional financing arrangements, additional debt or equity financing may be required. There can be no assurance that such additional financing will be available when needed or, if available, will be on favorable terms. Any future equity financing will decrease existing stockholders’ equity percentage ownership and may, depending on the price at which the equity is sold, result in dilution.
Our future revenue growth is dependent on market acceptance of our new silicon and software design tool products and the continued market acceptance of our current products.
We are presently shipping our next generation FPGA product families that are critical to our ability to grow our FPGA product revenue and expand our overall revenue. We also plan to continue upgrading our customer design tool products and increase our offerings of intellectual property cores. Our future revenue growth is dependent on market acceptance of our new silicon and software design tool products and the continued market acceptance of our current products. The success of these products is dependent on a variety of specific technical factors including:
  • successful product definition;
  • timely and efficient completion of product design;
  • timely and efficient implementation of wafer manufacturing and assembly processes;
  • product performance;
  • product cost; and
  • the quality and reliability of the product.
    If, due to these or other factors, our new silicon and software products do not achieve market acceptance, or our current products do not maintain market acceptance, our operating results may be harmed.
    Export sales, primarily to the Asia Pacific region, account for the majority of our revenue and may decline in the future due to economic and governmental uncertainties.
    We derive the majority of our revenue from export sales. Accordingly, if we experience a decline in export sales, our operating results could be adversely affected. Our export sales are subject to numerous risks, including:
  • changes in local economic conditions;
  • exchange rate volatility;
  • governmental stimulus packages, controls and trade restrictions;
  • export license requirements and restrictions on the export of technology;
  • political instability, war, terrorism or pandemic disease;
  • changes in tax rates, tariffs or freight rates;
  • reduced protection for intellectual property rights in some countries;
  • longer receivable collection periods;
  • natural or man-made disasters in the countries where we sell our products;
  • interruptions in transportation;
  • different labor regulations; and
  • difficulties in staffing and managing foreign sales offices.
    We depend on distributors to generate a majority of our sales and complete order fulfillment. The failure of our distributors to sell our products and otherwise perform as expected could materially reduce our future sales.
    We rely heavily on our distribution partners to sell our products to end customers, generate a majority of our sales, complete order fulfillment and stock our products. Our distributors also help us to provide technical support and other value-added services to end customers.
    At times, our sales are concentrated in a small number of distributors, which are in various international locations and are of various sizes and financial strengths. Financial difficulties, inability to access capital markets, or other reasons, may affect our distributors’ performance, which could materially harm our business and our operating results. Additionally, any reduction in sales efforts, failure to provide good customer service or any other failure to perform by our distributors as expected, could materially reduce our future sales and harm our operating results.
    We rely on our distributors that use the sell-through distribution model to produce resale reports that help us in predicting future sales and revenues. The failure of such distributors to produce accurate and timely resale reports

    26


     
    could affect our ability to make these predictions.
    During fiscal 2009, the Company embarked on a program to restructure its distribution channels, primarily in the Asia Pacific region, from a sell-in to a sell-through distribution model. The sell-in distribution model allows the Company to recognize revenue upon shipment to the distributor. In the sell-through distribution model, distributors have price protection and rights of return on unsold merchandise. Consequently, revenue is recognized upon resale to an end customer. As a result, we expect that the majority of our revenue in fiscal 2010 will be reported resale by our sell-through distributors. Our distributors that use the sell-through distribution model produce resale reports that help us in predicting future sales and revenue recognition. We depend on the timeliness and accuracy of these resale reports from our distributors; late or inaccurate resale reports could have a detrimental effect on our ability to recognize revenue and our ability to predict future sales.
    Our entire long-term marketable securities portfolio is invested in auction rate securities, which at the time of purchase were investment grade and acquired within the guidelines of our then current investment policy. Subsequent to purchase, these auction rate securities were the subject of multiple failed auctions, which adversely affected their liquidity. If auction rate securities continue to experience unsuccessful auctions, or if the credit rating of the auction rate security, auction rate security issuer, the third-party insurer of such investments, the issuers of the investments underlying the securities or credit default swaps deteriorate, we may in the future be required to adjust the carrying value of the auction rate security through impairment charges, and any of these events could have a materially detrimental effect on our liquidity and results of operations.
    At April 3, 2010 and January 2, 2010, the Company held auction rate securities with a par value of $23.9 million and $24.1 million, respectively. The Company intends to sell its auction rate securities as markets for these securities resume or offers become available. At April 3, 2010, due to continued multiple failed auctions and a determination of illiquidity, the $23.9 million par value of auction rate securities held by the Company had an estimated fair value of $12.8 million and are classified as Long-term marketable securities.
    Long-term marketable securities with a par value of $15.6 million (estimated fair value of $12.6 million) are exposed to risks associated with student loan asset-backed notes. Such loans are insured by the federal government or guaranteed by the Federal Family Educational Loan Program. Long-term marketable securities with a par value of $8.3 million (estimated fair value of $0.2 million) are auction market preferred shares issued by Ambac Assurant Corporation (“AMBAC”). On August 1, 2009, AMBAC discontinued paying monthly dividends on its auction market preferred shares.
    While the auctions for auction rate securities have historically provided a liquid market for these securities, due to liquidity issues in global credit and capital markets, auction rate securities held by us have experienced multiple failed auctions (a portion beginning in October 2007). These instruments are considered illiquid and have been reclassified as Long-term marketable securities on the Condensed Consolidated Balance Sheets. If we were to liquidate our position in these securities, the amount realized could be materially different than the estimated fair value amounts at which we are carrying these securities and there could be a materially detrimental effect on our financial results.
    Our wafer supply, which is sourced entirely from the Asia Pacific region, could be interrupted or reduced, which may result in a shortage of products available for sale.
    We do not manufacture finished silicon wafers and most of our products, including all of our newest products, are manufactured by a sole source. Currently, our silicon wafers are manufactured by Fujitsu in Japan, Seiko Epson Corporation in Japan, United Microelectronics Corporation in Taiwan and GLOBALFOUNDRIES in Singapore. If any of our current or future foundry partners significantly interrupts or reduces our wafer supply, or if any of our relationships with our partner suppliers are terminated, our operating results could be materially harmed.
    In the past, we have experienced delays in obtaining wafers and in securing supply commitments from our foundry partners. At present, we anticipate that our supply commitments are adequate. However, these existing supply commitments may not be sufficient for us to satisfy customer demand in future periods. Additionally, notwithstanding our supply commitments, we may still have difficulty in obtaining wafer deliveries consistent with the supply commitments. We negotiate wafer prices and supply commitments from our suppliers on at least an annual basis. If any of our foundry partners were to reduce its supply commitment or increase its wafer prices, and we cannot find alternative sources of wafer supply, our operating results could be harmed.
    Many other factors that could disrupt our wafer supply are beyond our control. Since worldwide manufacturing capacity (and that of Fujitsu) for silicon wafers is limited and inelastic, we could be harmed by significant industry-wide (or our own) increases in overall wafer demand or interruptions in wafer supply. During periods of economic uncertainty, our foundry partners may reduce or restructure their operations which may also affect the availability of wafers and adversely affect our operating results. Additionally, a future disruption of any of our foundry partners’ foundry operations as a result of a fire, earthquake, act of terrorism, political unrest, governmental uncertainty, war, disease or other natural disaster or catastrophic event could disrupt our wafer supply and could harm our operating results.

    27


     
    All of our major silicon wafer suppliers operate fabrication facilities located in Asia. Additionally, our finished silicon wafers are assembled and tested by independent contractors located in Indonesia, Japan, Malaysia, the Philippines, Singapore and South Korea. Economic, financial, social and political conditions in Asia have historically been volatile. Financial difficulties, the effects of currency fluctuation, governmental actions or restrictions, prolonged work stoppages, political unrest, war, natural disaster, disease or any other difficulties experienced by our suppliers may disrupt our supply and could harm our operating results.
    If our foundry partners’ wafer costs increase or if our foundry partners experience quality or yield problems, we may face a shortage of products available for sale and our revenue or gross margin could be adversely affected.
    We depend on our foundry partners to deliver high quality silicon wafers with acceptable yields in a timely manner. As is common in our industry, we have experienced wafer yield problems and delivery delays. If our foundry partners are unable for a prolonged period to produce silicon wafers that meet our specifications, with acceptable yields, or wafer costs increase, our operating results could be harmed.
    The reliable manufacture of high performance programmable logic devices is a complicated and technically demanding process requiring:
  • a high degree of technical skill;
  • state-of-the-art equipment;
  • the availability of certain basic materials and supplies, such as chemicals, gases, polysilicon, silicon wafers and     ultra-pure metals;
  • the absence of defects in production wafers;
  • the elimination of minute impurities and errors in each step of the fabrication process; and
  • effective cooperation between the wafer supplier and us.
    As a result, our foundry partners may periodically increase costs or experience difficulties in achieving acceptable quality and yield levels when manufacturing our silicon wafers.
    Product quality problems could lead to reduced revenue, gross margins and net income.
    We generally warrant our products for varying lengths of time against non-conformance to our specifications and certain other defects. Because our products, including hardware, software and intellectual property cores, are highly complex and increasingly incorporate advanced technology, our quality assurance programs may not detect all defects, whether manufacturing defects in individual products or systematic defects that could affect numerous shipments. Inability to detect a defect could result in increased engineering expenses necessary to remediate the defect and also result in increased costs due to inventory impairment charges. On occasion we have also repaired or replaced certain components and software or refunded the purchase price or license fee paid by our customers due to product defects. If there are material increases in product defects, the costs to remediate such defects, or the costs to resolve warranty claims compared with our historical experience, our revenue, gross margins, and net income may be adversely affected.
    Our supply of assembled and tested products, all from the Asia Pacific region, could be interrupted or reduced, which may result in a shortage of products available for sale.
    We do not assemble our finished products or perform all testing of our products. Currently, our finished products are assembled and may be tested by independent contractors in Indonesia, Japan, Malaysia, the Philippines, Singapore and South Korea or elsewhere in Asia. If any of our current or future assembly or test contractors significantly interrupts or reduces our supply of assembled and tested devices, our operating results could be harmed.
    In the past, we have experienced delays in obtaining assembled and tested products and in securing assembly and test capacity commitments from our suppliers. At present, we anticipate that our assembly and test capacity commitments are adequate; however, these existing commitments may not be sufficient for us to satisfy customer demand in future periods. Additionally, notwithstanding our assembly and test capacity commitments, we may still have difficulty in obtaining deliveries of finished products consistent with the capacity commitments. We negotiate assembly and test prices and capacity commitments from our contractors on a periodic basis. If any of our assembly or test contractors were to reduce its capacity commitment or increase its prices, and we cannot find alternative sources, our operating results could be harmed.
    Many other factors that could disrupt our supply of finished products are beyond our control. Because worldwide capacity for assembly and testing of semiconductor products is limited and inelastic, we could be harmed by significant industry-wide increases in overall demand or interruptions in supply. The assembly of complex packages requires a consistent supply of a variety of raw materials such as substrates, lead frames and mold compound. The worldwide manufacturing capacity for these materials is also limited and inelastic. A significant industry-wide increase in demand, or interruptions in the supply of these materials to our assembly or test contractors, could harm our operating results. Additionally, a future disruption

    28


     
    of any of our assembly or test contractors’ operations as a result of a fire, earthquake, act of terrorism, political unrest, governmental uncertainty, war, disease or other natural disaster or catastrophic event could disrupt our supply of assembled and tested devices and could harm our operating results.
    In addition, our quarterly revenue levels may be affected to a significant extent by our ability to match inventory and current production mix with the product mix required to fulfill orders. The large number of individual parts we sell and the large number of customers for our products, combined with limitations on our and our customers’ ability to forecast orders accurately and our relatively lengthy manufacturing cycles, may make it difficult to achieve a match of inventory on hand, production units, and shippable orders sufficient to realize quarterly or annual revenue projections.
    If our assembly and test supply contractors experience quality or yield problems, we may face a shortage of products available for sale.
    We rely on contractors to assemble and test our devices with acceptable quality and yield levels. As is common in our industry, we have experienced quality and yield problems in the past. If we experience prolonged quality or yield problems in the future, our operating results could be harmed.
    The majority of our revenue is derived from semiconductor devices assembled in advanced packages. The assembly of advanced packages is a complex process requiring:
  • a high degree of technical skill;
  • state-of-the-art equipment;
  • the absence of defects in assembly and packaging manufacturing;
  • the elimination of raw material impurities and errors in each step of the process; and
  • effective cooperation between the assembly contractor and us.
    As a result, our contractors may experience difficulties in achieving acceptable quality and yield levels when assembling and testing our semiconductor devices.
    We depend upon a third party to provide inventory management, order fulfillment, and direct sales logistics.
    We rely on a third party vendor located in Singapore to provide cost-effective and efficient supply chain services. Among other activities, these outsourced services relate to direct sales logistics, including order fulfillment, inventory management and warehousing, and distribution of inventory to third party distributors. If our third party supply chain partner were to discontinue services for us or its operations are disrupted as a result of a fire, earthquake, act of terrorism, political unrest, governmental uncertainty, war, disease or other natural disaster or catastrophic event, our ability to fulfill direct sales orders and distribute inventory timely, cost effectively, or at all, would be hindered which could harm our business.
    If our independent software and hardware developers and suppliers are unable or unwilling to meet our contractual requirements, we may face a delay or shortage of the introduction of new products, or the support of existing products.
    We rely on independent software and hardware developers for the design, development, supply and support of IP cores, design and development software, and certain elements of demonstration boards. As a result, failure or significant delay to complete software or hardware under contract to deliver could disrupt the release of or introduction of new products, which might be detrimental to the capability of our new products to win designs. Any of these delays or inability to complete the design or development could have an adverse effect on our business, financial condition, or operating results.
    We may fail to retain or attract the specialized technical and management personnel required to successfully operate our business.
    To a greater degree than most non-technology companies or larger technology companies, our future success depends on our ability to attract and retain highly qualified technical and management personnel. As a mid-sized company, we are particularly dependent on a relatively small group of key employees. Competition for skilled technical and management employees is intense within our industry. As a result, we may not be able to retain our existing key technical and management personnel. In addition, we may not be able to attract additional qualified employees in the future. If we are unable to retain existing key employees or are unable to hire new qualified employees, our operating results could be adversely affected.
    We are currently implementing a new enterprise-wide financial reporting system which may cause operating or reporting disruptions.
    In fiscal 2009, the Company initiated the implementation of an enterprise-wide financial reporting (“ERP”) system to improve processes, enhance the access and timeliness of critical business information and strengthen controls throughout the Company. We currently anticipate converting to this new system later in 2010. Many companies have experienced operating or reporting disruptions when converting to a new ERP system, including limitations on a company’s ability to deliver and bill for customer shipments, maintain current and complete books and records, maintain an effective internal control environment and

    29


     
    meet external reporting deadlines. While we do not currently anticipate any significant disruptions to our business, any major difficulty in the conversion to the new reporting system could negatively impact the Company’s business, results of operations and cash flows.
    An acquisition may harm our business, financial condition or operating results.
    We have made acquisitions in the past to execute on our business strategy which creates uncertainty to our future operating results and cash flows. We may acquire products, technologies or businesses from third parties. An acquisition will require considerable management time and may divert time away from operations, require substantial cash resources, require us to incur or assume debt, and involve the issuance of the Company’s equity securities. The success of any acquisition requires the integration of products, technologies, personnel and administrate resources, and could result in departures of key personnel, equity dilution or acquisition of unknown liabilities. As a result, an acquisition could disrupt our operations and may have an adverse effect on our business, financial condition or operating results.
    We may have failed to adequately insure against certain risks, and, as a result, our financial condition and results may be adversely affected.
    We carry insurance customary for companies in our industry, including, but not limited to, liability, property and casualty, worker's compensation and business interruption insurance. We also self-insure our employees for basic medical expenses, subject to a true insurance stop loss for catastrophic illness. In addition, we have insurance contracts that provide director and officer liability coverage for our directors and officers. Other than the specific areas mentioned above, we are self-insured with respect to most other risks and exposures, and the insurance we carry in many cases is subject to a significant policy deductible or other limitation before coverage applies. Based on management's assessment and judgment, we have determined that it is more cost effective to self-insure against certain risks than to incur the insurance premium costs. The risks and exposures for which we self-insure include, but are not limited to, natural disasters, product defects, political risk, theft, patent infringement and some employment practice matters. Should there be a catastrophic loss due to an uninsured event such as an earthquake or a loss due to adverse occurrences in any area in which we are self-insured, our financial condition, results of operations and liquidity may be adversely affected.
    If we are unable to adequately protect our intellectual property rights, our financial results and competitive position may suffer.
    Our success depends in part on our proprietary technology; however, we may fail to adequately protect this technology. As a result, our competitive position may be harmed or we may face significant expense to protect or enforce our intellectual property rights.
    We intend to continue to protect our proprietary technology through patents, copyrights and trade secrets. Despite this intention, we may not be successful in achieving adequate protection. Claims allowed on any of our patents may not be sufficiently broad to protect our technology. Patents issued to us also may be challenged, invalidated or circumvented. Finally, our competitors may develop similar technology independently.
    Companies in the semiconductor industry vigorously pursue their intellectual property rights. If we become involved in protracted intellectual property disputes or litigation we may be forced to use substantial financial and management resources, which could have an adverse affect on our operating results.
    We face risks related to patent litigation.
    Our industry is characterized by frequent claims regarding patents and other intellectual property rights of others. We have been, and from time to time expect to be, notified of claims that we are infringing upon the intellectual property rights of others. For instance, we are exposed to certain asserted and unasserted potential claims, including the pending patent litigation brought against us by Lizy K. John as described in Item 1. Legal Proceedings, above. If any third party makes a valid claim against us, we could face significant liability and could be required to make material changes to our products and processes. In response to any claims of infringement, there can be no assurance that we would be able to successfully defend against the claims. Any such litigation could result in a substantial diversion of our efforts and the use of substantial management and financial resources, which by itself could have a material adverse effect on our financial condition and operating results. We may seek licenses under patents that we are alleged to be infringing; however, we may not be able to obtain a license on favorable terms, or at all, which could have an adverse effect on our operating results.
     

    30


     
    ITEM 2. UNREGISTERED SALES OF SECURITIES AND USE OF PROCEEDS
     
    2. Issuer purchases of equity securities
     
    On December 13, 2008, the Company’s Board of Directors approved a stock repurchase program pursuant to which up to $20.0 million of outstanding common stock may be repurchased from time to time. The duration of the repurchase program was twelve months, and expired on December 13, 2009. During fiscal 2009, approximately 263,000 shares were repurchased for $0.3 million, all of which were open market transactions and were funded from available working capital. On May 4, 2010, the Board of Directors approved the retirement of repurchased shares.
     
     

    31


     
    ITEM 6.     EXHIBITS
    Exhibit Number
     
    Description
     
     
     
    3.1
     
    The Company’s Restated Certificate of Incorporation filed February 24, 2004 (Incorporated by reference to Exhibit 3.1 filed with the Company’s Annual Report on Form 10-K for the year ended January 3, 2004).
     
     
     
    3.2
     
    The Company’s Bylaws, as amended and restated as of January 31, 2006 (Incorporated by reference to Exhibit 99.1 filed with the Company’s Current Report on Form 8-K filed February 3, 2006).
     
     
     
    4.4
     
    Indenture, dated as of June 20, 2003, between the Company and U.S. Bank National Association (Incorporated by reference to Exhibit 4.1 filed with the Company’s Registration Statement on Form S-3 on August 13, 2003).
     
     
     
    4.5
     
    Form of Note for the Company’s Zero Coupon Convertible Subordinated Notes (Incorporated by reference to Exhibit 4.2 filed with the Company’s Registration Statement on Form S-3 on August 13, 2003).
     
     
     
    10.23
     
    Advance Production Payment Agreement dated March 17, 1997 among Lattice Semiconductor Corporation and Seiko Epson Corporation and S MOS Systems, Inc. (Incorporated by reference to Exhibit 10.23 filed with the Company’s Annual Report on Form 10-K for the fiscal year ended January 1, 2005)(1).
     
     
     
    10.24*
     
    Lattice Semiconductor Corporation 1996 Stock Incentive Plan, as amended, and Related Form of Option Agreement (Incorporated by reference to Exhibits (d)(1) and (d)(2) to the Company’s Schedule TO filed on February 13, 2003).
     
     
     
    10.33*
     
    2001 Outside Directors' Stock Option Plan, as amended and restated effective May 1, 2007 (Incorporated by reference to the Appendix A filed with the Company's 2007 Definitive Proxy Statement on Schedule 14A filed on April 5, 2007).
     
     
     
    10.34*
     
    2001 Stock Plan, as amended, and related Form of Option Agreement (Incorporated by reference to Exhibits (d)(3) and (d)(4) to the Company’s Schedule TO filed on February 13, 2003).
     
     
     
    10.35
     
    Intellectual Property Agreement by and between Agere Systems Inc. and Agere Systems Guardian Corporation and Lattice Semiconductor Corporation as Buyer, dated January 18, 2002 (Incorporated by reference to Exhibit 10.35 filed with the Company’s Annual Report on Form 10-K for the year ended December 29, 2001).
     
     
     
    10.37*
     
    Lattice Semiconductor Corporation Executive Deferred Compensation Plan, as amended and restated effective as of August 11, 1997 (Incorporated by reference to Exhibit 99.3 filed with the Company’s Registration Statement on Form S-3, as amended, dated October 17, 2002).
     
     
     
    10.38*
     
    Amendment No. 1, to the Lattice Semiconductor Corporation Executive Deferred Compensation Plan, as amended, dated November 19, 1999 (Incorporated by reference to Exhibit 99.4 filed with the Company’s Registration Statement on Form S-3, as amended, dated October 17, 2002).
     
     
     
    10.39
     
    Registration Rights Agreement, dated as of June 20, 2003, between the Company and the initial purchaser named therein (Incorporated by reference to Exhibit 4.3 filed with the Company’s Registration Statement on Form S-3 on August 13, 2003).
     
     
     
    10.41*
     
    Form of Indemnification Agreement executed by each director and executive officer of the Company and certain other officers and employees of the Company and its subsidiaries (Incorporated by reference to Exhibit 10.41 filed with the Company’s Annual Report on Form 10-K for the year ended January 3, 2004).
     
     
     
    10.42
     
    Amendment dated March 25, 2004 to Advance Production Payment Agreement dated March 17, 1997, as amended, among Lattice Semiconductor Corporation and Seiko Epson Corporation and S MOS Systems, Inc. (Incorporated by reference to Exhibit 10.42 filed with the Company’s Quarterly Report on Form 10-Q for the quarter ended April 3, 2004)(1).
     
     
     
    10.43
     
    Advance Payment and Purchase Agreement dated September 10, 2004 between Lattice Semiconductor Corporation and Fujitsu Limited (Incorporated by reference to Exhibit 10.1 filed with the Company’s Quarterly Report on Form 10-Q for the quarter ended October 2, 2004)(1).
     
     
     
    10.44*
     
    Employment Agreement between Lattice Semiconductor Corporation and Stephen A. Skaggs dated August 9, 2005 (Incorporated by reference to Exhibit 99.1 filed with the Company’s Current Report on Form 8-K filed on August 12, 2005).
     
     
     
    10.45*
     
    Compensation Arrangement between Lattice Semiconductor Corporation and Patrick S. Jones, Chairman of the Board of Directors (Incorporated by reference to Exhibit 99.2 filed with the Company’s Current Report on Form 8-K filed on August 12, 2005).
     
     
     
    10.46*
     
    Employment Agreement between Lattice Semiconductor Corporation and Jan Johannessen dated November 1, 2005 (Incorporated by reference to Exhibit 10.1 filed with the Company’s Quarterly Report on Form 10-Q filed on November 4, 2005).

    32


     
    Exhibit Number
     
    Description
     
     
     
    10.47*
     
    Employment Agreement between Lattice Semiconductor Corporation and Martin R. Baker dated November 1, 2005 (Incorporated by reference to Exhibit 10.2 filed with the Company’s Quarterly Report on Form 10-Q filed on November 4, 2005).
     
     
     
    10.48*
     
    Employment Agreement between Lattice Semiconductor Corporation and Stephen M. Donovan dated November 1, 2005 (Incorporated by reference to Exhibit 10.3 filed with the Company’s Quarterly Report on Form 10-Q filed on November 4, 2005).
     
     
     
    10.50*
     
    Compensation Arrangement between Lattice Semiconductor Corporation and Chairpersons for Committees of the Board of Directors (Incorporated by reference to Exhibit 99.1 filed with the Company’s Current Report on Form 8-K filed on December 12, 2005).
     
     
     
    10.51*
     
    Form of Amendment to Stock Option Agreements for 1996 Stock Incentive Plan, as amended, and 2001 Stock Plan, as amended (Incorporated by reference to Exhibit 99.3 filed with the Company’s Current Report on Form 8-K filed on December 12, 2005).
     
     
     
    10.52*
     
    2006 Executive Bonus Plan (Incorporated by reference to Exhibit 99.4 filed with the Company’s Current Report on Form 8-K filed on December 12, 2005).
     
     
     
    10.53
     
    Addendum dated March 22, 2006 to the Advance Payment and Purchase Agreement dated September 10, 2004 between Lattice Semiconductor Corporation and Fujitsu Limited (Incorporated by reference to Exhibit 10.53 filed with the Company’s Quarterly Report on Form 10-Q filed on November 7, 2006).
     
     
     
    10.54
     
    Addendum No. 2 dated effective October 1, 2006 to the Advance Payment and Purchase Agreement dated September 10, 2004 between Lattice Semiconductor Corporation and Fujitsu Limited (Incorporated by reference to Exhibit 10.54 filed with the Company’s Quarterly Report on Form 10-Q filed on November 7, 2006)(1).
     
     
     
    10.55*
     
    2007 Executive Variable Compensation Plan, as amended (Incorporated by reference to Exhibit 99.1 filed with the Company’s Current Report on Form 8-K filed on December 7, 2006, as amended as described in the Company’s Current Report on Form 8-K filed on February 8, 2007).
     
     
     
    10.56*
     
    Form of Notice of Grant of Restricted Stock Units to Executive Officer (Incorporated by reference to Exhibit 99.1 filed with the Company’s Current Report on Form 8-K filed on February 8, 2007).
     
     
     
    10.57*
     
    2008 Executive Variable Compensation Plan, as amended (Incorporated by reference to Exhibit 99.1 filed with the Company’s Current Report on Form 8-K filed on December 7, 2007).
     
     
     
    10.58*
     
    Letter Agreement between Lattice Semiconductor Corporation and Stephen A. Skaggs dated January 31, 2008 (Incorporated by reference to Exhibit 10.58 filed with the Company’s Annual Report on Form 10-K filed on March 13, 2008).
     
     
     
    10.59*
     
    Employment Agreement between Lattice Semiconductor Corporation and Bruno Guilmart dated May 14, 2008 (Incorporated by reference to Exhibit 99.1 filed with the Company’s Current Report on Form 8-K filed on June 16, 2008).
     
     
     
    10.60*
     
    Employment Agreement between Lattice Semiconductor Corporation and Byron Milstead dated May 14, 2008 (Incorporated by reference to Exhibit 10.60 filed with the Company’s Current Report on Form 10-Q filed on August 8, 2008).
     
     
     
    10.61*
     
    Form of Inducement Stock Option Agreement (Incorporated by reference to Exhibit 10.61 filed with the Company’s Current Report on Form 10-Q filed on November 5, 2008).
     
     
     
    10.62*
     
    Employment Agreement between Lattice Semiconductor Corporation and Michael G. Potter dated February 4, 2009 (Incorporated by reference to Exhibit 99.2 filed with the Company’s Current Report on Form 8-K filed on February 4, 2009).
     
     
     
    10.63*
     
    2009 Bonus Plan of Lattice Semiconductor Corporation (Incorporated by reference to Exhibit 10.63 filed with the Company’s Annual Report on Form 10-K filed on March 13, 2009).
     
     
     
    10.64
     
    Addendum #4 dated effective December 18, 2009 to the Advanced Payment and Purchase Agreement dated September 10, 2004 between Lattice Semiconductor Corporation and Fujitsu Limited (Incorporated by reference to Exhibit 10.64 filed with the Company’s Annual Report on Form 10-K filed on March 13, 2009).
     
     
     
    10.65
     
    Letter Agreement effective December 18, 2008 re Repayment of Advance Payment between Lattice Semiconductor Corporation and Fujitsu Microelectronics Limited and Fujitsu Microelectronics America, Inc (Incorporated by reference to Exhibit 10.65 filed with the Company’s Annual Report on Form 10-K filed on March 13, 2009).
     

    33


     
    Exhibit Number
     
    Description
     
     
     
    10.66*
     
    Employment Agreement between Lattice Semiconductor Corporation and Byron Milstead effective as of December 30, 2008 (Incorporated by reference to Exhibit 10.66 filed with the Company’s Annual Report on Form 10-K filed on March 13, 2009).
     
     
     
    10.67*
     
    Employment Agreement between Lattice Semiconductor Corporation and Sean Riley dated September 22, 2008 (Incorporated by reference to Exhibit 10.67 filed with the Company’s Current Report on Form 10-Q filed on April 4, 2009).
     
     
     
    10.68*
     
    Employment Agreement between Lattice Semiconductor Corporation and Christopher M. Fanning amended and restated as of December 15, 2008 (Incorporated by reference to Exhibit 10.68 filed with the Company’s Current Report on Form 10-Q filed on April 4, 2009).
     
     
     
    10.69*
     
    Lattice Semiconductor Corporation 2010 Cash Incentive Compensation Plan (Incorporated by reference to Exhibit 10.69 filed with the Company's Annual Report on Form 10-K filed on March 10, 2010.
     
     
     
    31.1
     
    Certification of Chief Executive Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934, as amended.
     
     
     
    31.2
     
    Certification of Chief Financial Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934, as amended.
     
     
     
    32.1
     
    Certification of Chief Executive Officer pursuant to 18 U.S.C. 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
     
     
     
    32.2
     
    Certification of Chief Financial Officer pursuant to 18 U.S.C. 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
    (1)
    Pursuant to Rule 24b-2 under the Securities Exchange Act of 1934, confidential treatment has been granted to portions of this exhibit, which portions have been deleted and filed separately with the Securities and Exchange Commission.
    *
    Management contract or compensatory plan or arrangement required to be filed as an Exhibit to this Annual Report on Form 10-K pursuant to Item 15(b) thereof.
    (b) See (a)(3) above.
    (c) See (a)(1) and (2) above.
     
     

    34


     
    SIGNATURES
    Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
     
                                                                                                      
    LATTICE SEMICONDUCTOR CORPORATION
                                                                                                      
    (Registrant)
                                                                                                      
     
                                                                                                      
    /s/ MICHAEL G. POTTER 
                                                                                                      
    Michael G. Potter
                                                                                                      
    Corporate Vice President and Chief Financial Officer
                                                                                                      
    (Duly Authorized Officer and Principal Financial
                                                                                                      
    and Accounting Officer)
     
    Date: May 5, 2010 

    35