Form 10-K
Table of Contents

 

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 10-K

 

 

 

  x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2011

 

  ¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 001-34220

3D SYSTEMS CORPORATION

(Exact name of Registrant as specified in our charter)

 

Delaware   95-4431352
(State or other jurisdiction of
incorporation or organization)
  (I.R.S. Employer
Identification No.)

333 Three D Systems Circle

Rock Hill, SC 29730

(Address of principal executive offices and zip code)

(803) 326-3900

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

 

Name of Each Exchange on Which Registered

Common stock, par value $0.001 per share   The New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨        No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨        No  x

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x        No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨        No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer  x   Accelerated filer  ¨   Non-accelerated filer  ¨           Smaller reporting company  ¨
                          (Do not check if smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act.)    Yes  ¨        No  x

The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant on June 30, 2011 was $839,190,936. For purposes of this computation, it has been assumed that the shares beneficially held by directors and officers of the registrant were “held by affiliates.” This assumption is not to be deemed an admission by these persons that they are affiliates of the registrant.

The number of outstanding shares of the registrant’s common stock as of February 16, 2012 was 50,881,072.

DOCUMENTS INCORPORATED BY REFERENCE: Portions of the registrant’s definitive proxy statement for its 2012 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

 

 

 

 


Table of Contents

3D SYSTEMS CORPORATION

Annual Report on Form 10-K for the

Year Ended December 31, 2011

Table of Contents

 

PART I

     2   

Item 1.

   Business      2   

Item 1A.

   Risk Factors      12   

Item 1B.

   Unresolved Staff Comments      21   

Item 2.

   Properties      21   

Item 3.

   Legal Proceedings.      22   

Item 4.

   Mine Safety Disclosures      23   

PART II

     23   

Item 5.

   Market for Registrant’s Common Equity, Related Stockholder Matters, Issuance of Unregistered Securities and Issuer Purchases of Equity Securities      23   

Item 6.

   Selected Financial Data      26   

Item 7.

   Management’s Discussion and Analysis of Financial Condition and Results of Operations      27   

Item 7A.

   Quantitative and Qualitative Disclosures about Market Risk      51   

Item 8.

   Financial Statements and Supplementary Data      52   

Item 9.

   Changes in and Disagreements with Accountants on Accounting and Financial Disclosure      52   

Item 9A.

   Controls and Procedures      52   

Item 9A(T).

   Controls and Procedures      53   

Item 9B.

   Other Information      53   

PART III

     54   

Item 10.

   Directors, Executive Officers and Corporate Governance      54   

Item 11.

   Executive Compensation      54   

Item 12.

   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters      54   

Item 13.

   Certain Relationships and Related Transactions and Director Independence      54   

Item 14.

   Principal Accounting Fees and Services      54   

PART IV

     55   

Item 15.

   Exhibits, Financial Statement Schedules      55   

 

1


Table of Contents

PART I

 

Item 1. Business

General

3D Systems Corporation (“3D Systems” or the “Company”) is a holding company that operates through subsidiaries in the United States, Europe and the Asia-Pacific region, and we distribute our products in those areas as well as into other parts of the world. We are a leading provider of 3D content-to-print solutions including 3D printers, print materials and on-demand custom parts services for professionals and consumers alike. We also provide creative content development and design productivity tools. Our expertly integrated solutions replace, displace and complement traditional methods and reduce the time and cost of designing new products.

3D printers can print almost anything from smartphone and tablet covers, to finished jewelry and toys, from custom hearing aids, individualized prosthetics and orthodontics to functional airplane, unmanned aerial vehicles and car parts. Over the past decade complete industries’ manufacturing processes have been converted from traditional methods to 3D printing and Digital Manufacturing. Instead of investing in expensive tooling for mass production, incurring long lead-times and costly freight charges to ship products around the world, 3D printing allows customers to mass customize and locally print what they need, when they need it in a more cost effective way, while significantly reducing undesired environmental impacts of traditional manufacturing.

We pioneered 3D printing and Digital Manufacturing with the invention of Stereolithography over 25 years ago and subsequently developed Selective Laser Sintering, Multi-Jet Modeling and Film Transfer Imaging. Over the past decade many companies enhanced their competitive advantage by embracing 3D printing to transform their new product design and rapid prototyping activities and transitioned to new Direct Manufacturing of end use parts and custom products. Today we continue to drive the adoption of large-scale custom manufacturing solutions by a variety of aerospace, defense, transportation and healthcare users worldwide.

We are committed to democratizing access and accelerating adoption of our products and services for the benefit of professionals and consumers alike. We are extending the range of our affordable printing solutions from the automotive and entertainment industries to middle school classrooms and garage-entrepreneurs.

We partnered with multiple primary and secondary schools to equip children and young adults with tomorrow’s competitive and marketable Science, Technology, Engineering and Mathematics skills that are required to achieve and sustain our national competitive advantage. In partnership with educators, we developed support programs that create 3D labs in schools, elementary through university level. At the university level 3D labs are researching and developing new materials and new print processes, ranging from ceramics to chocolate, while at the elementary level children are learning how to create, connect and communicate in 3D as they see their ideas come to life as 3D printed models.

Our portfolio of 3D printers is based on several unique print engines that employ proprietary, additive layer printing processes designed to meet our customers’ most demanding design, prototyping, testing, tooling and production requirements. Our principal print engines include stereolithography, or SLA®, printers, selective laser sintering, or SLS®, printers, multi-jet modeling, or MJM™, printers, film transfer imaging, or FTI printers, selective laser melting, or SLM printers, and plastic jet printers (“PJP”). We believe that our 3D printer solutions and services enable our customers to develop and manufacture better quality, higher functionality, new products faster and more economically than with traditional methods.

Our printers utilize a wide range of proprietary print materials that we develop, blend and market to print real parts. Our print materials are designed to replicate the performance of specific engineered plastics, composites and metals. We augment and complement our own portfolio of print materials with materials that we purchase from third parties under private label and distribution arrangements.

We also provide our customers content creation CAD software and proprietary digital workflow preparation and management software tools that are embedded within our printers together with pre-sale and post-sale services, ranging from applications development and custom engineered production solutions to installation, warranty and maintenance services. We also provide a comprehensive suite of on-demand printed parts services to satisfy

 

2


Table of Contents

our customers’ entire design-to-manufacturing requirements, offering a broad range of precision plastic and metal parts capabilities produced from a wide range of 3D printing and traditional materials using a variety of additive and traditional manufacturing processes.

We continue to develop new products and services and have expanded our technology platform through internal development efforts, relationships with third parties and acquisitions. We maintain ongoing product development programs that are focused on providing our customers with an expanded portfolio of 3D content-to-print solutions targeting their entire design-to-manufacturing requirements from rapid prototyping services to on-site office, model-shop and production floor printers. We are focusing on developing a comprehensive menu of affordable to own and operate 3D printing solutions to address applications in the education, transportation, recreation, healthcare, consumer products and energy marketplaces, which we believe represent significant growth opportunities for our business.

In rapid manufacturing applications, our printers are used to manufacture functional end-use parts that have the appearance and performance of high-quality injection-molded parts. Customers who adopt our rapid manufacturing solutions avoid the significant costs of complex set-ups and changeovers and eliminate the costs and lead times associated with conventional tooling methods or labor intensive craftsmanship. Rapid manufacturing enables our customers to produce optimized designs because they can design for function, unconstrained by normal design-for-manufacture considerations.

In rapid prototyping applications, our printers are used to quickly and efficiently generate product-concept models, functional prototypes to test form, fit and function, master patterns and expendable patterns for urethane and investment casting that are often used for evaluating product designs and short-run production.

In communication and design applications, our printers are used to produce presentation models, primarily for visualizing and communicating concepts, various design elements and other activities, including supply chain management and functional models.

In our consumer solutions applications, we provide our customers with intuitive, simple to use content creation and content download capabilities empowering our customers to design, create and make with coloring book simplicity.

We provide expertly integrated solutions consisting of printers, print materials, software tools and a variety of related on-demand parts and other customer services. Our extensive solutions portfolio enables us to offer our customers cost effective ways to transform the manner in which they design, develop and manufacture their products.

Recent Developments

On November 21, 2011, we entered into a stock purchase agreement to purchase all of the outstanding capital stock of Z Corporation, a Massachusetts corporation (“Z Corp”), and Vidar Systems Corporation, a Virginia corporation (“Vidar”), from Contex Group A.S. for up to $137 million in cash. This purchase price was subject to certain adjustments provided for in the stock purchase agreement, which included a provision that the seller would be entitled to retain any cash held by Z Corp and Vidar at the time of the closing except for an agreed upon amount to be included in no less than $6.6 million of working capital of Z Corp and Vidar that would be delivered to us at the closing of the acquisition. Completion of this transaction was subject to certain conditions set forth in the stock purchase agreement, and that agreement contained certain covenants, representations and warranties among the parties. We completed the closing under the stock purchase agreement on January 3, 2012 and paid the $135.5 million purchase price in cash at that time, net of cash received and subject to final closing adjustments. At the date of this Annual Report on Form 10-K (“Form 10-K”), those final closing adjustments have not yet been completed, but we believe that they will not be material to our consolidated financial condition or results of operations.

Z Corp is a provider of personal and professional 3D printers, 3D scanners, proprietary print materials and services. Z Corp provides us with an additional print engine, Three Dimensional Printing Technology (“3DPT”) capable of printing in full color. The Z Corp product line complementarily fits into our personal and professional printer categories and fills in our 3D printer price points and doubles our reseller channel. Vidar is a provider of medical film scanners that digitize film for radiology, oncology, mammography and dental applications. Vidar

 

3


Table of Contents

provides us with a distribution channel of resellers that are specifically focused on healthcare, expanding our healthcare solutions portfolio and reach.

Also on November 21, 2011, we completed the private placement of $152 million of 5.50% senior convertible notes due 2016. The net proceeds of these notes were used to pay the purchase price of the Z Corp and Vidar acquisition disclosed above and for general corporate purposes. We issued these notes under an indenture dated as of November 22, 2011 at a price of 98% of the $152 million aggregate principal amount. After deducting this original issue discount and commissions provided for on the placement of the notes, the net proceeds of this private placement amounted to $145.4 million These notes are senior unsecured obligations and rank equal in right of payment with all our existing and future senior unsecured indebtedness. They are also senior in right of payment to any subordinated indebtedness that we may incur in the future. These notes are convertible into shares of our Common Stock at an initial conversion rate of 46.6021 shares of Common Stock per $1,000 principal amount of notes, equivalent to an initial conversion rate of approximately $21.46 per share of Common Stock. Unless earlier repurchased, redeemed or converted, the notes will mature on December 15, 2016. The conversion rate is subject to adjustment in certain circumstances as more fully set forth in the indenture covering the notes.

In January 2012, we launched our first home 3D printer, the Cube, an affordable simple to use 3D printer for children and adults alike. Concurrently, we launched Cubify.com, a marketplace and meeting place where artists, designers, children and makers can sell their 3D designs and anyone can pay to download and 3D print them. Cubify.com provides a business model and platform for individuals and garage-entrepreneurs to access 3D design tools and printing resources, empowering startups to succeed and grow.

Products and Services

Printers and Other Products

All our 3D printers employ one of the above-mentioned print engines. Our 3D printers convert data input from CAD software or 3D scanning and sculpting devices to printed plastic or metal parts using our proprietary engineered plastic, metal and composite print materials. Production printers include our SLA®, SLS® and SLM printers. Our professional printers category includes MJM printers and SLA® crossover printers. Personal printers include our FTI and PJP printers.

We develop, blend and market a wide range of proprietary print materials that replicate the performance of engineered plastics, composites and metals. We augment and complement our own portfolio of print materials with materials that we purchase from third parties under private label and distribution arrangements.

We provide our customers proprietary software tools and a library of content files. We also provide software embedded within our printers and design productivity software tools. In addition, we provide pre-sale and post-sale services, ranging from applications development to installation, warranty and maintenance services.

We provide a comprehensive suite of printed parts services through our on-demand custom parts services. Our on-demand custom parts services offer a broad range of precision plastic and metal parts service capabilities produced from a wide range of 3D printing and traditional materials using a variety of additive and traditional manufacturing processes.

Production 3D Printer Solutions

Customers use our production printers (SLA®, SLS®, SLM) to produce highly accurate geometries and/or very durable parts for applications in various industries, including aerospace, automotive, and healthcare solutions

SLA® Printers

Our stereolithography printers convert our proprietary, engineered print materials and composites into solid cross-sections, layer by layer, to print the desired fully fused objects. Our SLA® printers are capable of making multiple distinct parts at the same time and are designed to produce highly accurate geometries in a wide range of sizes and shapes with a variety of material performance characteristics.

 

4


Table of Contents

SLA® parts are known for their fine feature detail, resolution and surface quality. Product designers, engineers and marketers in many manufacturing companies throughout the world use our SLA® printers for a wide variety of applications, ranging from short production runs of end-use products to producing prototypes for automotive, aerospace and various consumer and electronic applications.

Our SLA® printers are capable of rapidly producing tools, fixtures, jigs and end-use parts, including parts for dental, hearing aid, jewelry and motor-sports applications. They are also designed for uses such as building functional models that enable users to share ideas and evaluate concepts, perform form, fit and function tests on working assemblies and build expendable patterns for metal casting.

Our family of SLA® printers offers a wide range of capabilities, including size, speed, accuracy, throughput and surface finish in different formats and price points. Our iPro™ SLA® printers come in a variety of print formats designed to quickly and economically produce durable plastic parts with unprecedented surface smoothness, feature resolution, edge definition and tolerances that rival the accuracy of CNC-machined plastic parts. Our iPro™ family of SLA® printers includes the iPro™ 8000 and iPro 9000, production stereolithography printers capable of printing ultra-high-definition parts made from our integrated portfolio of proprietary Accura® Plastics. We also offer the Viper™, a smaller format SLA® printer that delivers lower throughput, but is capable of printing precision ultra-high-resolution parts.

SLS® Printers

Our selective laser sintering printers convert our proprietary, engineered print materials and composites by melting and fusing (sintering) these print materials into solid cross-sections, layer by layer, to produce finished parts. SLS® printers can create parts from a variety of proprietary engineered plastic powders and are capable of processing multiple parts in a single build session.

Customer uses of our SLS® printers include functional test models and end-use parts, which enable our customers to create customized parts economically without tooling. The combination of print materials flexibility, part functionality and high throughput of our SLS® print engine makes it well suited for rapid manufacturing of durable parts for applications in various industries, including aerospace, automotive, packaging, machinery and motor-sports applications.

Our family of SLS® printers comes in a variety of print formats and degrees of automation and includes our line of sPro 60, 140 and 230 SLS® printers. Our SLS® production printers are designed to enable our customers to mass customize and produce high-quality, end-use parts, patterns, fixtures and tools consistently and economically from our proprietary engineered plastics, on site and on demand.

SLM Printers

We offer the Sinterstation® Pro SLM direct metal sintering printer through a private label arrangement with a third party supplier. These printers come in two print formats and are capable of producing fully-dense direct metal parts from a variety of metal powders, including stainless steel, chrome cobalt, titanium and tool steel.

Professional 3D Printer Solutions

Our professional printers are used in engineering and design environments for product development, architecture, marketing communication, higher education teaching and research and for custom manufacturing of advanced oral and orthopedic restorative devices, custom jewelry and mass customized toys, action figures and collectibles. Our range of professional printers is based on our proprietary MJM print engine and SLA® print engine.

Our professional printers convert digital 3D input data, one slice thickness at a time, to print a solid part, one layer at a time. These printers offer superior finished surfaces, freedom of geometry creation, plug-and-play installation, point-and-print functionality and best-in-class part resolution in a variety of price points and print materials.

 

5


Table of Contents

Our family of professional printers consists of several ProJet models, including the Projet 3000, Projet 3000 Plus, Projet 5000 and Projet 6000, our first crossover 3D printer bringing SLA® print technology together with MJM utility and usability. Our professional printers are designed to print high-definition, functional and durable models for form, fit and function analysis, including certain models that are capable of ultra-fine resolution for precision dental and jewelry applications

Personal 3D Printer Solutions

Our personal 3D printers print ready-to-use functional parts at home, school or office workstations. These kits and printers enable designers, engineers, hobbyists, do it yourselfers and students to imagine, design and print their ideas at their desks. Our range of personal printers is based on FTI and PJP print engines.

Our offering of personal printers includes the ProJet 1000, ProJet 1500, 3DTouch and RapMan personal printers. These 3D printers utilize FTI and PJP technologies.

Our FTI personal 3D printers print durable plastic parts with a smooth surface finish and true to design detailed features. Parts printed on these ProJet printers can be drilled, machined, painted and metal-plated after building and ProJet 1500 parts can be printed in six different colors.

Our PJP based 3D personal printers and kits utilize a proven, simple clean, compact and quiet print engine technology designed for office, home and classroom use. Our PJP printers are designed and engineered to be simple, accurate and robust and some are equipped with up to three compact precision print heads for print speed, accuracy and fast material changeovers.

3D Print Materials

As part of our integrated solutions approach, we blend, market, sell and distribute consumable, engineered plastic and metal materials and composites under several leading brand names for use in all our printers. We market our stereolithography materials under the Accura® and RenShape® brands, our selective laser sintering materials under the DuraForm®, CastForm and LaserForm brands, and materials for our professional printers under the VisiJet® brand. We augment and complement our own portfolio of print materials with materials that we purchase from third parties under private label and distribution arrangements.

Our currently offered printers have built-in intelligence that communicates vital processing and quality statistics in real time. For these printers, we furnish integrated print materials that are specifically designed for use in those printers and that are packaged in smart cartridges designed to enhance system functionality, up-time, materials shelf life and overall printer reliability, with the objective of providing our customers with a built-in quality management system.

We work closely with our customers to optimize the performance of our print materials in their applications. Our expertise in print materials formulation, combined with our process, software and equipment-design strengths, enable us to help our customers select the print material that best meets their needs and obtain optimal cost and performance results. We also work with third parties to develop different types and varieties of print materials designed to meet the needs of our customers.

SLA® Print Materials and Composites

Our family of proprietary stereolithography materials and composites offers a variety of plastic-like performance characteristics and attributes designed to mimic specific, engineered, thermoplastic materials. When used in our SLA® printers, our proprietary liquid resins turn into a solid surface one layer at a time, and through an additive building process all the layers bond and fuse to make a solid part.

Our portfolio of Accura® and RenShape® stereolithography materials includes general purpose as well as specialized materials and composites that offers customers the opportunity to choose the material that is best suited for the parts and models that they intend to produce.

To further complement and expand the range of materials we offer to our customers, we also distribute SLA® materials under recognized third-party brand names.

 

6


Table of Contents

SLS® Print Materials and Composites

Our family of proprietary selective laser sintering materials and composites includes a range of rigid plastic, elastomeric and metal materials as well as various composites of these ingredients. Our SLS® printers have built-in versatility; therefore, the same printers can be used to process multiple materials.

Our DuraForm® laser sintering materials include CastForm and LaserForm proprietary SLS® materials. SLS® materials are used to create functional end-use parts, prototypes and durable patterns as well as assembly jigs and fixtures. They are also used to produce flexible, rubber-like parts such as shoe soles, gaskets and seals; patterns for investment casting; functional tooling such as injection molding tool inserts; and end-use parts for customized rapid manufacturing applications.

Examples of rapid manufacturing parts produced by our customers using our SLS® printers include air ducts for military aircraft and engine cowling parts for unmanned aerial vehicles. Product designers and developers from major automotive, aerospace and consumer products companies use DuraForm® parts extensively as functional test models, including in harsh test environment conditions. Aerospace and medical companies use our SLS® printers to produce end-use parts directly, which enables them to create customized parts economically without tooling. Parts made from DuraForm® and LaserForm materials are cost effective and can compete favorably with traditional manufacturing methods, especially where part complexity is high.

VisiJet® Print Materials

Our family of VisiJet® print materials includes part-building materials and compatible disposable support materials that are used in the modeling process and facilitate an easily melted support removal process. These print materials are sold to our customers packaged in proprietary smart cartridges designed for our personal and professional 3D printers. Our proprietary VisiJet® print materials are ideal for study models and form, fit and function engineering studies. VisiJet® wax print materials and special dissolvable support materials are used for direct casting applications such as custom jewelry manufacturing, dental crowns and bridge work and other casting and micro-casting applications.

BFB Print Materials

Our family of print materials for use in the 3D Touch and RapMan includes polylatic acid (PLA), acrylonitrile butadiene styrene (ABS), polypropylene (PP), high density polyethylene (HDPE), low density polyethylene (LDPE), and unplasticised polyvinyl chloride (uPVC). These print materials offer a variety of properties, including tough polymer materials for car bumpers, tough and flexible polymers for face masks or containers, and chemical and solvent resistant materials for fuel tanks, snowboards and water pipes.

Services

Warranty, Maintenance and Training Services

We provide a variety of customer services and local application support and field support on a worldwide basis for all our stereolithography and selective laser sintering 3D printers. For our personal and professional 3D printers, we provide these services and field support either directly or through a network of authorized resellers or other sources. We are continuing to build a reseller channel for our line of personal and professional 3D printers and to train our resellers to perform installation and maintenance services for those printers. We have also entered into arrangements with selected outside service providers to augment our service capabilities for each of our lines of equipment.

The services and field support that we provide includes installation of new printers at customers’ sites, printer warranties, several maintenance agreement options and a wide variety of hardware upgrades, software updates and performance enhancement packages. We also provide services to assist our customers and resellers in developing new applications for our technologies, to facilitate the use of our technology for the customers’ applications, to train customers on the use of newly acquired printers and to maintain our printers at customers’ sites.

 

7


Table of Contents

New personal, professional and production printers are sold with maintenance support that generally covers a warranty period ranging from 90 days to one year. We offer service contracts that enable our customers to continue maintenance coverage beyond the initial warranty period. These service contracts are offered with various levels of support and are priced accordingly. We employ customer-support sales engineers in North America, in several countries in Europe and in parts of the Asia-Pacific region to support our worldwide customer base. As a key element of warranty and service contract maintenance, our service engineers provide regularly scheduled preventive maintenance visits to customer sites. We also provide training to our distributors and resellers to enable them to perform these services.

We distribute spare parts on a worldwide basis to our customers, primarily from locations in the U.S. and Europe.

We also offer upgrade kits for certain of our printers that enable our existing customers to take advantage of new or enhanced system capabilities; however, we have discontinued upgrade support for certain of our older legacy printers.

On-Demand Parts Services

We launched our rapid prototyping and printed parts service in October 2009. Through our on-demand custom parts service, we provide an extensive suite of custom parts services through our 3Dproparts and Quickparts® global network of fulfillment facilities. 3Dproparts and Quickparts® are two leading custom parts service brands that offer a broad range of precision plastic and metal parts service capabilities produced from a wide range of print and traditional materials using a variety of additive and traditional manufacturing processes. Customers may procure a complete range of precision plastic and metal parts services using a variety of finishing, molding and casting capabilities utilizing both traditional and additive processes. In addition, preferred service providers and leading service bureaus can use our on-demand custom parts service as their comprehensive order-fulfillment center.

We are continuing to expand our on-demand custom parts service by bringing together a wide range of production and additive grade print materials and the latest additive and traditional manufacturing systems to deliver to our customers the broadest available range of precision plastic and metal parts and assemblies. Since October 2009, we have acquired twelve service providers in the U.S., Europe and Asia-Pacific, enhancing our North American and European presence and expanding our local presence into Australia, the Benelux countries and China.

Global Operations

We operate in North America, Europe and the Asia-Pacific region, and distribute our products and services in those areas as well as to other parts of the world. Revenue in countries outside the U.S. accounted for 48.9%, 54.7% and 56.6% of consolidated revenue in the years ended December 31, 2011, 2010 and 2009, respectively.

In maintaining foreign operations, our business is exposed to risks inherent in such operations, including currency fluctuations. Information on foreign exchange risk appears in Part II, Item 7A, “Quantitative and Qualitative Disclosures about Market Risk” and Item 8, “Financial Statements and Supplementary Data,” of this Form 10-K, which information is incorporated herein by reference.

Financial information about geographic areas, including revenue and long-lived assets, appears in Note 22 to the Consolidated Financial Statements in Part II, Item 8, “Financial Statements and Supplementary Data,” of this Form 10-K, which information is incorporated herein by reference.

Marketing and Customers

Our sales and marketing strategy focuses on an integrated approach that is directed to providing 3D printing solutions and services to meet a wide range of customer needs, including traditional prototyping, 3D printing and rapid manufacturing. This integrated approach includes the sales and marketing of our parts service, either as an adjunct to a customer’s in-house use of additive technologies or to the much broader audience of users who do not have dedicated production or professional 3D printers.

 

8


Table of Contents

Our sales organization is responsible for the sale of our products on a worldwide basis and for the management and coordination of our growing network of authorized resellers. We sell some of our products through our direct sales force and others through resellers. Our direct sales force consists of salespersons who work throughout North America, Europe and the Asia-Pacific region. Our application engineers provide professional services through pre-sales support and assist existing customers so that they can take advantage of our latest print materials and techniques to improve part quality and machine productivity. This group also leverages our customer contacts to help identify new application opportunities that utilize our proprietary processes and access to our on-demand parts printing service, 3Dproparts and Quickparts®. As of December 31, 2011, our worldwide sales, application and service staff consisted of 171 employees.

We sell production printers and our related print materials and services through our direct sales organization, which is supported by our dedicated sales, service and application engineers worldwide. In certain areas of the world where we do not operate directly, we have appointed sales agents, resellers and distributors who are authorized to sell our production printers and the print materials used in them on our behalf. Certain of those agents, resellers and distributors also provide services to customers in those geographic areas.

Our personal and professional printers and our related print materials and services are sold worldwide directly and through a network of authorized distributors and resellers who are managed and directed by a dedicated team of channel sales managers.

As a complement to our printers and print materials sales, we maintain our on-demand custom parts service, a global network of parts printing service locations branded as 3Dproparts and QuickParts®. Our parts service is designed to provide our customers a single source for all of their design-to-manufacturing needs. Through our on-demand parts service, we offer access to a wide range of additive and traditional manufacturing technologies, our full line of available print materials from plastics to metals and our project management and finishing capabilities through a powerful e-commerce platform with on-line quoting, plug-ins and secure ordering.

In 2011, as part of our consumer solutions initiative, we added content, design productivity tools and design and curation services to our offerings through a series of acquisitions and internal developments. As we democratize access to affordable 3D printers and services, our target customer base has expanded to small companies, entrepreneurs, enthusiasts and consumers who are not professional CAD users. We provide this expanded audience access to simple and easy to use 3D printable content, software and tools to capture and customize content for sharing and 3D printing through our personal 3D printers, Freedom of Creation and The3dStudio.com content, design and curation services and Alibre® design productivity tools. These products and services are distributed through multiple channels with an emphasis on web based online sales and an inside sales team, complemented by specialized software resellers and printer resellers.

Our customers include major companies and small and midsize businesses in a broad range of industries, including manufacturers of automotive, aerospace, computer, electronic, defense, education, consumer, energy and healthcare products. Purchasers of our printers include original equipment manufacturers (OEMs), government agencies and universities that generally use our printers for research activities, and independent service bureaus that provide rapid prototyping and manufacturing services to their customers. No single customer accounted for more than 10 percent of our consolidated revenue in the years ended December 31, 2011, 2010 or 2009.

Production and Supplies

We outsource certain production printer assembly and refurbishment activities to several selected design and engineering companies and suppliers. These suppliers also carry out quality control procedures on our printers prior to their shipment to customers. As part of these activities, these suppliers have responsibility for procuring the components and sub-assemblies that are used in our printers. This has reduced our need to procure or maintain inventories of raw materials, work-in-process and spare parts related to our equipment assembly and maintenance activities. We purchase finished printers from these suppliers pursuant to forecasts and customer orders that we supply to them. While the outsourced suppliers of our printers have responsibility for the supply chain of the components for the printers they assemble, the components, parts and sub-assemblies that are used in our printers are generally available from several potential suppliers.

 

9


Table of Contents

We assemble our ProJet personal and professional 3D printers and other equipment at our Rock Hill, South Carolina facility, enabling us to better utilize our facility, plan production and lower costs. Our RapMan and 3DTouch printers are assembled at our facility in Clevedon, England.

We produce certain print materials at our facilities in Marly, Switzerland and Rock Hill, South Carolina. We also have arrangements with third parties who blend to our specifications certain print materials that we sell under our own brand names. As discussed above, we also purchase print materials from third parties for resale to our customers.

Our equipment assembly and print materials blending activities and certain research and development activities are subject to compliance with applicable federal, state and local provisions regulating the storage, use and discharge of materials into the environment. We believe that we are in compliance, in all material respects, with such regulations as currently in effect and that continued compliance with them will not have a material adverse effect on our capital expenditures, results of operations or consolidated financial position.

Research and Development

The 3D printing industry is characterized by rapid technological change. Consequently, we have an ongoing program of research and development to develop new printers and print materials and to enhance our product lines as well as to improve and expand the capabilities of our printers and related software and print materials. This includes all significant technology platform developments for our print engines and print materials. Our development efforts are augmented by development arrangements with research institutions, customers, suppliers of material and hardware and the assembly and design firms that we have engaged to assemble our printers. We also engage third party engineering companies and specialty print materials companies in specific development projects from time to time.

In addition to our internally developed technology platforms, we have acquired products or technology developed by others by acquiring business entities that held ownership rights to the technology. In other instances we have licensed or purchased the intellectual property rights of technologies developed by third parties through licensing agreements that may obligate us to pay a license fee or royalty, typically based upon a dollar amount per unit or a percentage of the revenue generated by such products. As noted below, the amount of such royalties was not material to our results of operations or consolidated financial position for the three-year period ended December 31, 2011.

Research and development expenses were $14.3 million, $10.7 million and $11.1 million in 2011, 2010 and 2009, respectively.

We capitalized software development costs of $7.9 million and $1.2 million from acquisitions in 2011 and 2010, respectively. We did not capitalize any software development costs in 2009. See Note 6 to the Consolidated Financial Statements.

Intellectual Property

We regard our technology platforms and materials as proprietary and seek to protect them through copyrights, patents, trademarks and trade secrets. At December 31, 2011, we held 725 patents worldwide. At that date, we also had 257 pending patent applications worldwide, including applications covering inventions contained in our recently introduced printers. The principal issued patents covering aspects of our various technologies will expire at varying times through 2027.

We are also a party to various licenses that have had the effect of broadening the range of the patents, patent applications and other intellectual property available to us.

We have also entered into licensing or cross-licensing arrangements with various companies in the United States and in other countries that enable those companies to utilize our technologies in their products or that enable us to use their technologies in our products. Under certain of these licenses, we are entitled to receive, or we are obligated to pay, royalties for the sale of licensed products in the U.S. or in other countries. The amount of such royalties was not material to our results of operations or consolidated financial position for the three-year period ended December 31, 2011.

 

10


Table of Contents

We believe that, while our patents and licenses provide us with a competitive advantage, our success depends primarily on our marketing, business development and applications know-how and on our ongoing research and development efforts. Accordingly, we believe the expiration of any of the patents, patent applications or licenses discussed above would not be material to our business or financial position.

Competition

We face competition from the development of new technologies or techniques not encompassed by the patents that we own or license, from the conventional machining, plastic molding and metal casting techniques discussed above and from improvements to existing technologies, such as Computer Numerical Control (“CNC”) machining and rotational molding.

Competition for most of our 3D printers is based primarily on process know-how, product application know-how and the ability to provide a full range of products and services to meet customer needs. Competition is also based upon innovations in 3D printing, rapid prototyping and rapid manufacturing printers and print materials. Accordingly, our ongoing research and development programs are intended to enable us to maintain technological leadership. Certain of the companies producing competing products or providing competing services are well established and may have greater financial resources.

Our principal competitors are companies that manufacture machines that make, or use machines to make, models, prototypes, molds and small-volume to medium-volume manufacturing parts. These include suppliers of CNC, suppliers of plastics molding equipment, including injection-molding equipment, suppliers of traditional machining, milling and grinding equipment, and businesses that use such equipment to produce models, prototypes, molds and small-volume to medium-volume manufacturing parts. These conventional machining, plastic molding and metal casting techniques continue to be the most common methods by which plastic and metal parts, models, functional prototypes and metal tool inserts are manufactured.

Our competitors also include other suppliers of stereolithography, laser sintering and other 3D printers and print materials as well as suppliers of alternative additive manufacturing solutions such as vacuum casting equipment. A number of companies currently sell print materials that compete with those we sell, and there are a wide number of suppliers of maintenance services for the equipment that we sell. Numerous suppliers of these products operate both internationally and regionally, and many of them have well-recognized product lines that compete with us in a wide range of our product applications.

Competition in the parts printing service business is highly fragmented, with most of the services suppliers operating on a local level.

We believe that our future success depends on our ability to enhance our existing products and services, introduce new products and services on a timely and cost-effective basis, meet changing customer needs, extend our core technologies to new applications and anticipate and respond to emerging standards, business models, service delivery methods and other technological changes.

Employees

At December 31, 2011, we had 714 full-time employees. Although some of our employees outside the U.S. are subject to local statutory employment and labor arrangements, none of our U.S. employees are covered by collective bargaining agreements. We have not experienced any material work stoppages and believe that our relations with our employees are satisfactory.

Available Information

Our website address is www.3DSystems.com. The information contained on our website is neither a part of, nor incorporated by reference into, this Form 10-K. We make available free of charge through our website our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, amendments to those reports, and other documents that we file with the Securities and Exchange Commission (“SEC”), as soon as reasonably practicable after we electronically file them with, or furnish them to, the SEC.

 

11


Table of Contents

Several of our corporate governance materials, including our Code of Conduct, Code of Ethics for Senior Financial Executives and Directors, Corporate Governance Guidelines, the current charters of each of the standing committees of the Board of Directors and our corporate charter documents and by-laws are available on our website.

Executive and Other Officers

The information appearing in the table below sets forth the current position or positions held by each of our officers and his or her age as of February 1, 2012. All of our officers serve at the pleasure of the Board of Directors. There are no family relationships among any of our officers or directors.

 

Name and Current Position

   Age as of
February 1, 2012
 

Abraham N. Reichental

  

President and Chief Executive Officer

     55   

Charles W. Hull

  

Executive Vice President, Chief Technology Officer

     72   

Robert M. Grace, Jr.

  

Vice President, General Counsel and Secretary

     64   

Damon J. Gregoire

  

Senior Vice President and Chief Financial Officer

     43   

Kevin P. McAlea

  

Vice President, Production Printer Solutions

     53   

Cathy L. Lewis

  

Vice President, Global Marketing

     60   

We have employed each of the individuals in the foregoing table other than Mr. Gregoire and Ms. Lewis for more than five years.

Mr. Gregoire joined us on April 25, 2007 as Vice President and Chief Financial Officer. Previously, he was employed by Infor Global Solutions, Inc., an international software company, as Vice President of Finance since 2006 with responsibility for its Datastream Systems and Customer Relationship Management division. Mr. Gregoire previously served as Corporate Controller of Datastream Systems Inc., a software company, from 2005 until it was acquired by Infor Global Solutions, Inc. in March 2006. For more than three years prior to 2005, Mr. Gregoire served as Director of Accounting and Financial Analysis of Paymentech, L.P., an international credit card processing company.

Ms. Lewis joined us as Vice President Global Marketing on October 15, 2009 and was elected an officer of the company in May 2010. Since 2006 she was Chief Executive Officer of Desktop Factory, Inc., a venture financed technology start-up focused on the development and delivery of a low cost 3D printer. For more than three years prior to 2006, Ms. Lewis served as Senior Vice President, Marketing for IKON Office Solutions, a global office copying/printing/imaging and related services company.

 

Item 1A. Risk Factors

Forward-Looking Statements

Certain statements made in this Form 10-K that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include the cautionary statements and risk factors set forth below as well as other statements made in this Form 10-K that may involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements.

 

12


Table of Contents

In addition to the statements set forth below that explicitly describe risks and uncertainties to which our business and our financial condition and results of operations are subject, readers are urged to consider statements in future or conditional tenses or that include terms such as “believes,” “belief,” “expects,” “intends,” “anticipates” or “plans” that appear in this Form 10-K to be uncertain and forward-looking. Forward-looking statements may include comments as to our beliefs and expectations as to future events and trends affecting our business. Forward-looking statements are based upon our beliefs, assumptions and current expectations concerning future events and trends, using information currently available to us, and are necessarily subject to uncertainties, many of which are outside our control. We assume no obligation, and do not intend, to update these forward-looking statements, except as required by applicable law. The factors stated under the heading “Cautionary Statements and Risk Factors” set forth below, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements.

If one or more of these or other risks or uncertainties materialize, or if our underlying assumptions prove to be incorrect, actual results may vary materially from those reflected in or suggested by forward-looking statements. Any forward-looking statement that you read in this Form 10-K reflects our current views with respect to future events and is subject to these and other risks, uncertainties and assumptions relating to our operations, results of operations, financial condition, growth strategy and liquidity. All subsequent written and oral forward-looking statements attributable to us or to individuals acting on our behalf are expressly qualified in their entirety by this discussion. You should specifically consider the factors identified in this Form 10-K, which would cause actual results to differ from those referred to in forward-looking statements.

Cautionary Statements and Risk Factors

The risks and uncertainties described below are not the only risks and uncertainties that we face. Additional risks and uncertainties not currently known to us or that we currently deem not to be material also may impair our business operations, results of operations and financial condition. If any of the risks described below or if any other risks and uncertainties not currently known to us or that we currently deem not to be material actually occurs, our business, results of operations and financial condition could be materially adversely affected. In that event, the trading price of our common stock could decline, and you could lose all or part of your investment in our common stock.

The risks discussed below also include forward-looking statements that are intended to provide our current expectations with regard to those risks. There can be no assurance that our current expectations will be met, and our actual results may differ substantially from the expectations expressed in these forward-looking statements.

Global economic, political and social conditions may harm our ability to do business, increase our costs and negatively affect our stock price.

We believe that we are emerging from a global recession in the United States, Europe and other regions of the world. The prospects for economic growth in the United States and other countries remain uncertain, and may cause customers to further delay or reduce technology purchases due to continued softness in the real estate and mortgage markets or other markets, volatility in fuel and other energy costs, difficulties in the financial services sector and credit markets, continuing geopolitical uncertainties and other macroeconomic factors affecting spending behavior. The global recession had an adverse impact on the sales of our products in 2009 leading to longer sales cycles, slower adoption of new technologies and increased price competition. Given the continued uncertainty concerning the pace of growth in the global economy, we face risks that may arise from financial difficulties experienced by our suppliers, resellers or customers, including:

 

   

The risk that customers or resellers to whom we sell our products and services may face financial difficulties or may become insolvent, which could lead to our inability to obtain payment of accounts receivable that those customers or resellers may owe;

 

   

The risk that key suppliers of raw materials, finished products or components used in the products that we sell may face financial difficulties or may become insolvent, which could lead to disruption in the supply of printers, print materials or spare parts to our customers; and

 

   

The inability of customers, including resellers, suppliers and contract manufacturers to obtain credit financing to finance purchases of our products and raw materials used to build those products.

 

13


Table of Contents

We may incur substantial costs enforcing or acquiring intellectual property rights and defending against third party claims as a result of litigation or other proceedings.

In connection with the enforcement of our own intellectual property rights, the acquisition of third-party intellectual property rights or disputes related to the validity or alleged infringement of third party intellectual property rights, including patent rights, we have been, are currently and may in the future be subject to claims, negotiations or complex, protracted litigation. Intellectual property disputes and litigation may be costly and can be disruptive to our business operations by diverting attention and energies of management and key technical personnel, and by increasing our costs of doing business. Although we have successfully defended or resolved past litigation and disputes, we may not prevail in any ongoing or future litigation and disputes.

Third party intellectual property claims asserted against us could subject us to significant liabilities, require us to enter into royalty and licensing arrangements on unfavorable terms, prevent us from assembling or licensing certain of our products, subject us to injunctions restricting our sale of products, cause severe disruptions to our operations or the marketplaces in which we compete, or require us to satisfy indemnification commitments with our customers including contractual provisions under various license arrangements. In addition we may incur significant costs in acquiring the necessary third-party intellectual property rights for use in our products. Any of these could seriously harm our business.

We may not be able to protect our intellectual property rights, including our digital content, from third-party infringers or unauthorized copying, use or disclosure.

Although we defend our intellectual property rights and endeavor to combat unlicensed copying and use of our digital content and intellectual property rights through a variety of techniques, preventing unauthorized use or infringement of our rights is inherently difficult. If our intellectual property becomes subject to piracy attacks, they may harm our business.

Additionally, we endeavor to protect the secrecy of our digital content, confidential information and trade secrets. If unauthorized disclosure of our trade secrets occurs, we could potentially lose trade secret protection. The loss of trade secret protection could make it easier for third parties to compete with our products by copying previously confidential features, which could adversely affect our revenue and operating margins. We also seek to protect our confidential information and trade secrets through the use of non-disclosure agreements. However there is a risk that our confidential information and trade secrets may be disclosed or published without our authorization, and in these situations it may be difficult and/or costly for us to enforce our rights.

We have made, and expect to continue to make, strategic acquisitions that may involve significant risks and uncertainties. We may not realize the anticipated benefits of past or future acquisitions and integration of these acquisitions may disrupt our business and divert management.

We completed twelve acquisitions in 2011, one of which was considered significant in accordance with the rules and regulations of the SEC. We also completed the Z Corp and Vidar acquisitions in 2012 and we intend to continue to evaluate acquisition opportunities in the future in an effort to expand our business and enhance stockholder value. Acquisitions involve certain risks and uncertainties including:

 

   

Difficulty in integrating newly acquired businesses and operations in an efficient and cost-effective manner, which may also impact our ability to realize the potential benefits associated with the acquisition;

 

   

The risk that significant unanticipated costs or other problems associated with integration may be encountered;

 

   

The challenges in achieving strategic objectives, cost savings and other anticipated benefits;

 

   

The risk that our marketplaces do not evolve as anticipated and that the technologies acquired do not prove to be those needed to be successful in the marketplaces that we serve;

 

   

The risk that we assume significant liabilities that exceed the limitations of any applicable indemnification provisions or the financial resources of any indemnifying party;

 

   

The inability to maintain a relationship with key customers, vendors and other business partners of the acquired business;

 

14


Table of Contents
   

The difficulty in maintaining controls, procedures and policies during the transition and integration;

 

   

The potential loss of key employees of the acquired businesses;

 

   

The risk of diverting management attention from our existing operations;

 

   

The potential failure of the due diligence process to identify significant problems, liabilities or other challenges of an acquired company or technology;

 

   

The risk of incurring significant exit costs if products or services are unsuccessful;

 

   

The entry into marketplaces where we have no or limited direct prior experience and where competitors have stronger marketplace positions;

 

   

The exposure to litigation or other claims in connection with our assuming claims or litigation risks from terminated employees, customers, former shareholders or other third parties; and

 

   

The risk that historical financial information may not be representative or indicative of our results as a combined company.

If we cease to generate net cash flow from operations and if we are unable to raise additional capital, our financial condition could be adversely affected.

In 2011, our unrestricted cash and short-term investments increased by $141.8 million to $179.1 million at December 31, 2011 from $37.3 million at December 31, 2010. The cash balance at December 31, 2011 included the $145.4 million net proceeds from senior convertible notes previously discussed, including the cash purchase price for the Z Corp and Vidar acquisitions that we paid on January 3, 2012.

During 2011, 2010 and 2009, net cash provided by operations was $27.7 million, $31.8 million and $7.7 million, respectively. We cannot assure you that we will continue to generate cash from operations or other potential sources to fund future working capital needs and meet capital expenditure requirements.

If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as selling assets, restructuring debt or obtaining additional equity capital on terms that may be onerous or highly dilutive. Our ability to refinance our indebtedness will depend on, among other things, the capital markets, our financial condition at such time and the terms and conditions of such indebtedness. We may not be able to engage in any of these activities or engage in these activities on desirable terms, which could result in a default on our debt obligations.

During 2011 we carried out two capital markets transactions and received $207.4 million of net proceeds from them. From time-to-time we may seek access to additional external sources of capital to fund working capital needs, capital expenditures, acquisitions and for other general corporate purposes. However, we cannot assure you that capital would be available from external sources such as bank credit facilities, debt or equity financings or other potential sources to fund any of those future needs.

The global financial crisis affecting the banking system and financial markets has resulted in a tightening of credit markets, lower levels of liquidity in many financial markets, and extreme volatility in fixed income, credit, currency and equity markets. As a consequence, credit markets tightened significantly such that the ability to raise new capital has become more challenging and more expensive. If our ability to generate cash flow from operations and our existing cash becomes inadequate to meet our needs, our options for addressing such capital constraints include, but are not limited to, (i) obtaining a revolving credit facility from bank lenders, (ii) accessing the public capital markets, or (iii) delaying certain of our existing development projects. If it became necessary to obtain additional debt financing it is likely that such alternatives in the current market environment would be on less favorable terms than we have historically obtained, which could have a material adverse impact on our consolidated financial position, results of operations or cash flows.

The lack of additional capital resulting from any inability to generate cash flow from operations or to raise equity or debt financing could force us to substantially curtail or cease operations and would, therefore, have a material adverse effect on our business and financial condition. Furthermore, we cannot assure you that any

 

15


Table of Contents

necessary funds, if available, would be available on attractive terms or that they would not have a significantly dilutive effect on our existing stockholders. If our financial condition worsens and we become unable to attract additional equity or debt financing or enter into other strategic transactions, we could become insolvent or be forced to declare bankruptcy.

The variety of products that we sell could cause significant quarterly fluctuations in our gross profit margins, and those fluctuations in margins could cause fluctuations in operating income or loss and net income or loss.

We continuously work to expand and improve our product offerings, including our printers, print materials and services, the number of geographic areas in which we operate and the distribution channels we use to reach various target product applications and customers. This variety of products, applications and channels involves a range of gross profit margins that can cause substantial quarterly fluctuations in gross profit and gross profit margin depending upon the mix of product shipments from quarter to quarter. We may experience significant quarterly fluctuations in gross profit margins or operating income or loss due to the impact of the mix of products, channels or geographic areas in which we sell our products from period to period. In some quarters, it is possible that results could be below expectations of analysts and investors. If so, the price of our common stock may be volatile or decline.

We believe that our future success may depend on our ability to deliver products that meet changing technology and customer needs.

Our business may be affected by rapid technological change, changes in user and customer requirements and preferences, frequent new product and service introductions embodying new technologies and the emergence of new standards and practices, any of which could render our existing products and proprietary technology and printers obsolete. Accordingly, our ongoing research and development programs are intended to enable us to maintain technological leadership. We believe that to remain competitive we must continually enhance and improve the functionality and features of our products, services and technologies. However, there is a risk that we may not be able to:

 

   

Develop or obtain leading technologies useful in our business;

 

   

Enhance our existing products;

 

   

Develop new products and technologies that address the increasingly sophisticated and varied needs of prospective customers, particularly in the area of print materials functionality;

 

   

Respond to technological advances and emerging industry standards and practices on a cost-effective and timely basis; or

 

   

Recruit or retain key technology employees.

We derive a significant portion of our revenue from business conducted outside the U.S and are subject to the risks of doing business outside the U.S.

Approximately 50 percent of our consolidated revenue is derived from customers in countries outside the U.S. There are many risks inherent in business activities outside the U.S. that, unless managed properly, may adversely affect our profitability, including our ability to collect amounts due from customers. While most of our operations outside the U.S. are conducted in highly developed countries, they could be adversely affected by:

 

   

Unexpected changes in laws, regulations and policies of non-U.S. governments relating to investments and operations, as well as U.S. laws affecting the activities of U.S. companies abroad;

 

   

Changes in regulatory requirements, including export controls, tariffs and embargoes, other trade restrictions, competition, corporate practices and data privacy concerns;

 

   

Political policies, political or civil unrest, terrorism or epidemics and other similar outbreaks;

 

16


Table of Contents
   

Fluctuations in currency exchange rates;

 

   

Seasonal reductions in business activity in certain parts of the world, particularly during the summer months in Europe and extended holiday periods in various parts of the world;

 

   

Limited protection for the enforcement of contract and intellectual property rights in some countries;

 

   

Transportation delays;

 

   

Difficulties in staffing and managing foreign operations;

 

   

Operating in countries with a higher incidence of corruption and fraudulent business practices;

 

   

Taxation; and

 

   

Other factors, depending upon the specific country in which we conduct business.

These uncertainties may make it difficult for us and our customers to accurately plan future business activities and may lead our customers in certain countries to delay purchases of our products and services. More generally, these geopolitical, social and economic conditions could result in increased volatility in global financial markets and economies.

The consequences of terrorism or armed conflicts are unpredictable, and we may not be able to foresee events that could have an adverse effect on our market opportunities or our business. We are uninsured for losses and interruptions caused by terrorism, acts of war and similar events.

While the geographic areas outside the U.S. in which we operate are generally not considered to be highly inflationary, our foreign operations are sensitive to fluctuations in currency exchange rates arising from, among other things, certain intercompany transactions that are generally denominated, for example, in U.S. dollars rather than their respective functional currencies.

Moreover, our operations are exposed to market risk from changes in interest rates and foreign currency exchange rates and commodity prices, which may adversely affect our results of operations and financial condition. We seek to minimize these risks through regular operating and financing activities and, when we consider it to be appropriate, through the use of derivative financial instruments. We do not purchase, hold or sell derivative financial instruments for trading or speculative purposes.

We face significant competition in many aspects of our business, which could cause our revenue and gross profit margins to decline. Competition could also cause us to reduce sales prices or to incur additional marketing or production costs, which could result in decreased revenue, increased costs and reduced margins.

We compete for customers with a wide variety of producers of equipment for models, prototypes, other three-dimensional objects and end-use parts as well as producers of print materials and services for this equipment. Some of our existing and potential competitors are researching, designing, developing and marketing other types of competitive equipment, print materials and services. Many of these competitors have financial, marketing, manufacturing, distribution and other resources substantially greater than ours.

We also expect that future competition may arise from the development of allied or related techniques for equipment and print materials that are not encompassed by our patents, from the issuance of patents to other companies that may inhibit our ability to develop certain products, and from improvements to existing print materials and equipment technologies.

We intend to continue to follow a strategy of continuing product development to enhance our position to the extent practicable. We cannot assure you that we will be able to maintain our current position in the field or continue to compete successfully against current and future sources of competition. If we do not keep pace with technological change and introduce new products, we may lose revenue and demand for our products.

 

17


Table of Contents

We depend on our supply chain for components and sub-assemblies used in our 3D printers and for raw materials used in our print materials. If these relationships were to terminate or be disrupted, our business could be disrupted while we locate alternative suppliers and our expenses may increase.

We have outsourced the assembly of certain of our printers to third party suppliers, we purchase components and sub-assemblies for our printers from third party suppliers, and we purchase raw materials that are used in our print materials, as well as certain of those print materials, from third party suppliers.

While there are several potential suppliers of the components, parts and sub-assemblies for our products, we currently choose to use only one or a limited number of suppliers for several of these components, including our lasers, print materials and certain jetting components. Our reliance on a single or limited number of suppliers involves many risks including:

 

   

Potential shortages of some key components;

 

   

Disruptions in the operations of these suppliers;

 

   

Product performance shortfalls; and

 

   

Reduced control over delivery schedules, assembly capabilities, quality and costs.

While we believe that we can obtain all the components necessary for our products from other manufacturers, we require any new supplier to become “qualified” pursuant to our internal procedures, which could involve evaluation processes of varying durations. We generally have our printers assembled based on our internal forecasts and the supply of raw materials, assemblies, components and finished goods from third parties, which are subject to various lead times. In addition, at any time, certain suppliers may decide to discontinue production of an assembly, component or raw material that we use. Any unanticipated change in the sources of our supplies, or unanticipated supply limitations, could increase production or related costs and consequently reduce margins.

If our forecasts exceed actual orders, we may hold large inventories of slow-moving or unusable parts, which could have an adverse effect on our cash flow, profitability and results of operations.

We have engaged selected design and manufacturing companies to assemble certain of our production printers. In carrying out these outsourcing activities, we face a number of risks, including:

 

   

The risk that the parties that we retain to perform assembly activities may not perform in a satisfactory manner;

 

   

The risk of disruption in the supply of printers to our customers if such third parties either fail to perform in a satisfactory manner or are unable to supply us with the quantity of printers that are needed to meet then current customer demand; and

 

   

The risk of insolvency of these suppliers, as well as the risk that we face, as discussed above, in dealing with a limited number of suppliers.

We face risks in connection with changes in energy-related expenses.

We and our suppliers depend on various energy products in processes used to produce our products. Generally, we acquire products at market prices and do not use financial instruments to hedge energy prices. As a result, we are exposed to market risks related to changes in energy prices. In addition, many of the customers and industries to whom we market our printers and print materials are directly or indirectly dependent upon the cost and availability of energy resources.

Our business and profitability may be materially and adversely affected to the extent that our or our customers’ energy-related expenses increase, both as a result of higher costs of producing, and potentially lower profit margins in selling, our products and print materials and because increased energy costs may cause our customers to delay or reduce purchases of our printers and print materials.

 

18


Table of Contents

We may be subject to product liability claims, which could result in material expense, diversion of management time and attention and damage to our business reputation.

Products as complex as those we offer may contain undetected defects or errors when first introduced or as enhancements are released that, despite testing, are not discovered until after the product has been installed and used by customers. This could result in delayed marketplace acceptance of the product, claims from customers or others, damage to our reputation and business or significant costs to correct the defect or error.

We attempt to include provisions in our agreements with customers that are designed to limit our exposure to potential liability for damages arising from defects or errors in our products. However, the nature and extent of these limitations vary from customer to customer, their effect is subject to a variety of legal limitations, and it is possible that these limitations may not be effective as a result of unfavorable judicial decisions or laws enacted in the future.

The sale and support of our products entails the risk of product liability claims. Any product liability claim brought against us, regardless of its merit, could result in material expense, diversion of management time and attention, damage to our business reputation and cause us to fail to retain existing customers or to fail to attract new customers.

Historically, our common stock price has been volatile.

The market price of our common stock has experienced, and may continue to experience, considerable volatility. Between January 1, 2010 and December 31, 2011, after giving effect to the two-for-one stock split in the nature of a 100% stock dividend that we distributed in May 2011, the trading price of our common stock has ranged from a low of $5.25 per share to a high of $29.35 per share.

Numerous factors could have a significant effect on the price of our common stock, including those described or referred to in this “Risk Factors” section of this Form 10-K, as well as, among other things:

 

   

Our perceived value in the securities markets;

 

   

Overall trends in the stock market;

 

   

Announcements of fluctuations in our operating results or the operating results of one or more of our competitors;

 

   

The impact of changes in our results of operations, our financial condition or our prospects on how we are perceived in the securities markets;

 

   

Future sales of our common stock or other securities (including any shares issued in connection with our outstanding senior convertible notes or earn-out obligations for any past or future acquisition);

 

   

Market conditions for providers of products and services such as ours;

 

   

Changes in recommendations or earnings estimates by securities analysts; and

 

   

Announcements of acquisitions by us or one of our competitors.

The number of shares of common stock issuable in a stock offering, the exercise of outstanding stock options, the issuance of restricted stock awards or the issuance of shares in connection with certain acquisitions or the conversion of the notes could dilute the ownership interest of existing stockholders and may affect the market price for our common stock.

We have an effective registration statement on Form S-3 under which, among other things, we may issue up to $175 million of securities. We issued $65.8 million of Common Stock in 2011 in reliance upon this registration statement and the remaining $109.2 million of securities covered by it may be issued until March 3, 2014, although we have no current intention to do so.

Our Certificate of Incorporation, as amended, authorizes our issuance of up to a total 120 million shares of common stock, of which 63.3 million have been issued or are otherwise currently reserved for issuance. Future issuances could have the effect of diluting our earnings per share as well as our existing stockholders’ individual ownership percentages and could lead to volatility in our common stock price.

 

19


Table of Contents

Additionally, subject to the limitations of our Certificate of Incorporation and applicable law, we are not restricted from issuing additional common stock, including securities that are convertible into or exchangeable for, or that represent the right to receive, common stock. The issuance of additional shares of our common stock in connection with future acquisitions or other issuances of our common stock or convertible securities, including outstanding options, may dilute the ownership interest of our common stockholders.

Sales of a substantial number of shares of our common stock or other equity-related securities in the public market could depress the market price of our common stock and impair our ability to raise capital through the sale of additional equity or equity-linked securities. We cannot predict the effect that future sales of our common stock or other equity-related securities would have on the market price of our common stock.

In addition, approximately 1.1 million shares of common stock were issuable upon the exercise of outstanding stock options at December 31, 2011, all of which were fully vested and remained exercisable at that date.

Our Board of Directors is authorized to issue up to 5 million shares of preferred stock.

The Board of Directors is authorized to issue up to 5 million shares of preferred stock, none of which is currently issued or outstanding. The Board of Directors is authorized to issue these shares of preferred stock in one or more classes or series without further action of the stockholders and in that regard to determine the issue price, rights, preferences and privileges of any such class or series of preferred stock generally without any further vote or action by the stockholders. The rights of the holders of any outstanding series of preferred stock may adversely affect the rights of holders of common stock.

Our ability to issue preferred stock gives us flexibility concerning possible acquisitions and financings, but it could make it more difficult for a third party to acquire a majority of our outstanding common stock. In addition, any preferred stock that is issued may have other rights, including dividend rights, liquidation preferences and other economic rights, senior to the common stock, which could have a material adverse effect on the market value of our common stock.

Certain provisions of Delaware law contain anti-takeover provisions that may make it more difficult to effect a change in our control.

Certain provisions of the Delaware General Corporation Law could delay or prevent an acquisition or change in control and the replacement of our incumbent directors and management, even if doing so might be beneficial to our stockholders by providing them with the opportunity to sell their shares, possibly at a premium over the then market price of our common stock. One of these Delaware laws prohibits us from engaging in a business combination with any interested stockholder (as defined in the statute) for a period of three years from the date that the person became an interested stockholder, unless certain conditions are met.

Certain provisions of our outstanding convertible notes could discourage an acquisition of us by a third party.

Certain provisions of the notes could make it more difficult or more expensive for a third party to acquire us or to carry out any other transaction that may effect a change in our control. Upon the occurrence of certain transactions constituting a fundamental change (as such term is defined in the indenture covering such notes), holders of the notes will have the right, at their option, to require us to repurchase all of the notes they hold or any portion of the principal amount of such notes in integral multiples of $1,000. We may also be required to issue additional shares of common stock upon conversion of such notes.

Our balance sheet contains several categories of intangible assets totaling $161.7 million at December 31, 2011 that we could be required to write off or write down in the event of the impairment of certain of those assets arising from any deterioration in our future performance or other circumstances. Such write-offs or write-downs could adversely impact our future earnings and stock price, our ability to obtain financing and affect our customer relationships.

At December 31, 2011, we had $107.7 million in goodwill capitalized on our balance sheet. Accounting Standards Codification (“ASC”) 350, “Intangibles — Goodwill and Other,” requires that goodwill and some

 

20


Table of Contents

long-lived intangibles be tested for impairment at least annually. In addition, goodwill and intangible assets are tested for impairment at other times as circumstances warrant, and such testing could result in write-downs of some of our goodwill and long-lived intangibles. Impairment is measured as the excess of the carrying value of the goodwill or intangible asset over the fair value of the underlying asset. A key factor in determining whether impairment has occurred is the relationship between our market capitalization and our book value. Accordingly, we may, from time to time, incur impairment charges, which are recorded as operating expenses when they are incurred and would reduce our net income and adversely affect our operating results in the period in which they are incurred.

As of December 31, 2011, we had $54.0 million of other intangible assets, net, consisting of licenses, patents, and other intangibles that we amortize over time. Any material impairment to any of these items would result in a non-cash charge and would not impact our cash position or cash flows, but such a charge could adversely affect our results of operations and equity and could affect the trading price of our common stock in the period in which they are incurred.

As discussed below, we completed several business acquisitions during 2009, 2010 and 2011. The majority of the acquisitions have resulted in our recording additional goodwill on our consolidated balance sheet. This goodwill typically arises because the purchase price for these businesses reflects a number of factors including the future earnings and cash flow potential of these businesses; the multiples to earnings, cash flow and other factors, such as prices at which similar businesses have been purchased by other acquirers; the competitive nature of the process by which we acquired the business; and the complementary strategic fit and resulting synergies these businesses bring to existing operations.

We expect to record additional goodwill as a result of the Z Corp and Vidar acquisitions, but we have not determined the amount thereof at the date of this Form 10-K.

For additional information, see Notes 6 and 7 to the Consolidated Financial Statements and “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Critical Accounting Policies and Significant Estimates — Goodwill and other intangible and long-lived assets.”

Changes in, or interpretation of, tax rules and regulations may impact our effective tax rate and future profitability.

We are a U.S. based, multinational company subject to taxation in multiple U.S. and foreign tax jurisdictions. Our future effective tax rates could be adversely affected by changes in statutory tax rates, or interpretation of, tax rules and regulations in jurisdictions in which we do business, changes in the amount of revenue or earnings in the countries with varying statutory tax rates, or by changes in the valuation of deferred tax assets and liabilities.

In addition, we are subject to audits and examinations of previously filed income tax returns by the Internal Revenue Service (“IRS”), and other domestic and foreign tax authorities. We regularly assess the potential impact of such examinations to determine the adequacy of our provision for income taxes and have reserved for potential adjustments that we expect may result from the current examinations. We believe such estimates to be reasonable; however, there is no assurance that the final determination of any examination will not have an adverse effect on our operating results and financial position.

 

Item 1B. Unresolved Staff Comments

None.

 

Item 2. Properties

We occupy an 80,000 square foot headquarters and research and development facility in Rock Hill, South Carolina, which we lease pursuant to a lease agreement with Lex Rock Hill, LP. After its initial term ending August 31, 2021, the lease provides us with the option to renew the lease for two additional five-year terms as well as the right to cause Lex Rock Hill, LP, subject to certain terms and conditions, to expand the leased premises during the term of the lease, in which case the term of the lease would be extended. The lease is a triple net lease and provides for the payment of base rent of approximately $0.7 million annually from 2012 through

 

21


Table of Contents

2020, including a rent escalation in 2016, and $0.8 million in 2021. Under the terms of the lease, we are obligated to pay all taxes, insurance, utilities and other operating costs with respect to the leased premises. The lease also grants us the right to purchase the leased premises and undeveloped land surrounding the leased premises on terms and conditions described more particularly in the lease. We exercised the right to purchase the undeveloped land in March 2011. We purchased this 11-acre parcel contiguous to our Rock Hill facility for future expansion and additional facility capacity to continue to expand in-house manufacturing activities for printers and print materials.

We own 35,000 square feet of office and printed parts service facilities in Lawrenceburg, Tennessee at which we perform a broad range of printed parts services.

We lease 30,000 square feet of office and printed parts service facilities in Seattle, Washington, which we utilize in our on-demand custom parts services. We lease approximately 22,000 square feet of office and printed parts service facilities in Pinerolo, Italy, which is used in our on-demand custom parts services and as a sales and service office. We lease an approximately 17,000 square foot office facility in Atlanta, GA, which is used in our on-demand parts services. We lease an 11,000 square foot advanced research and development facility in Valencia, California. We also lease a 13,000 square foot general-purpose facility in Marly, Switzerland at which we blend print materials and composites. We lease a 14,000 square foot facility in Richardson, TX, which is used in our consumer solutions services and software products. We lease office and printed parts service facilities of approximately 21,000 square feet in Le Mans, France, which is used in our on-demand custom parts services and as a sales and service office. We also lease various sales and service offices in Germany, the United Kingdom, the Netherlands, Australia, Japan, China and India as well as various other facilities used in our on-demand custom parts services in the U.S., Australia and the Netherlands.

 

Item 3. Legal Proceedings.

In 2008, DSM Desotech Inc. filed a complaint, which it has subsequently amended, in an action titled DSM Desotech Inc. v. 3D Systems Corporation and 3D Systems, Inc. in the United States District Court for the Northern District of Illinois (Eastern Division) asserting that we engaged in anticompetitive behavior with respect to resins used in certain of our stereolithography machines. The complaint further asserted that we are infringing upon two of DSM Desotech’s patents relating to stereolithography machines.

We filed answers to DSM Desotech’s complaint in which, among other things, we denied the material allegations of its complaint. In 2010, the Court issued a decision relating to the construction of the claims of the patents-in-suit following a Markman hearing held in 2009. In that decision, the Court generally adopted the claim constructions that we proposed.

Fact discovery, including expert discovery, regarding the claims pending in this case concluded in 2011. We filed motions for summary judgment in December 2011 that seek rulings in our favor on all of DSM Desotech’s claims in the litigation. As of the date of this Form 10-K, the Court has not yet ruled on those motions.

We understand that DSM Desotech estimates the damages associated with its claims to be in excess of $40 million. We intend to continue to vigorously contest all the claims asserted by DSM Desotech.

We have been pursuing patent infringement litigation against EnvisionTEC, Inc. and certain of its related companies since 2005. In this litigation, we asserted that EnvisionTEC infringed our patents covering various three-dimensional solid imaging products and methods for creating physical three-dimensional models of an object and have sought injunctive relief and damages. EnvisionTEC’s Perfactory machine and Vanquish machine (the Vanquish is now marketed as the PerfactoryXede and PerfactoryXtreme) are the two products accused of patent infringement.

In 2008 the Court issued Markman claim constructions that generally adopted the claim constructions we proposed. Following a subsequent jury trial and certain other proceedings, the Court issued a judgment, as amended through 2011, to the effect that EnvisionTEC’s Perfactory and Vanquish machines infringe certain claims of one of our patents and its Vanquish machines infringe certain claims of another of our patents.

On October 13, 2011, EnvisionTEC’s motion to stay damages discovery was denied by the Court, and damages discovery is underway. We intend to pursue claims for damages against EnvisionTEC.

 

22


Table of Contents

On October 17, 2011, EnvisionTEC filed a Notice of Appeal with the United States Court of Appeals for the Federal Circuit seeking judicial review of the Court’s judgment, and we filed a motion to dismiss that appeal on December 12, 2011. As of the date of this Form 10-K, the Court of Appeals has not yet ruled.

In 2010, MSK K.K., a Japanese company, filed a complaint against our Japanese subsidiary in the Tokyo District Court asserting, among other things, various contract claims associated with two laser sintering machines purchased from us in 2007.

The plaintiff is seeking damages in excess of the Japanese Yen equivalent of $2.1 million. Several hearings have been held in the Tokyo District Court with respect to these claims. We are vigorously contesting all of the claims asserted by MSK K.K.

We are also involved in various other legal matters incidental to our business. We believe, after consulting with counsel, that the disposition of these other legal matters will not have a material effect on our consolidated results of operations or consolidated financial position.

 

Item 4. Mine Safety Disclosures

Not applicable.

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters, Issuance of Unregistered Securities and Issuer Purchases of Equity Securities

On May 26, 2011, we transferred the listing of our Common Stock to the New York Stock Exchange (“NYSE”) under the trading symbol “DDD.” Prior to that, our Common Stock was listed on The NASDAQ Global Market (“NASDAQ”) and traded under the symbol “TDSC.” The following table sets forth, for the periods indicated, the range of high and low prices of our common stock, $0.001 par value, as quoted on The NASDAQ Global Market and the NYSE, with tickers TDSC and DDD, respectively. In addition, we completed a two-for-one split in the form of a 100% stock dividend effective May 18, 2011, which is reflected in the prices in the table below.

 

Year

 

Period

   High      Low  

2010

     

First Quarter

   $ 7.78       $ 5.25   

Second Quarter

   $ 8.35       $ 5.81   

Third Quarter

   $ 8.18       $ 5.55   

Fourth Quarter

   $ 17.15       $ 7.49   

2011

     

First Quarter

   $ 26.78       $ 13.38   

Second Quarter

   $ 29.35       $ 17.01   

Third Quarter

   $ 27.28       $ 13.67   

Fourth Quarter

   $ 20.00       $ 12.78   

As of February 16, 2012, our outstanding common stock was held by approximately 448 stockholders.

Dividends

We do not currently pay, and have not paid, any dividends on our common stock, and we currently intend to retain any future earnings for use in our business. Any future determination as to the declaration of dividends on our common stock will be made at the discretion of the Board of Directors and will depend on our earnings, operating and financial condition, capital requirements and other factors deemed relevant by the Board of Directors, including the applicable requirements of the Delaware General Corporation Law, which provides that dividends are payable only out of surplus or current net profits.

 

23


Table of Contents

The payment of dividends on our common stock may be restricted by the provisions of credit agreements or other financing documents that we may enter into or the terms of securities that we may issue from time to time. Currently, no such agreements or documents limit our declaration of dividends or payments of dividends.

Issuance of Unregistered Securities and Issuer Purchases of Equity Securities

As discussed above, during the fourth quarter of 2011, we issued $152 million aggregate principal amount of 5.50% Senior Convertible Notes due 2016 in a transaction exempt from registration under the Securities Act of 1933, as amended. The notes were offered and sold only to persons who are both institutional accredited investors (within the meaning of Rule 501 of Regulation D under the Securities Act) and qualified institutional buyers (as defined in Rule 144A under the Securities Act) in reliance on a private placement exemption from registration under the Securities Act.

We did not repurchase any of our equity securities during the fourth quarter of 2011, except for unvested restricted stock awards repurchased pursuant to our 2004 Incentive Stock Plan. See Note 14 to the Consolidated Financial Statements.

 

24


Table of Contents

Stock Performance Graph

The graph below shows, for the five years ended December 31, 2011, the cumulative total return on an investment of $100 assumed to have been made on December 31, 2006 in our common stock. For purposes of the graph, cumulative total return assumes the reinvestment of all dividends. The graph compares such return with those of comparable investments assumed to have been made on the same date in (a) the NYSE Composite Index (b) the NASDAQ Composite — Total Returns Index and (c) the S&P 500 Information Technology Index, which are published market indices with which we are sometimes compared.

Although total return for the assumed investment assumes the reinvestment of all dividends on December 31 of the year in which such dividends were paid, we paid no cash dividends on our common stock during the periods presented.

Our common stock is listed on the NYSE (trading symbol: DDD). In May 2011 we transferred the listing of our Common Stock from the NASDAQ where we traded under the symbol “TDSC” to the NYSE under the trading symbol “DDD.” Consequently, we have added the NYSE Composite Index to the performance graph below.

COMPARISON OF 5-YEAR CUMULATIVE TOTAL RETURN*

Assumes Initial Investment of $100

December 2011

 

LOGO

 

* $100 invested on 12/31/06 in stock or index, including reinvestment of dividends. Fiscal year ending December 31.

 

     12/06     12/07     12/08     12/09     12/10     12/11  

3D Systems Corporation

  $ 100.00      $ 96.75      $ 49.75      $ 70.81      $ 197.32      $ 180.41   

NYSE Composite Index

    100.00        120.20        71.61        96.97        121.78        129.42   

NASDAQ Composite — Total Returns Index

    100.00        110.65        66.42        96.54        114.07        113.17   

S&P 500 Information Technology Index

    100.00        116.30        66.12        106.95        112.04        114.74   

 

25


Table of Contents
Item 6. Selected Financial Data

The selected consolidated financial data set forth below for the five years ended December 31, 2011 has been derived from our historical Consolidated Financial Statements. You should read this information together with Management’s Discussion and Analysis of Financial Condition and Results of Operations, the notes to the selected consolidated financial data, and our Consolidated Financial Statements and the notes thereto for December 31, 2011 and prior years included in this Form 10-K.

 

     Year ended December 31,  
     2011      2010      2009      2008     2007  
     (in thousands, except per share amounts)  

Consolidated Statement of Operations and Comprehensive Income (Loss) Data:

             

Consolidated Revenue:

             

Printers and other products

   $ 66,665       $ 54,686       $ 30,501       $ 41,323      $ 58,178   

Materials

     70,641         58,431         50,297         62,290        61,969   

Services

     93,117         46,751         32,037         35,327        36,369   
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

 

Total

     230,423         159,868         112,835         138,940        156,516   
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

 

Gross profit(1)

     109,028         73,976         49,730         55,568        63,412   

Income (loss) from operations(1)

     34,902         20,920         3,073         (5,490     (5,117

Net income (loss)(2)(3)

     35,420         19,566         1,139         (6,154     (6,740

Net income (loss) available to common stockholders

     35,420         19,566         1,066         (6,154     (6,740

Net income (loss) available to common stockholders per share:

             

Basic

   $ 0.71       $ 0.43       $ 0.03       $ (0.14   $ (0.17

Diluted

   $ 0.70       $ 0.42       $ 0.03       $ (0.14   $ (0.17

Consolidated Balance Sheet Data:

             

Working capital

   $ 202,357       $ 42,475       $ 36,718       $ 35,279      $ 40,906   

Total assets

     462,974         208,800         150,403         153,002        167,385   

Current portion of long-term debt and capitalized lease obligations

     163         224         213         3,280        3,506   

Long-term debt and capitalized lease obligations, less current portion

     7,609         8,055         8,254         8,467        8,663   

Total stockholders’ equity

     254,788         133,119         104,697         102,234        104,769   

Other Data:

             

Depreciation and amortization

   $ 11,502       $ 7,520       $ 5,886       $ 6,676      $ 6,970   

Interest expense

     2,090         587         618         918        1,830   

Capital expenditures(4)

     2,870         1,283         974         5,811        946   

 

 

(1) To conform to 2011, 2010 and 2009 presentation, foreign exchange gain (loss) was reclassified for 2008 and prior years from product cost of sales to interest and other expenses, net. The amount of foreign exchange gain that was reclassified for each year is as follows: $401 in 2008 and $48 in 2007. This had the effect of decreasing gross profit and increasing the loss from operations in 2008 and 2007 by the respective amounts.

 

(2) In 2011 and 2010, based upon our recent results of operations and expectation of continued profitability in future years, we concluded that it is more likely than not that a portion of our net U.S. deferred tax assets would be realized. In accordance with ASC 740, in 2011 and 2010 we reversed $17,000 and $3,000, respectively, of the valuation allowance applied to such deferred tax assets, resulting in a non-cash income tax benefit of $6,221 and $1,162, respectively.

 

26


Table of Contents
(3) Our net loss for 2008 included a $1,185 tax benefit arising from the settlement of a tax audit for the years 2000 through 2005 with a foreign tax authority. This tax settlement reduced 2008 income tax expense by $1,185 as amounts owing under the settlement were less than amounts previously estimated. The settlement enabled us to recognize foreign tax loss carryforwards, resulting in a $911 increase in our foreign deferred tax asset.

 

(4) Excludes capital lease additions.

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion and analysis should be read together with the selected consolidated financial data and our Consolidated Financial Statements and notes thereto set forth in this Form 10-K. Certain statements contained in this discussion may constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These statements involve a number of risks, uncertainties and other factors that could cause actual results to differ materially from those reflected in any forward-looking statements, as discussed more fully in this Form 10-K. See “Forward-Looking Statements” and “Cautionary Statements and Risk Factors” in Item 1A.

The forward-looking information set forth in this Form 10-K is provided as of the date of this filing, and, except as required by law, we undertake no duty to update that information.

Overview

We are a leading global provider of 3D content-to-print solutions including 3D printers, print materials and on-demand custom parts services. We also provide creative content development, design productivity tools and curation services and downloads. Our integrated solutions replace, displace and complement traditional methods and reduce the time and cost of designed new products by printing real parts directly from digital data. These solutions are used to rapidly design, communicate, prototype and produce functional parts, empowering our customers to create with confidence. We derive our consolidated revenue primarily from the sale of our printers, the related print materials and services, including revenue from our on demand parts services.

Growth strategy

We are pursuing a growth strategy that focuses on four strategic initiatives:

 

   

Build our global custom parts services;

 

   

Accelerate 3D printer penetration;

 

   

Grow healthcare solutions revenue; and

 

   

Build 3D consumer content products and services.

We are working to accomplish our growth initiatives organically and, as opportunities present themselves, through selective acquisitions, including those we have already completed. We expect to be able to support organic growth by leveraging our comprehensive toolkit of solutions in order to sell more products and services to our existing customer base. As with any growth strategy, there can be no assurance that we will succeed in accomplishing our strategic initiatives.

Build Global Custom Parts Services.    As a supplement to our 3D print solutions, we believe that growing and expanding our custom parts services, through organic growth and acquisitions, will enable us to impart the latest technology to our customers months or years in advance of their ability to invest in new printers for their own use. We view this as an opportunity to introduce customers to the newest 3D additive production technologies and to build brand experience and customer loyalty with them. We also view it as a significant cross-selling and upselling opportunity from single parts all the way to production printers. In connection with this initiative, we launched our on-demand parts services in October 2009, earned $18.3 million of revenue related to our on-demand parts service in 2010 and built this service to $58.8 million of revenue in 2011.

Accelerate 3D Printer Penetration.    We believe that accelerating 3D printer penetration through channel expansion and new products will provide a growing installed base to enable higher revenue from recurring sales of print materials and services. With this objective in mind, we have developed an extensive portfolio of 3D

 

27


Table of Contents

printers. We are continuing to expand our reseller channel for our personal and professional 3D printers and to train our resellers to perform installation and service for those printers. We exited 2011 with 167 resellers and $30.1 million of revenue from personal and professional printers, representing 35.9% growth over 2010 and $35.7 million of revenue from production printers, representing 10.1% growth over 2010. We expect additional growth from personal and professional printers as a result of our acquisition of Z Corp in January 2012.

Grow Healthcare Solutions Revenue.    We believe that, by leveraging our rapid manufacturing core competencies in healthcare solutions applications, we can grow revenue within this marketplace. For example, in 2011 healthcare solutions revenue, including sales of printers, print materials and services for hearing aid, dental, medical device and other health-related applications, accounted for 12.1%, or $27.9 million, of total revenue in 2011 and 13.5%, or $21.6 million, of our total revenue in 2010.

Build 3D Consumer Content Products and Services.    We believe that the affordability of our personal printers makes 3D consumer content critical to accelerated adoption. Recognizing the opportunity to deliver 3D content to an expanded audience, we have begun work to identify the tools and services required to deliver 3D content to consumers. We believe that the creation of content products and services could make affordable 3D printers more widely adopted and used by people of all ages and walks of life. We expect to build this capability through a combination of internal developments and acquisitions. Consumer products and services revenue was not material to our 2011 financial results.

We intend to accomplish growth in all areas of our growth strategy organically and, as opportunities present themselves, through selective acquisitions. As with any growth strategy, there can be no assurance that we will succeed in accomplishing our strategic initiatives.

Summary of 2011 Financial Results

As discussed in greater detail below, revenue for 2011 increased primarily due to higher sales across all revenue categories. Our revenue increased by 44.1% to $230.4 million in 2011 from $159.9 million in 2010, after having increased from $112.8 million in 2009. These results reflected growth in demand for 3D printers, increased demand in several key industries we serve, increased print material sales from a growing installed base, and higher service revenue from on-demand parts services and growth from acquisitions.

For 2011, healthcare solutions revenue accounted for $27.9 million, or 12.1%, of our total revenue and included sales of printers, print materials and services for hearing aid, dental, medical device and other health-related applications, compared to $21.6 million, or 13.5%, in 2010, the year we announced our growth initiative related to healthcare solutions.

Our gross profit for 2011 increased by 47.4% to $109.0 million from $74.0 million in 2010, after increasing from $49.7 million in 2009. Our higher gross profit for 2011 arose primarily from an increase in sales. Our gross profit margin percentage improved to 47.3% in 2011 from 46.3% in 2010 and 44.1% in 2009. Gross profit margin benefited from higher overhead absorption, higher print materials gross profit margin due to a shift in the mix of materials with increased personal and professional print materials revenue and the elimination of costs associated with product introduction of our V-Flash® personal printer, partially offset by increased sales of lower margin on-demand custom parts services and higher units of lower priced personal and professional 3D printers that accounted for a higher percentage of total sales.

Our total operating expenses increased by $21.1 million in 2011 from 2010, reflecting higher SG&A expense, primarily due to acquisition and severance expenses, higher commissions and staffing from our acquisitions and increased legal expenses associated with ongoing litigation and acquisitions. We expect to continue to manage expenses and drive down our costs where possible without impairing our ability to operate and service our customers.

For 2011, our operating income improved by $14.0 million to $34.9 million compared to operating income of $20.9 million in 2010 and $3.1 million in 2009. This was primarily due to higher revenue and the increase in our gross profit noted above, partially offset by higher operating expenses, including increased acquisitions expenses incurred during the fourth quarter in the amount of $2.5 million.

Our operating income for 2011 included $11.0 million of non-cash expenses, which primarily consisted of depreciation and amortization, stock-based compensation and non-cash interest expense, compared to $7.9 million of non-cash expenses in 2010 which consisted of depreciation and amortization and stock-based

 

28


Table of Contents

compensation. The increase in non-cash expenses is primarily due to amortization from acquired intangibles, as well as an increase in stock-based compensation and non-cash interest expense related to our convertible notes issued in November 2011.

A number of actions or events occurred in 2011 that affected our liquidity and our balance sheet including the following:

 

   

Our unrestricted cash and cash equivalents increased by $141.8 million to $179.1 million at December 31, 2011 from $37.3 million at December 31, 2010. Our cash increase included $62.1 million of net proceeds from a public equity offering carried out in early 2011 and $145.4 million of net proceeds from the issuance of senior convertible notes in November 2011 discussed above. In January 2012, $135.5 million of the net proceeds of the notes was used to complete the acquisition of Z Corp and Vidar. See “Liquidity and Capital Resources” below.

 

   

During 2011, we used $92.7 million of cash to acquire twelve businesses, including deferred purchase payments from prior acquisitions, to augment our printers business, on-demand parts services and consumer solutions initiative. See “Liquidity and Capital Resources — Cash Flow-Cash flow from investing activities.

 

   

Our working capital increased by $159.9 million from $42.5 million at December 31, 2010 to $202.4 million at December 31, 2011, which included the cash for the Z Corp and Vidar acquisition from the senior convertible notes as discussed above. See “Liquidity and Capital Resources — Working capital” below.

 

   

Among major components of working capital, accounts receivable, net of allowances, increased by $15.4 million from December 31, 2010 to December 31, 2011 primarily reflecting higher revenue and increased revenue from all revenue categories sold on credit terms. Inventory at December 31, 2011 was $1.5 million higher than its December 31, 2010 level, primarily reflecting timing of orders and delivery of finished goods print materials and raw materials, which are ordered in large quantities. Accounts payable decreased $0.6 million primarily reflecting timing of orders and payments to vendors associated with inventory and printer assembly.

Results of Operations for 2011, 2010 and 2009

Table 1 below sets forth revenue and percentage of revenue by class of product and service.

Table 1

 

     2011     2010     2009  
(dollars in thousands)       

Printers and other products

   $ 66,665         28.9   $ 54,686         34.2   $ 30,501         27.0

Materials

     70,641         30.7        58,431         36.6        50,297         44.6   

Services

     93,117         40.4        46,751         29.2        32,037         28.4   
  

 

 

    

 

 

   

 

 

    

 

 

   

 

 

    

 

 

 

Totals

   $ 230,423         100.0   $ 159,868         100.0   $ 112,835         100.0
  

 

 

    

 

 

   

 

 

    

 

 

   

 

 

    

 

 

 

Consolidated revenue

Consolidated revenue increased in 2011 due primarily to increased sales of print materials and on-demand custom parts service revenue from acquired and organic growth coupled with a 242% increase in printer unit sales over 2010. Revenue increased in 2010 due to increased volume across all sales categories primarily from increased demand from printers and on-demand custom parts services. These changes are explained in greater detail in the Revenue by class of product and service and Revenue by geographic region sections below.

Due to the relatively high list price of certain production and professional printers, our customers’ purchasing decisions may have long lead times; combined with the overall low unit volume of production printers sales in any particular period, the acceleration or delay of orders and shipments of a small number of printers from one

 

29


Table of Contents

period to another can significantly affect revenue reported for our production printers for the period involved. Revenue reported for printer sales in any particular period is also affected by revenue recognition rules prescribed by generally accepted accounting principles.

At December 31, 2011 our backlog was approximately $8.3 million, compared to $7.6 million at December 31, 2010 and $1.4 million at December 31, 2009. Due to timing of customer requested deliveries, the backlog at December 31, 2011 includes orders for production printers that amount to $1.0 million and three print materials orders that amount to $1.2 million. The December 2010 backlog included two large print materials orders placed at the end of 2010 for delivery in 2011 that amounted to $0.8 million. Additionally, on-demand parts services lead time and backlog depends on whether on-demand parts orders are for rapid prototyping or longer-range production runs. The backlog at December 31, 2011 includes $4.8 million of on-demand parts orders, compared to $1.9 million at December 31, 2010.

Revenue by class of product and service

2011 compared to 2010

Sales volumes of new products and services increased by $19.2 million in 2011, while the volume of core products and services sold increased by $49.4 million compared to 2010. Table 2 sets forth the change in revenue by class of product and service for 2011 compared to 2010.

Table 2

 

(dollars in thousands)    Printers and  Other
Products
    Materials     Services     Totals  

2010 Revenue

     $ 54,686          34.2   $ 58,431         36.6   $ 46,751         29.2   $ 159,868        100
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

    

 

 

   

 

 

   

 

 

 

Change in revenue:

                  

Volume:

                  

Core products and services

     689        1.3        5,771         9.9        43,052         92.1        49,512        31.0   

New products and services

     13,660        25.0        3,708         6.3        1,856         4.0        19,224        12.0   

Price/Mix

     (3,504     (6.4     724         1.2                       (2,780     (1.7

Foreign currency translation

     1,134        2.1        2,007         3.4        1,458         3.1        4,599        3.0   
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

    

 

 

   

 

 

   

 

 

 

Net change

     11,979        21.9        12,210         20.9        46,366         99.2        70,555        44.1   
  

 

 

     

 

 

      

 

 

      

 

 

   

2011 Revenue

   $ 66,665        28.9   $ 70,641         30.7   $ 93,117         40.4   $ 230,423        100
  

 

 

     

 

 

      

 

 

      

 

 

   

We earn revenue from the sales of printers and other products, print materials and services. On a consolidated basis, revenue for 2011 increased by 44.1% to $230.4 million from $159.9 million for 2010 as a result of higher units volume of lower priced personal, professional and production printers and other products and increased demand for materials sales and on-demand parts services.

The increase in revenue from printers and other products for 2011 compared to 2010 was primarily the result of higher sales of personal and professional printers.

Production printers, made up $35.7 million, or 54.3%, of total printers revenue for 2011, compared to $32.4 million, or 59%, in 2010. This represented a 10% increase in production printer revenue over 2010.

Personal and professional printers, made up $30.1 million, or 45.7%, increasing from $22.3 million, or 41%, in 2010. This represented a 35% increase in personal and professional printers over 2010.

Revenue from print materials was aided by the improvement in production printer sales, which are typically accompanied by significant initial materials purchases to charge up new printers and commence production, by the continued expansion of printers installed over the past periods and by increased materials sales from the acquisition of the RenShape® print materials. We acquired the RenShape® materials division from Huntsman in November 2011. See Note 3 to the Consolidated Financial Statements.

 

 

30


Table of Contents

Sales of integrated materials represented 52% of total print materials revenue in 2011, compared to 34% in 2010. Excluding the acquired Renshape® print materials revenue, integrated materials were 53% of total print materials revenue.

The increase in services revenue primarily reflects revenue from on-demand parts services, which was introduced in the fourth quarter of 2009, partially offset by a decrease in sales of printer upgrades. Service revenue from on-demand custom parts was $58.8 million, or 63.1%, of service revenue for 2011 compared to $18.3.million, or 39.2%, of 2010 service revenue. Of the $58.8 million of on-demand parts services revenue, $32.1 million was from businesses acquired in 2011. For the fourth quarter of 2011, revenue from on-demand parts services was $18.7 million, or 26.7%, of total fourth quarter revenue compared to $6.8 million, or 13.3%, of total 2010 fourth quarter revenue.

In addition to changes in sales volumes, there are two other primary drivers of changes in revenue from one period to another: the combined effect of changes in product mix and average selling prices, sometimes referred to as price and mix effects, and the impact of fluctuations in foreign currencies.

As used in this Management’s Discussion and Analysis, the price and mix effects relate to changes in revenue that are not able to be specifically related to changes in unit volume. Among these changes are changes in the product mix of our materials and our printers as the trend toward smaller, lower-priced printers has continued and the influence of new printers and materials on our operating results has grown.

2010 compared to 2009

Sales volumes of new products and services increased by $20.2 million in 2010, while the volume of core products and services sold increased by $30.8 million compared to 2009. Table 3 sets forth the change in revenue by class of product and service for 2010 compared to 2009.

Table 3

 

(dollars in thousands)    Printers and
Other Products
    Materials     Services     Totals  

2009 Revenue

   $ 30,501        27.0   $ 50,297        44.6   $ 32,037        28.4   $ 112,835        100
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Change in revenue:

                

Volume:

                

Core products and services

     6,192        20.3        10,890        21.7        13,749        42.9        30,831        27.3   

New products and services

     19,926        65.3        (1,476     (2.9     1,790        5.6        20,240        17.9   

Price/Mix

     (680     (2.2     (495     (1.0                   (1,175     (1.0

Foreign currency translation

     (1,253     (4.1     (785     (1.6     (825     (2.6     (2,863     (2.5
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net change

     24,185        79.3        8,134        16.2        14,714        45.9        47,033        41.7   
  

 

 

     

 

 

     

 

 

     

 

 

   

2010 Revenue

   $ 54,686        34.2   $ 58,431        36.6   $ 46,751        29.2   $ 159,868        100
  

 

 

     

 

 

     

 

 

     

 

 

   

As set forth in Table 1 and Table 3:

 

   

Revenue from printers and other products increased by $24.2 million, or 79.3%, to $54.7 million for 2010 from $30.5 million for 2009 and increased to 34.2% of consolidated revenue in 2010 from 27.0% in 2009. The increase in revenue from printers and other products that is due to volume for 2010 compared to 2009 was primarily the result of higher volume with a shift in the mix of printers and other products toward lower priced personal and professional printers. This increase was partially offset by a $0.7 million unfavorable effect of price and mix and a negative $1.3 million foreign currency translation impact.

 

   

Revenue from materials increased by $8.1 million, or 16.2%, to $58.4 million for 2010 from $50.3 million for 2009. Revenue from materials was aided by the improvement in production printer sales, which are typically accompanied by significant initial materials purchases to charge up new printers and commence production, and the continued expansion of printers installed over the past periods. Materials revenue

 

31


Table of Contents
 

volume from our core products increased $10.9 million, partially offset by a $1.5 million decrease in materials from our new products. The combined effect of product mix and average selling prices decreased by $0.5 million. Foreign currency translation had a $0.8 million negative impact on materials revenue.

 

   

Revenue from services increased $14.7 million for 2010 compared to 2009 and increased to 29.2% of consolidated revenue in 2010 from 28.4% in 2009 reflecting the effect of the increase in revenue from on-demand parts services, partially offset by a decrease in sales of printer upgrades. Service revenue from on-demand parts services was $18.3 million.

Revenue by geographic region

2011 compared to 2010

All geographic regions experienced higher levels of revenue in 2011 compared to 2010. This was principally due to continued economic recovery in 2011 and an increase in global R&D spendings, which we believe led to higher levels personal, professional and of production printer sales and print materials sales. Revenue from U.S. operations increased as a percentage of total revenue due to revenue related to increased acquisition activity in the U.S., including the acquisition of Quickparts. The continued volatility in foreign currencies led to increased positive impact of foreign currency translation for the European region, while a strengthening Japanese Yen resulted in a favorable foreign currency translation for the Asia-Pacific region.

Table 4 sets forth the change in revenue by geographic area for 2011 compared to 2010:

Table 4

 

(dollars in thousands)    U.S.     Europe     Asia-Pacific     Total  

2010 Revenue

   $ 72,452        45.3   $ 65,539         41.0   $ 21,877         13.7   $ 159,868        100
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

    

 

 

   

 

 

   

 

 

 

Change in revenue:

                  

Volume:

     49,628        68.5        12,841         19.6        6,267         28.6        68,736        43.0   

Price/Mix

     (4,341     (6.0     1,302         2.0        259         1.2        (2,780     (1.7

Foreign currency translation

                   3,642         5.6        957         4.4        4,599        2.8   
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

    

 

 

   

 

 

   

 

 

 

Net change

     45,287        62.5        17,785         27.1        7,483         34.2        70,555        44.1   
  

 

 

     

 

 

      

 

 

      

 

 

   

2011 Revenue

   $ 117,739        51.1   $ 83,324         36.2   $ 29,360         12.7   $ 230,423        100
  

 

 

     

 

 

      

 

 

      

 

 

   

As shown in Table 4:

 

   

Revenue from U.S. operations increased by $45.2 million, or 62.5%, in 2011 to $117.7 million from $72.5 million in 2010. This increase was due primarily to higher volume coupled with the unfavorable combined effect of price and mix.

 

   

Revenue from non-U.S. operations increased by $25.3 million, or 28.9%, to $112.7 million in 2011 from $87.4 million in 2010 and comprised 48.9% of consolidated revenue in 2011 compared to 54.7% in 2010. The increase in non-U.S. revenue, excluding the impact of foreign currency translation, was 23.5% in 2011.

 

   

Revenue from European operations increased by $17.8 million, or 27.2%, to $83.3 million in 2011 from $65.5 million in 2010. This increase was due to a $12.8 million increase in volume, a $3.6 million favorable effect of foreign currency translation and a $1.3 million combined favorable impact of price and mix.

 

   

Revenue from Asia-Pacific operations increased by $7.5 million, or 34.2%, to $29.4 million in 2011 from $21.9 million in 2010. This increase was caused primarily by a $6.2 million increase in volume, a $1.0 million favorable foreign currency translation and $0.3 million favorable combined effect of price and mix.

 

32


Table of Contents

2010 compared to 2009

Each geographic region experienced higher levels of revenue in 2010 compared to 2009. This was principally caused by continued economic recovery in 2010, which we believe led to higher levels of production printer sales. The continued volatility in foreign currencies led to increased negative impact of foreign currency translation for the European region, while a strengthening Japanese Yen resulted in favorable foreign currency translation for the Asia-Pacific region.

Table 5 sets forth the change in revenue by geographic area for 2010 compared to 2009.

Table 5

 

(dollars in thousands)    U.S.     Europe     Asia-Pacific     Total  

2009 Revenue

   $ 48,917         43.4   $ 48,740        43.2   $ 15,178         13.4   $ 112,835        100
  

 

 

    

 

 

   

 

 

   

 

 

   

 

 

    

 

 

   

 

 

   

 

 

 

Change in revenue:

                  

Volume:

     23,006         47.0        22,020        45.2        6,045         39.8        51,071        45.2   

Price/Mix

     529         1.1        (1,759     (3.6     55         0.4        (1,175     (1.0

Foreign currency translation

                    (3,462     (7.1     599         3.9        (2,863     (2.5
  

 

 

    

 

 

   

 

 

   

 

 

   

 

 

    

 

 

   

 

 

   

 

 

 

Net change

     23,535         48.1        16,799        34.5        6,699         44.1        47,033        41.7   
  

 

 

      

 

 

     

 

 

      

 

 

   

2010 Revenue

   $ 72,452         45.3   $ 65,539        41.0   $ 21,877         13.7   $ 159,868        100
  

 

 

      

 

 

     

 

 

      

 

 

   

As shown in Table 5:

 

   

Revenue from U.S. operations increased by $23.5 million or 48.1% in 2010 to $72.5 million from $48.9 million in 2009. This increase was due primarily to higher volume coupled with the favorable combined effect of price and mix.

 

   

Revenue from non-U.S. increased by $23.5 million or 36.8% to $87.4 million in 2010 from $63.9 million in 2009 and comprised 54.7% of consolidated revenue in 2010 compared to 56.6% in 2009. The increase in non-U.S. revenue, excluding the impact of foreign currency translation, was 41.2% in 2010, primarily due to an increase in volume of $28.1 million combined with an unfavorable combined effect of price and mix of $1.7 million and unfavorable foreign currency impact of $2.9 million.

 

   

Revenue from European operations increased by $16.8 million, or 34.5%, to $65.5 million in 2010 from $48.7 million in 2009. This increase was due to $22.0 million increase in volume, partially offset by a $3.5 million unfavorable effect of foreign currency translation as the U.S. Dollar weakened against the Euro and British Pound and a $1.8 million unfavorable combined effect of price and mix.

 

   

Revenue from Asia-Pacific operations increased by $6.7 million, or 44.1%, to $21.9 million in 2010 from $15.2 million in 2009. This increase was caused primarily by a $6.0 million increase in volume and a $0.6 million favorable effect of foreign currency translation in the Asia-Pacific region.

 

33


Table of Contents

Gross profit and gross profit margins

Gross profit margin improved in both 2011 and 2010. Table 6 sets forth gross profit and gross profit margin for our products and services.

Table 6

 

     Year Ended December 31,  
     2011     2010     2009  
(dollars in thousands)    Gross
Profit
     Gross
Profit
Margin
    Gross
Profit
     Gross
Profit
Margin
    Gross
Profit
     Gross
Profit
Margin
 

Printers and other products

   $ 24,967         37.4   $ 21,352         39.0   $ 7,824         25.7

Materials

     45,751         64.8        35,724         61.1        29,673         59.0   

Services

     38,310         41.1        16,900         36.1        12,233         38.2   
  

 

 

      

 

 

      

 

 

    

Total

   $ 109,028         47.3   $ 73,976         46.3   $ 49,730         44.1
  

 

 

      

 

 

      

 

 

    

On a consolidated basis, gross profit for 2011 increased by $35.0 million or 47%, to $109.0 million compared to $74.0 million and $49.7 million for 2010 and 2009, respectively. The higher gross profit margin reflects improved overhead absorption due to higher sales from all revenue categories, increased revenue from higher gross profit margin personal and professional materials and continued operational efficiencies. Gross profit margin for 2011 increased by 100 basis points from 46.3% in 2010 to 47.3% in 2011. Excluding acquisitions completed in 2011, gross profit margin was 49% compared to 46% in 2010 and gross profit margin excluding all acquisitions since 2009 was 52% in 2011 compared to 47% in 2010.

Printers and other products gross profit increased by 16.9% to $25.0 million in 2011 from $21.4 million in 2010, while the gross profit margin declined by 1.6 percentage points in 2011 to 37.4%. This decrease in gross profit margin resulted from a shift in mix towards lower gross profit margin personal, professional and production printers partially offset by the increased revenue from software which has higher gross profit margins.

Gross profit for materials improved by 28.1% to $45.8 million, with the gross profit margin increasing 3.7 percentage points to 64.8% from 61.1% in 2010. This is primarily due to the increase in sales volume of materials resulting in improved overhead absorption over higher revenue and a larger percentage of materials sales from higher gross profit margin integrated materials.

Gross profit for services increased by 126.7% to $38.3 million compared to $16.9 million in 2010, with the gross profit margin increasing 5.0 percentage points to 41.1%. The improved gross profit is due to the increased revenue from on-demand parts services. The increase in gross profit margin for services is reflected a 16.8 percentage point increase in on-demand parts service gross profit margin to 37.9% compared to 21.1% in 2010 and a 0.7 percentage point increase of printer services margin to 46.5% in 2011 compared to 45.8% in 2010.

Operating expenses

As shown in Table 7, total operating expenses increased by $21.1 million, or 39.7%, to $74.2 million for 2011 after increasing to $53.1 million for 2010 from $46.7 million for 2009, but decreased to 32.1% of revenue compared to 33.2% and 41.4% in 2010 and 2009, respectively. This increase consists of $17.5 million of higher selling, general and administrative expenses and $3.6 million of higher research and development expenses, both of which are discussed below.

During 2012, we expect to incur additional acquisition, restructuring and severance costs in the range of $2.0 million to $2.5 million, primarily during the first quarter, driven by the completion of the Z Corp. and Vider acquisitions and related integrations.

 

34


Table of Contents

Table 7

 

     Year Ended December 31,  
     2011     2010     2009  
(dollars in thousands)    Amount      %
Revenue
    Amount      %
Revenue
    Amount      %
Revenue
 

SG&A

   $ 59,795         26.0   $ 42,331         26.5   $ 35,528         31.5

R&D

     14,331         6.2        10,725         6.7        11,129         9.9   
  

 

 

    

 

 

   

 

 

    

 

 

   

 

 

    

 

 

 

Total

   $ 74,126         32.2   $ 53,056         33.2   $ 46,657         41.4
  

 

 

      

 

 

      

 

 

    

Selling, general, and administrative costs

2011 compared to 2010

Selling, general and administrative expenses increased by $17.5 million, or 41.3%, to $59.8 million in 2011 from $42.3 million in 2010. As a percentage of revenue, selling, general and administrative expenses were 26.0% and 26.5% in 2011 and 2010, respectively.

The $17.5 million increase in selling, general and administrative expenses in 2011 was primarily due to a $6.8 million increase in salary, benefits and contract labor costs. The majority of that was related to increased commissions on higher revenues and operating costs for newly acquired businesses. SG&A expenses were also impacted by a $1.6 million increase in bad debt expense, a $1.4 million increase in litigation costs and a $0.8 million increase in marketing costs. In addition, SG&A included $3.7 million of acquisition and severance expenses, primarily from fourth quarter acquisition activity.

Depreciation and amortization increased to $11.1 million in 2011 from $7.5 million in 2010. The increases in depreciation and amortization in 2011 and 2010 were primarily due to additional capital equipment placed in service and intangibles from acquired businesses.

2010 compared to 2009

Selling, general and administrative expenses increased by $6.8 million or 19.1%, to $42.3 million in 2010 from $35.5 million in 2009 after decreasing by $10.4 million in 2009. As a percentage of revenue, selling, general and administrative expenses were 26.5% and 31.5% in 2010 and 2009, respectively.

The $6.8 million increase in selling, general and administrative expenses in 2010 was primarily due to a $4.7 million increase in salary, benefits and contract labor costs. The majority of that was related to increased commissions on higher revenues and operating costs for newly acquired businesses. Additionally, SG&A expenses were impacted by a $2.2 million increase in litigation costs and a $0.5 million increase in marketing costs, partially offset by a $0.5 million lower franchise tax expense due to recognizing franchise tax credits.

Depreciation and amortization increased to $7.5 million in 2010 from $5.9 million in 2009. The increase in depreciation and amortization in 2010 was primarily due to additional capital equipment placed in service and intangibles acquired from on-demand parts service acquisitions.

Research and development expenses

Research and development expenses increased by 33.6% to $14.3 million in 2011 from $10.7 million in 2010. The $3.6 million increase in 2011 was due to a $2.0 million increase in R&D compensation expenses primarily due to new product development and investment in consumer solutions, a $1.0 million increase in materials and a $0.3 million increase in outside consulting services and contract labor and vendor and outside processing. In 2010, research and development expenses decreased 3.6% to $10.7 million from $11.1 million in 2009. The decrease in 2010 was principally due to a $0.3 million decrease in outside consulting services and a $0.1 million decrease in vendor and outside processing.

Income from operations

Operating income increased $14.0 million to $34.9 in 2011 compared to $20.9 million in 2010 and $3.1 million in 2009. The increase in operating income was primarily due to increased revenue in all categories, which led to improved overhead absorption, partially offset by increased operating expenses. See “Gross profit and gross profit margins” above.

 

35


Table of Contents

The following table sets forth operating income from operations by geographic area for 2011, 2010 and 2009.

Table 8

 

(dollars in thousands)    2011      2010      2009  

Income (loss) from operations:

        

United States

   $ 19,045       $ 10,946       $ (2,635

Germany

     1,509         935         278   

Other Europe

     6,645         1,935         1,279   

Asia-Pacific

     7,152         6,356         3,636   
  

 

 

    

 

 

    

 

 

 

Subtotal

     34,351         20,172         2,558   

Inter-segment elimination

     551         748         515   
  

 

 

    

 

 

    

 

 

 

Total

     34,902       $ 20,920       $ 3,073   
  

 

 

    

 

 

    

 

 

 

With respect to the U.S., in 2011, 2010 and 2009, the changes in operating income (loss) by geographic area reflected the same factors relating to our consolidated operating income that are discussed above.

As most of our operations outside the U.S. are conducted through sales and marketing subsidiaries, the changes in operating income in our operations outside the U.S. in each of 2011, 2010 and 2009 resulted primarily from changes in sales volume, transfer pricing and foreign currency translation.

Interest and other expenses, net

Interest and other expenses, net, which consists primarily of interest and other expense and foreign exchange gain or loss, amounted to $2.5 million of net expense for 2011. Interest and other expense, net amounted to $1.2 million for both 2010 and 2009. For 2011, interest and other expense, net included $2.1 million of interest expense, $0.4 million of other expense and $0.1 million of foreign exchange loss; partially offset by $0.1 million of interest and other income, compared to $0.9 million interest and other expense and $0.3 million foreign exchange loss for 2010. For 2009, interest and other expense, net included $1.1 million of interest and other expense and $0.1 million of foreign exchange loss. The 2011 increase resulted from lower interest income on investments in 2011 and increased interest expense related to the 5.50% senior convertible notes issued in November 2011 which amounted to $1.3 million of interest expense for 2011.

Provisions for income taxes

We recorded a $3.0 million benefit for income taxes in 2011. We recorded $0.2 million and $0.8 million of provisions for income taxes in 2010 and 2009, respectively. In 2011, this benefit primarily reflects a $6.2 million benefit due to $17.0 million release of valuation allowances associated with U.S. deferred tax assets, partially offset by $1.6 million of tax expense in foreign jurisdictions. In 2010, this provision primarily reflected $1.3 million of tax expense in foreign jurisdictions, partially offset by a $1.2 million benefit due to a $3.0 million release of valuation allowances associated with U.S. deferred tax assets.

In 2009 these provisions primarily reflect tax expense associated with income taxes in foreign jurisdictions.

During the second quarter of 2011, based upon our recent results of operations and expected profitability in the future, we concluded that it is more likely than not that a portion of our U.S. net deferred tax assets will be realized. As a result, in accordance with ASC 740, during 2011 we reversed $17.0 million of the valuation allowance applied to the U.S. net deferred tax assets. The reversal of the valuation allowance resulted in a non-cash income tax benefit of $6.2 million, which resulted in a benefit of $0.12 per share. During 2010, we reversed $3.0 million of the valuation allowance applied to the U.S. net deferred tax assets. The reversal of the valuation allowance resulted in a non-cash income tax benefit of $1.2 million, which resulted in a benefit of $0.03 per share.

 

 

36


Table of Contents

In conjunction with our ongoing review of our actual results and anticipated future earnings, we periodically reassess the possibility of releasing more of the valuation allowance currently in place on U.S. deferred tax assets. Based upon this assessment, a further release of the valuation allowance may occur during 2012 or in subsequent years. The required accounting for the release could involve significant tax amounts and would impact earnings in the quarter in which it was deemed appropriate to release the reserve. At December 31, 2011, the U.S. valuation allowance was approximately $8.8 million compared to $34.6 million at December 31, 2010.

The decrease in the valuation allowance against the net U.S. deferred income tax assets resulted primarily from the increase in our domestic net operating income, an increase in the amount of deferred income tax liabilities, including $7.2 million related to the senior convertible notes, and from the release of a portion of the valuation allowance against U.S. net deferred tax assets.

In 2009 these provisions primarily reflect tax expense associated with income taxes in foreign jurisdictions.

In 2011 and 2010, we utilized U.S. net operating loss carryforwards, which had had a full valuation allowance against them, to eliminate any U.S. federal taxes and to significantly reduce U.S state taxes. Absent the use of these net operating loss carryforwards, income tax expense would have been $5.1 million and $6.7 million, respectively, and the income tax rate would have been 15.6% and 33.9%, respectively. Absent the combined impact of the use of these net operating loss carryforwards and the release of the valuation allowances in 2011 and 2010, income tax expense would have been $11.3 million and $7.8 million, respectively, and the income tax rate would have been 34.8% and 39.3%, respectively.

Our $3.0 million benefit of income taxes in 2011 increased from 2010 principally due to the $6.2 million favorable impact from the release of valuation allowances associated with U.S. deferred tax assets.

Our $0.2 million provision for income taxes in 2010 decreased from 2009 principally due to the $1.2 million favorable impact from the release of valuation allowances associated with U.S. deferred tax assets. This decrease was partially offset by a $0.5 million increase in tax expense due to increased foreign income.

A substantial portion of our deferred income tax assets results from available net operating loss carryforwards in the jurisdictions in which we operate. Certain of these net operating loss carryforwards for U.S. state income tax purposes begin to expire in 2012, and certain of them begin to expire in later years for foreign and U.S. federal income tax purposes.

See Note 21 to the Consolidated Financial Statements.

Net income; net income available to 3D Systems common stockholders

In 2011 we generated net income of $35.4 million, compared to net income of $19.6 million in 2010 and net income of $1.1 million in 2009. The 2011 increase is attributed to increased revenue and gross profit, partially offset by an increase in operating expenses as described above.

The principal reasons for our higher net income in 2011, which are discussed in more detail above, were a $70.6 million increase in revenue and a $35.0 million increase in gross profit, partially offset by $21.0 million higher operating expenses as a result of higher commissions, operating costs of acquired companies and acquisition expenses.

The principal reasons for our higher net income in 2010, which are discussed in more detail above, were a $47.0 million increase in revenue and a $24.2 million increase in gross profit, partially offset by $6.4 million higher operating expenses as a result of higher commissions and operating costs of acquired companies.

Net income available to common stockholders was $35.4 million for 2011, $19.6 million for 2010 and $1.1 million for 2009. On a per share basis, our basic net income per share available to the common stockholders was $0.71 in 2011 and our diluted net income per share available to common stockholders was $0.70. In 2010, our basic net income per share available to the common stockholders was $0.42 and our diluted net income per share available to common stockholders was $0.42. This is an improvement over our net income per share available to the common stockholders, on both a basic and diluted basis, of $0.03 per share for 2009.

 

37


Table of Contents

The calculation of diluted income per share excludes options with an exercise price that exceeds the average market price of shares during the period, since the effect of their inclusion would have been anti-dilutive resulting in a reduction to the net earnings per share. The average outstanding diluted shares calculation also excludes shares that may be issued upon conversion of the outstanding senior convertible notes because their conversion price exceeded the market price of the shares at December 31, 2011.

See Note 18 to the Consolidated Financial Statements.

Other Financial Information

In addition to our results determined under U.S. generally accepted accounting principles (“GAAP”) discussed above, management believes non-GAAP financial measures which adjust net income and earnings per share are useful to investors in evaluating our operating performance.

We use non-GAAP financial measures of adjusted net income and adjusted earnings per share to supplement our Consolidated Financial Statements presented on a GAAP basis to facilitate a better understanding of the impact that several significant, strategic acquisitions had on our financial results.

These non-GAAP financial measures have not been prepared in accordance with GAAP and may be different from non-GAAP financial measures used by other companies and they are subject to inherent limitations as they reflect the exercise of judgments by our management about which costs, expenses and other items are excluded from our GAAP financial statements in determining our non-GAAP financial measures. We have sought to compensate for these limitations by analyzing current and expected future results on a GAAP basis as well as a non-GAAP basis and also by providing GAAP measures as required in our public disclosures and reconciliations of our non-GAAP financial measures of adjusted net income and adjusted earnings per share to our GAAP financial statements.

The presentation of our non-GAAP financial measures which adjust net income and earnings per share are not meant to be considered in isolation or as a substitute for the directly comparable financial measures prepared in accordance with GAAP. The non-GAAP financial measures are meant to supplement, and be viewed in conjunction with, GAAP financial measures. We urge investors to review the reconciliation of our non-GAAP financial measures to the comparable GAAP financial measures included below, and not to rely on any single financial measure to evaluate our business.

Our non-GAAP financial measures which adjust net income and earnings per share are adjusted for the following:

Stock-based compensation expenses.    We exclude the tax-effected stock-based compensation expenses from non-GAAP measures primarily because they are non-cash.

Amortization of intangibles.    We exclude the tax-effected amortization of intangible assets. The increase in recent periods is primarily in connection with acquisitions of businesses.

Acquisition and severance expenses.    We exclude the tax-effected charges associated with the acquisition of businesses and the related severance expenses.

Non-cash interest expenses.    We exclude tax-effected, non-cash interest expenses, primarily related to the amortization costs associated with our outstanding senior convertible notes.

Releases of valuation allowance on deferred tax assets.    We exclude the tax-effected, non-cash benefit of releases of portions of the valuation allowance on deferred tax assets.

 

38


Table of Contents

Reconciliation of GAAP Financial Measures to Non-GAAP Financial Measures

 

     Year Ended December 31,  
(dollars in thousands, except per share)    2011     2010     2009  

GAAP net income

     35,420        19,566        1,066   

Stock-based compensation

     2,637        1,406        1,190   

Amortization of intangibles(a)

     5,050        1,939        1,541   

Acquisition and severance expenses(b)

     3,664        646        156   

Non-cash interest expense

     400                 

Release of valuation allowance on deferred tax assets

     (6,221     (1,162       
  

 

 

   

 

 

   

 

 

 

Non-GAAP adjusted earnings

     40,950        22,395        3,953   
  

 

 

   

 

 

   

 

 

 

Non-GAAP adjusted basic earnings per share(a)

   $ 0.82      $ 0.49      $ 0.09   
  

 

 

   

 

 

   

 

 

 

Non-GAAP adjusted diluted earnings per share(c)

   $ 0.81      $ 0.48      $ 0.09   
  

 

 

   

 

 

   

 

 

 

 

(a) 

Represents amortization expense for the years ended December 31, 2011, 2010 and 2009 of which $237, $475 and $839, respectively, is included in cost of sales and the remaining $4,813, $1,464 and $351, respectively, is included in operating expenses.

 

(b) 

Represents acquisition and severance expenses. Expenses for 2011 include $3,664 of acquisition and severance expenses. Expenses for 2010 and 2009 include $646 and $156, respectively, of acquisition and severance expenses.

 

(c) 

Assumes in each period that the number of shares of common stock used in the calculation of earnings per share was unchanged from those presented in our consolidated statements of income and comprehensive income.

Liquidity and Capital Resources

Our cash flow from operations and the net proceeds from capital markets transactions in 2011 has enabled us to execute our growth strategies, including our acquisitions in 2011. During 2011, we generated $27.7 million of cash from operations and utilized $92.7 million of cash to fund acquisitions.

 

   

Operating cash flow, a key source of our liquidity, was $27.7 million in 2011, a decrease of $4.1 million, or 12.9%, as compared to 2010. In 2010, cash provided by operations was $31.8 million.

 

   

Unrestricted cash and cash equivalents increased by $141.8 million to $179.1 million at December 31, 2011 from $37.3 million at December 31, 2010 and $24.9 million at December 31, 2009. The cash at December 31, 2011 included $145.4 million net proceeds from senior convertible notes, of which $135.5 million was used to complete the acquisition of Z Corp and Vidar on January 3, 2012. During 2011, we also completed a common stock offering that resulted in net proceeds of $62.1 million.

 

   

Acquisitions constituted a $92.7 million use of cash in 2011, including the completion of twelve acquisitions as compared to $19.2 million for the completion of seven acquisitions in 2010.

 

   

Our net working capital increased by $159.9 million to $202.4 million at December 31, 2011, which included the net proceeds from the senior convertible notes issuance which was subsequently used to complete the purchase of Z Corp and Vidar, from $42.5 million at December 31, 2010.

 

39


Table of Contents

See Cash flow and Lease obligations below.

We have an effective registration statement on Form S-3 under which, among other things, we may issue up to $175 million of securities. We issued $65.8 million of Common Stock in 2011 in reliance upon this registration statement and the remaining $109.2 million of securities covered by it may be issued until March 3, 2014, although we have no current intention to do so.

During 2011, we completed a common stock offering that resulted in $62.1 million of cash, net and we competed a private placement of 5.5% Senior Convertible Notes due 2016 that resulted in $145.4 million of cash, net.

We have relied upon our unrestricted cash, cash flow from operations, and capital markets transactions to meet our cash requirements for working capital, capital expenditures and acquisitions. However, it is possible that we may need to raise additional funds to finance our activities beyond the next twelve months or to consummate significant acquisitions of other businesses, assets, products or technologies. If needed, we may be able to raise such funds through the sales of equity or debt securities to the public or selected investors, by borrowing from financial institutions, selling assets or restructuring debt. There is no assurance, however, that funds will be available from these sources in the amounts or on terms acceptance to us.

Even though we may not need additional funds, we may still elect to sell additional equity or debt securities or enter into a credit facility for other reasons. If we raise additional funds by issuing equity or convertible debt securities, the ownership percentages of existing shareholders would be reduced. In addition, the equity or debt securities that we may issue may have rights, preferences or privileges senior to those of our common stock.

Cash equivalents comprise funds held in money market instruments and are reported at their current carrying value, which approximates fair value due to the short term nature of these instruments. We minimize our credit risk by investing primarily in investment grade, liquid instruments and limit exposure to any one issuer depending upon credit quality.

A summary of the components of liquidity is shown below in Table 9.

Table 9

 

     December 31,  
(dollars in thousands)    2011      2010  

Cash and cash equivalents

   $ 179,120       $ 37,349   

Working capital

   $ 202,357       $ 42,475   

Total stockholders’ equity

   $ 254,788       $ 133,119   

Cash flow

A summary of the components of cash flows is shown below in Table 10.

Table 10

 

(dollars in thousands)    2011     2010     2009  

Net cash provided by operating activities

   $ 27,660      $ 31,844      $ 7,734   

Net cash used for investing activities

     (95,709     (20,774     (5,243

Net cash provided by financing activities

     209,975        1,041        273   

Effect of foreign currency exchange rates on cash

     (155     325        (15
  

 

 

   

 

 

   

 

 

 

Net increase in cash and cash equivalents

   $ 141,771      $ 12,436      $ 2,749   
  

 

 

   

 

 

   

 

 

 

 

40


Table of Contents

Cash flow from operations

2011 compared to 2010

For the year ended December 31, 2011, we generated $27.7 million of net cash from operating activities. This change in cash primarily consisted of our $35.4 million net income, $11.0 million of non-cash charges that were included in our net income and $18.7 million of cash used in net changes in operating accounts.

The principal changes in non-cash items that favorably affected operating cash flow included $11.5 million of depreciation and amortization expense, $2.6 million of stock-based compensation expense, partially offset by $5.1 million deferred tax benefit.

Changes in working capital that resulted in a source of cash included the following:

 

   

a $0.9 million increase in customer deposits; and

 

   

a $0.5 million increase in deferred revenue.

Customer deposits increased as a result of an increase in printer orders received near the end of the year. Deferred revenue increased as a result of warranties associated with increased sales of printers.

Changes in working capital that resulted in a use of cash included the following:

 

   

a $12.1 million increase in accounts receivable, net;

 

   

a $3.5 million decrease in accounts payable; and

 

   

a $2.6 million increase in inventory.

Inventories increased primarily due to the timing of orders and delivery of finished goods materials and raw materials, which are purchased in large quantities. Accounts payable decreased as a result of timing of orders and payments to vendors. Accounts receivable increased as a result of the record revenues for 2011 and the increase in days sales outstanding to 67 days in 2011 from 64 days in 2010.

2010 compared to 2009

For the year ended December 31, 2010, we generated $31.8 million of net cash from operating activities. This change in cash primarily consisted of our $19.6 million net income, $7.9 million of non-cash charges that were included in our net income and $4.4 million of cash provided by net changes in operating accounts.

The principal changes in non-cash items that favorably affected operating cash flow included $7.5 million of depreciation and amortization expense, $1.4 million of stock-based compensation expense, partially offset by $1.2 million deferred tax benefit.

Changes in working capital that resulted in a source of cash included the following:

 

   

a $10.4 million increase in accounts payable;

 

   

a $2.5 million increase in accrued liabilities; and

 

   

a $2.2 million increase in deferred revenue.

Accounts payable increased as a result of higher payables from increased purchases of machines and print materials associated with higher revenues, increased litigation costs and vendor payables associated with the acquisitions in 2010. Accrued liabilities increased primarily due to higher accrued payroll and liabilities for earnouts related to acquired companies. Deferred revenue increased as a result of warranties associated with increased sales of machines.

Changes in working capital that resulted in a use of cash included the following:

 

   

a $5.7 million increase in inventory; and

 

   

a $7.5 million increase in accounts receivable.

 

41


Table of Contents

Inventories increased primarily due to the timing of orders and delivery of finished goods materials and raw materials, which are purchased in large quantities. Accounts receivable increased as a result of the record revenues for the fourth quarter of 2010 and an increase in days sales outstanding from 60 days in 2009 to 64 days in 2010.

Cash flow from investing activities

Net cash used in investing activities in 2011 increased to $95.7 million from $20.8 million in 2010. In 2011 this consisted of $92.7 million related to acquisitions and $3.0 million of net purchases of property and equipment and additions to license and patent costs. See Notes 3, 5 and 6 to the Consolidated Financial Statements.

Net cash used in investing activities in 2010 increased to $20.8 million from $5.2 million in 2009. In 2010 this consisted of $19.2 million related to acquisitions and $1.6 million of net purchases of property and equipment and additions to license and patent costs, and in 2009 this consisted of $4.1 million related to acquisitions and $1.2 million related to purchases of property and equipment and additions to license and patent costs.

Capital expenditures were $2.9 million in 2011, $1.3 million in 2010 and $1.0 million in 2009. Capital expenditures in 2011 and 2010 primarily consisted of expenditures for tooling and printers associated with our new product development efforts and leasehold improvements and equipment to support our on-demand custom parts service.

As discussed below, we completed 22 business acquisitions during 2009, 2010 and 2011. The majority of the acquisitions have resulted in the recording of goodwill. This goodwill typically arises because the purchase price for these businesses reflects a number of factors including the future earnings and cash flow potential of these businesses; the multiples to earnings, cash flow and other factors at which similar businesses have been purchased by other acquirers; the competitive nature of the process by which we acquired the business; and the complementary strategic fit and resulting synergies these businesses bring to existing operations. See Note 7 to the Consolidated Financial Statements.

2011 acquisitions

We acquired twelve businesses in 2011 for cash consideration of $87.4 million, with an additional $3.0 of consideration paid in the form of common stock, net of cash acquired. Five of the acquisitions were related to on-demand custom parts services, four were building blocks for our consumer growth initiative and three acquisitions were related to our printers business. In addition, we made deferred purchase payments of $3.7 million in connection with acquisitions completed in 2010. See Note 3 to the Consolidated Financial Statements.

2010 acquisitions

We acquired seven businesses in 2010 for consideration of $17.9 million, net of cash acquired. Six of the acquisitions were related to on-demand custom parts services and one acquisition was related to personal 3D printers. In addition, in 2010 we made deferred payments of $1.3 million in connection with the 2009 acquisitions. See Note 3 to the Consolidated Financial Statements.

2009 acquisitions

We acquired three businesses in 2009 for consideration of $4.1 million, net of cash acquired. Two of the acquisitions were related to our on-demand custom parts services, and one acquisition was related to personal 3D printers.

Recent acquisition developments

As discussed above, subsequent to our 2011 year end, we utilized $135.5 million of cash in connection with the acquisition of Z Corp and Vidar. See Notes 3 and 25 to the Consolidated Financial Statements.

 

42


Table of Contents

Cash flow from financing activities

As previously discussed, we have an effective registration statement on Form S-3 under which, among other things, we may issue up to $175.0 million of securities. We issued $65.8 million of Common Stock in 2011 in reliance upon this registration statement and the remaining $109.2 million of securities covered by it may be issued until March 3, 2014, although we have no current intention to do so. Subject to the limitations of our Certificate of Incorporation and applicable law, we are not restricted from issuing additional common stock, including securities that are convertible into or exchangeable for, or that represent the right to receive, common stock.

In early 2011, we completed an equity offering netting $62.1 million in proceeds after deducting related expenses. In November 2011, we issued $152.0 million in senior convertible notes due 2016 in a private placement, netting $145.4 million in proceeds after deducting related expenses, of which $135.5 million was subsequently paid to complete the acquisition of Z Corp and Vidar on January 3, 2012. See Notes 3 and 25 to the Consolidated Financial Statements.

Net cash provided by financing activities increased to $210.0 million in 2011 from $1.0 million in 2010. Net cash provided by financing activities in 2009 was $0.3 million. The increase in 2011 primarily resulted from the previously discussed net proceeds of the common stock issuance and net proceeds of the convertible notes issuance and from $2.8 million of stock-based compensation proceeds.

The cash provided by financing activities in 2010 resulted primarily from higher stock option exercise activity.

Contractual Commitments and Off-Balance Sheet Arrangements

Our principal commitments at December 31, 2011 consisted of the stock purchase agreement (the “stock purchase agreement”) to purchase all of the outstanding capital stock of Z Corp and Vidar as discussed above, the capital leases on our Rock Hill facility, operating leases, deferred purchase price and earnouts on acquisitions and purchase obligations, which are discussed in greater detail below. Tables 11 and 12 below summarize our contractual obligations as of December 31, 2011.

Future contractual payments at December 31, 2011 are set forth below.

Table 11

 

     Year Ending December 31,  
(dollars in thousands)    2012      2013–2014      2015–2016      Later Years      Total  

Capitalized lease obligations

   $ 696       $ 1,391       $ 1,389       $ 11,052       $ 14,528   

Non-cancelable operating leases

     2,517         2,364         1,361         488         6,730   

Purchase obligations

     10,940                                 10,940   

Deferred purchase price on acquisitions

     639         781                         1,420   

Earnouts on acquisitions

     745         1,117                         1,862   

Acquisition of Z Corp and Vidar

     135,488                                 135,488   

Principal of senior convertible notes

                     152,000                 152,000   

Interest on senior convertible notes

     12,340         25,905         27,179                 65,424   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 163,365       $ 31,558       $ 181,929       $ 11,540       $ 388,392   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Acquisition obligations

As discussed above, in November 2011, we entered into a stock purchase agreement to acquire Z Corp and Vidar. See “Recent Developments” and Notes 3 and 25 to the Consolidated Financial Statements.

Debt and lease obligations

Debt

As discussed above, in November 2011, we issued senior convertible notes due 2016 in an aggregate principal amount of $152.0 million. These notes bear interest at a fixed rate of 5.50% per annum, payable June 15

 

43


Table of Contents

and December 15 of each year while they are outstanding, beginning June 15, 2012. The net proceeds of the notes were used to fund the acquisition of Z Corp and Vidar and for general corporate purposes. See Recent Developments above and Notes 3 and 25 to the Consolidated Financial Statements.

The Notes have an initial conversion rate of 46.6021 shares of Common Stock per $1,000 principal amount of Notes, which amounts to a conversion price of $21.46 per common share. Upon conversion, the Company has the option to pay cash or issue Common Stock, or a combination thereof. The Notes are convertible at the option of the holders at any time. The aggregate principal amount of these Notes then outstanding matures on December 15, 2016, unless earlier converted, redeemed or repurchased in accordance with the terms of the Notes.

The Notes contain a number of covenants covering, among other things, payment of notes, reporting, maintenance of existence and payment of taxes. Failure to comply with these covenants, or any other event of default, could result in acceleration of the principal amount and accrued and unpaid interest on the notes. We were in compliance with all covenants as of December 31, 2011. See Note 11 to the Consolidated Financial Statements. The Notes are senior in right of payment (as defined in the Notes Agreement).

Leases

On February 8, 2006, we entered into a lease agreement with KDC-Carolina Investments 3, LP (now Lex Rock Hill, LP) pursuant to which KDC constructed and leased to us an approximately 80,000 square foot building in Rock Hill, South Carolina. Under the terms of this lease, KDC agreed to lease the building to us for an initial 15-year term following completion. We took occupancy of the building in November 2006. See Note 12 to the Consolidated Financial Statements.

After its initial term, the lease provides us with the option to renew the lease for two additional five-year terms as well as the right to cause KDC, subject to certain terms and conditions, to expand the leased premises during the term of the lease, in which case the term of the lease would be extended. The lease is a triple net lease and provides for the payment of base rent of approximately $0.7 million in 2012 through 2020, including a rent escalation in 2016, and $0.8 million in 2021. Under the terms of the lease, we are obligated to pay all taxes, insurance, utilities and other operating costs with respect to the leased premises.

In accordance with ASC 840, “Leases,” we are considered an owner of the property. Therefore, we have recorded $7.8 million and $8.3 million at December 31, 2011 and 2010, respectively, as building in our consolidated balance sheet with a corresponding capitalized lease obligation in the liabilities section of the consolidated balance sheet. See Note 12 to the Consolidated Financial Statements.

Our outstanding capitalized lease obligations at December 31, 2011 and December 31, 2010 were as follows:

Table 12

 

(dollars in thousands)    2011      2010  

Capitalized lease obligations:

     

Current portion of capitalized lease obligation

   $ 163       $ 224   

Capitalized lease obligation, less current portion

     7,609         8,055   
  

 

 

    

 

 

 

Total

   $ 7,772       $ 8,279   
  

 

 

    

 

 

 

 

Capitalized lease obligations of $7.8 million at December 31, 2011 decreased from $8.3 million at December 31, 2010 primarily due to scheduled payments of principal on capital lease installments and the purchase of expansion land, previously leased from our landlord, KDC Developments, in 2011.

We lease certain other facilities under non-cancelable operating leases expiring through 2023. The leases are generally on a net-rent basis, under which we pay taxes, maintenance and insurance. We expect leases that expire to be renewed or replaced by leases on other properties. Rental expense for the years ended December 31, 2011, 2010 and 2009 was $2.7 million, $2.0 million and $1.7 million, respectively.

 

44


Table of Contents

Other contractual commitments

As of December 31, 2011, we have supply commitments for first quarter of 2012 printer assembly that total $10.9 million compared to $9.3 million at December 31, 2010.

For certain of our acquisitions, we are obligated for the payment of deferred purchase price totaling $1.4 million. Certain of the acquisition purchase agreements contain earnout provisions under which the sellers of the acquired businesses can earn additional amounts. The total amount of liabilities recorded for these earnouts is $1.9 million at December 31, 2011 compared to $3.3 million at December 31, 2010. See Note 3 for details of acquisitions and related commitments.

Indemnification

In the normal course of business we periodically enter into agreements to indemnify customers or suppliers against claims of intellectual property infringement made by third parties arising from the use of our products. Historically, costs related to these indemnification provisions have not been significant. We are unable to estimate the maximum potential impact of these indemnification provisions on our future results of operations.

To the extent permitted under Delaware law, we indemnify our directors and officers for certain events or occurrences while the director or officer is, or was, serving at our request in such capacity, subject to limited exceptions. The maximum potential amount of future payments we could be required to make under these indemnification obligations is unlimited; however, we have directors and officers insurance coverage that may enable us to recover future amounts paid, subject to a deductible and the policy limits.

We do not utilize any “structured debt,” “special purpose” or similar unconsolidated entities for liquidity or financing purposes.

Financial instruments

We conduct business in various countries using both the functional currencies of those countries and other currencies to effect cross border transactions. As a result, we are subject to the risk that fluctuations in foreign exchange rates between the dates that those transactions are entered into and their respective settlement dates will result in a foreign exchange gain or loss. When practicable, we endeavor to match assets and liabilities in the same currency on our balance sheet and those of our subsidiaries in order to reduce these risks. We also, when we consider it to be appropriate, enter into foreign currency contracts to hedge exposures arising from those transactions.

We do not hedge for trading or speculative purposes, and our foreign currency contracts are generally short-term in nature, typically maturing in 90 days or less. We have elected not to prepare and maintain the documentation to qualify for hedge accounting treatment under ASC 815, “Derivatives and Hedging,” and therefore, we recognize all gains and losses (realized or unrealized) in interest and other income (expense), net in our Consolidated Statements of Income and Other Comprehensive Income.

Changes in the fair value of derivatives are recorded in interest and other income (expense), net, in our Consolidated Statements of Income and Other Comprehensive Income. Depending on their fair value at the end of the reporting period, derivatives are recorded either in prepaid and other current assets or in accrued liabilities in our Consolidated Balance Sheets.

The total impact of foreign currency related items on our Consolidated Statements of Income and Comprehensive Income were losses of $0.1 million, $0.3 million, and $0.1 million for 2011, 2010 and 2009, respectively.

Critical Accounting Policies and Significant Estimates

The discussion and analysis of our results of operations and financial condition set forth in this Form 10-K is based on our Consolidated Financial Statements, which have been prepared in accordance with U.S. generally accepted accounting principles. The preparation of these financial statements requires us to make critical accounting estimates that directly impact our Consolidated Financial Statements and related disclosures.

 

45


Table of Contents

Critical accounting estimates are estimates that meet two criteria:

 

   

The estimates require that we make assumptions about matters that are highly uncertain at the time the estimates are made; and

 

   

There exist different estimates that could reasonably be used in the current period, or changes in the estimates used are reasonably likely to occur from period to period, both of which would have a material impact on our results of operations or financial condition.

On an ongoing basis, we evaluate our estimates, including those related to stock-based compensation, revenue recognition, the allowance for doubtful accounts, income taxes, inventories, goodwill and other intangible and long-lived assets and contingencies. We base our estimates and assumptions on historical experience and on various other assumptions that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

The following paragraphs discuss the items that we believe are the critical accounting policies most affected by significant management estimates and judgments. Management has discussed and periodically reviews these critical accounting policies, the basis for their underlying assumptions and estimates and the nature of our related disclosures herein with the Audit Committee of the Board of Directors.

Revenue recognition

Revenue from the sale of printers and related products and print materials is recognized upon shipment or when services are performed, provided that persuasive evidence of a sales arrangement exists, both title and risk of loss have passed to the customer and collection is reasonably assured. Persuasive evidence of a sales arrangement exists upon execution of a written sales agreement or a signed purchase order that constitutes a fixed and legally binding commitment between us and the buyer. In instances where sales are made to an authorized reseller, the same criteria cited above is applied to determine the recognition of revenue. The reseller’s creditworthiness is evaluated prior to such sale. The reseller takes ownership of the related printers, products or materials and payment is not dependent upon the reseller’s sale to an end user.

We enter into sales arrangements that may provide for multiple deliverables to a customer. Sales of our printers may include equipment, a software license, a warranty on the equipment, training and installation. We identify all goods and/or services that are to be delivered separately under a sales arrangement and allocate revenue to each deliverable based on relative fair values. Fair values are generally established based on the prices charged when sold separately by us. In general, revenues are separated between printers and other products, training services, maintenance services and installation services. The allocated revenue for each deliverable is then recognized ratably based on relative fair values of the components of the sale, consistent within the scope of FASB ASU 2009-13. Revenue from training, installation and maintenance services is recognized at the time of performance. Revenue from training, installation and maintenance that is not under a maintenance contract is recognized after the services are complete. We also evaluate the impact of undelivered items on the functionality of delivered items for each sales transaction and, where appropriate, defer revenue on delivered items when that functionality has been affected. Functionality is determined to be met if the delivered products or services represent a separate earnings process.

We provide end-users with maintenance under a warranty agreement for up to one year and defer a portion of the revenue from the related printer sale at the time of sale based on the relative fair value of those services. After the initial warranty period, the Company offers these customers optional maintenance contracts. Deferred maintenance revenue is recognized ratably, on a straight-line basis, over the period of the contract.

On-demand printed parts sales are included within services revenue and revenue is recognized upon shipment or delivery of the parts, based on the terms of the sales arrangement.

We sell equipment with embedded software to our customers. The embedded software is not sold separately, it is not a significant focus of the marketing effort and we do not provide post-contract customer support specific to the software or incur significant costs that are within the scope of the FASB Accounting Standards

 

46


Table of Contents

Codification (“ASC”) 985, “Software.” Additionally, the functionality that the software provides is marketed as part of the overall product. The software embedded in the equipment is incidental to the equipment as a whole such that ASC 985 is not applicable. Sales of these products are recognized in accordance with ASC 605.25, “Multiple-Element Arrangements.”

Shipping and handling costs billed to customers for equipment sales are included in product revenue in the Consolidated Statement of Income and Comprehensive Income. Costs we incur that are associated with shipping and handling are included in product cost of sales in the Consolidated Statement of Income and Comprehensive Income.

Credit is extended, and creditworthiness is determined, based on an evaluation of each customer’s financial condition. New customers are generally required to complete a credit application and provide references and bank information to facilitate an analysis of creditworthiness. Customers with a favorable profile may receive credit terms based on that profile that differ from our general credit terms. Creditworthiness is considered, among other things, in evaluating our relationship with customers with past due balances.

Our terms of sale generally require payment within 30 to 60 days after shipment of a product although we also recognize that longer payment periods are customary in some countries in which we transact business. To reduce credit risk in connection with printers sales, we may, depending upon the circumstances, require significant deposits prior to shipment and may retain a security interest in a system sold until fully paid. In some circumstances, we may require payment in full for our products prior to shipment and may require international customers to furnish letters of credit. For services, we either bill customers on a time-and-materials basis or sell customers service agreements that are recorded as deferred revenue and provide for payment in advance on either an annual or other periodic basis.

Allowance for doubtful accounts

In evaluating the collectability of our accounts receivable, we assess a number of factors, including a specific client’s ability to meet its financial obligations to us, such as whether a customer declares bankruptcy. Other factors include the length of time the receivables are past due and historical collection experience. Based on these assessments, we record a reserve for specific customers as well as a general reserve based on our historical experience for bad debts. If circumstances related to specific customers change, or economic conditions deteriorate such that our past collection experience is no longer relevant, our estimate of the recoverability of our accounts receivable could be further reduced from the levels provided for in the Consolidated Financial Statements.

Our estimate for the allowance for doubtful accounts related to trade receivables is based on two methods. The amounts calculated from each of these methods are combined to determine the total amount reserved.

First, we evaluate specific accounts where we have information that the customer may have an inability to meet their financial obligations (for example, aging over 90 days past due or bankruptcy). In these cases, we use our judgment, based on available facts and circumstances, and record a specific reserve for that customer against amounts due to reduce the receivable to the amount that is expected to be collected. These specific reserves are re-evaluated and adjusted as additional information is received that impacts the amount reserved.

Second, a general reserve is established for all customers based on historical collection and write-off experience.

Our estimate of the allowance for doubtful accounts for financing receivables is determined by evaluating specific accounts for which the borrower is past due more than 90 days, or for which it has information that the borrower may be unable to meet its financial obligations (for example, bankruptcy). In these cases, we use judgment, based on the available facts and circumstances, and record a specific reserve for that borrower against amounts due to reduce the outstanding receivable balance to the amount that is expected to be collected. If there are any specific reserves, they are re-evaluated and adjusted as additional information is received that impacts the amount reserved.

We also provide an allowance account for returns and discounts. This allowance is evaluated on a specific account basis. In addition, we provide a general reserve for all customers that have not been specifically identified based on historical experience.

 

47


Table of Contents

Our bad debt expense increased to $1.7 million in 2011 from $0.1 million in 2010 and $0.9 million in 2009. The higher expense in 2011 was due to an increase in balances due from customers over 90 days past due.

Our allowance for doubtful accounts increased to $3.0 million at December 31, 2011 from $2.0 million at December 31, 2010. This change resulted primarily from an increase in receivables over 90 days past due. We believe that our allowance for doubtful accounts is a critical accounting estimate because it is susceptible to change and dependent upon events that may or may not occur and because the impact of recognizing additional allowances for doubtful accounts may be material to the assets reported on our balance sheet and in our results of operations.

Income taxes

We and our domestic subsidiaries file a consolidated U.S. federal income tax return. Our non-U.S. subsidiaries file income tax returns in their respective local jurisdictions. We provide for income taxes on those portions of our foreign subsidiaries’ accumulated earnings that we believe are not reinvested indefinitely in their businesses.

We account for income taxes under the asset and liability method. Deferred income tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and tax benefit carryforwards. Deferred income tax liabilities and assets at the end of each period are determined using enacted tax rates.

We record deferred income tax assets arising from temporary differences between recorded net income and taxable net income when and if we believe that future earnings will be sufficient to realize the tax benefit. We provide a valuation allowance for those jurisdictions and on those deferred tax assets where the expiration date of tax benefit carryforwards or the projected taxable earnings indicate that realization is not likely.

Under the provisions of ASC 740, “Income Taxes,” a valuation allowance is required to be established or maintained when, based on currently available information and other factors, it is more likely than not that all or a portion of a deferred income tax asset will not be realized. ASC 740 provides that an important factor in determining whether a deferred income tax asset will be realized is whether there has been sufficient income in recent years and whether sufficient income is expected in future years in order to utilize the deferred income tax asset.

During the second quarter of 2011, based on our recent results of operations and our expected profitability in the future, we concluded that it is more likely than not that a portion of our U.S. net deferred tax asset will be realized. See Note 21 to the Consolidated Financial Statements.

We believe that our estimate of deferred income tax assets and our maintenance of a valuation allowance against such assets are critical accounting estimates because they are subject to, among other things, an estimate of future taxable income in the U.S. and in other non-U.S. tax jurisdictions, which are susceptible to change and dependent upon events that may or may not occur, and because the impact of our valuation allowance may be material to the assets reported on our balance sheet and in our results of operations. We intend to continue to assess our valuation allowance in accordance with the requirements of ASC 740.

The determination of our income tax provision is complex because we have operations in numerous tax jurisdictions outside the U.S. that are subject to certain risks that ordinarily would not be expected in the U.S. Tax regimes in certain jurisdictions are subject to significant changes, which may be applied on a retroactive basis. If this were to occur, our tax expense could be materially different than the amounts reported.

We periodically estimate the probable tax obligations using historical experience in tax jurisdictions and our informed judgment. There are inherent uncertainties related to the interpretation of tax regulations in the jurisdictions in which we transact business. The judgments and estimates made at a point in time may change based on the outcome of tax audits, as well as changes to, or further interpretations of, regulations. Income tax expense is adjusted in the period in which these events occur, and these adjustments are included in our Consolidated Statements of Income and Other Comprehensive Income. If such changes take place, there is a risk that our effective tax rate may increase or decrease in any period.

 

48


Table of Contents

Inventories

Inventories are stated at the lower of cost or net realizable value, cost being determined predominantly on the first-in, first-out method. Reserves for inventories are provided based on historical experience and current product demand. Our inventory reserve was $2.5 million at December 31, 2011 compared with $2.2 million at December 31, 2010. We evaluate the adequacy of these reserves quarterly. Our determination of the allowance for inventory reserves is subject to change because it is based on management’s current estimates of required reserves and potential adjustments.

We believe that the allowance for inventory obsolescence is a critical accounting estimate because it is susceptible to change and dependent upon events that may or may not occur and because the impact of recognizing additional obsolescence reserves may be material to the assets reported on our balance sheet and in our results of operations.

Goodwill and other intangible and long-lived assets

We evaluate long-lived assets other than goodwill for impairment whenever events or changes in circumstances indicate that the carrying value of an asset may not be recoverable. If the estimated future cash flows (undiscounted and without interest charges) from the use of an asset are less than the carrying value, a write-down would be recorded to reduce the related asset to its estimated fair value.

The annual impairment testing required by ASC 350, “Intangibles — Goodwill and Other,” requires us to use our judgment and could require us to write down the carrying value of our goodwill and other intangible assets in future periods. As required by ASC 350, we have allocated goodwill to identifiable geographic reporting units, which are tested for impairment using a two-step process detailed in that statement. See Notes 6 and 7 to the Consolidated Financial Statements. The first step requires comparing the fair value of each reporting unit with our carrying amount, including goodwill. If that fair value exceeds the carrying amount, the second step of the process is not required to be performed and no impairment charge is required to be recorded. If that fair value does not exceed the carrying amount, we must perform the second step, which requires an allocation of the fair value of the reporting unit to all assets and liabilities of that unit as if the reporting unit had been acquired in a purchase business combination and the fair value of the reporting unit was the purchase price. The goodwill resulting from that purchase price allocation is then compared to the carrying amount with any excess recorded as an impairment charge.

Goodwill set forth on the Consolidated Balance Sheet as of December 31, 2011 arose from acquisitions carried out in 2011, 2010 and 2009 and in years prior to 2007. Goodwill arising from acquisitions prior to 2007 was allocated to geographic reporting units based on the percentage of SLS® printers then installed by geographic area. Goodwill arising from acquisitions since 2009 was allocated to geographic reporting units based on geographic dispersion of the acquired companies’ sales at the time of their acquisition.

Pursuant to the requirements of ASC 350, we are required to perform a valuation of each of our three geographic reporting units annually, or upon significant changes in our business environment. We conducted our annual impairment analysis in the fourth quarter of 2011. To determine the fair value of each reporting unit we utilized discounted cash flows, using five years of projected unleveraged free cash flows and terminal EBITDA earnings multiples. The discount rates used for the analysis reflected a weighted average cost of capital based on industry and capital structure adjusted for equity risk premiums and size risk premiums based on market capitalization. The discounted cash flow valuation uses projections of future cash flows and includes assumptions concerning future operating performance and economic conditions and may differ from actual future cash flows. We also considered the current trading multiples of comparable publicly-traded companies and the historical pricing multiples for comparable merger and acquisition transactions that have occurred in the industry. Under each fair value measurement methodology considered, the fair value of each reporting unit exceeded its carrying value; accordingly, no goodwill impairment adjustments were recorded on our Consolidated Balance Sheet.

The control premium that a third party would be willing to pay to obtain a controlling interest in 3D Systems Corporation was considered when determining fair value. In addition, factors such as the performance of competitors were also considered. Management concluded that there was a reasonable basis for the excess of the estimated fair value of the geographic reporting units over its market capitalization.

 

49


Table of Contents

The estimated fair value of the three geographic reporting units incorporated judgment and the use of estimates by management. Potential factors requiring assessment include a further or sustained decline in our stock price, variance in results of operations from projections, and additional acquisition transactions in the industry that reflect a lower control premium. Any of these factors may cause us to re-evaluate goodwill during any quarter throughout the year. If an impairment charge were to be taken for goodwill it would be a non-cash charge and would not impact our cash position or cash flows, however such a charge could have a material impact to equity and the Consolidated Statement of Income and Comprehensive Income.

There was no goodwill impairment for the years ended December 31, 2011, 2010 or 2009.

We will evaluate the fair value of long-lived assets in accordance with ASC 360, “Property, Plant and Equipment” if events transpire to indicate potential impairment. No impairment loss was recorded for the periods presented.

Determining the fair value of a reporting unit, intangible asset or a long-lived asset is judgmental and involves the use of significant estimates and assumptions. Management bases its fair value estimates on assumptions that it believes are reasonable but are uncertain and subject to changes in market conditions.

Stock-based compensation

ASC 718, “Compensation — Stock Compensation,” requires the recognition of the fair value of stock-based compensation. Under the fair value recognition provisions of ASC 718, stock-based compensation is estimated at the grant date based on the fair value of the awards expected to vest and recognized as expense ratably over the requisite service period of the award. See Note 14 to the Consolidated Financial Statements.

Contingencies

We account for contingencies in accordance with ASC 450, “Contingencies.” ASC 450 requires that we record an estimated loss from a loss contingency when information available prior to issuance of our financial statements indicates that it is probable that an asset has been impaired or a liability has been incurred at the date of the financial statements and the amount of the loss can be reasonably estimated. Accounting for contingencies such as legal matters requires us to use our judgment.

Non-GAAP Measures

In addition to our results determined in accordance with U.S. GAAP, we use certain non-GAAP financial measures, which adjust net income and earnings per share, in assessing our operating performance. Management believes these non-GAAP financial measures of adjusted net income and adjusted earnings per share serve as useful measures in evaluating the overall performance of our business.

Our management regularly uses these non-GAAP financial measures to supplement our Consolidated Financial Statements presented on a GAAP basis to facilitate a better understanding of the impact that several significant, strategic acquisitions had on our financial results.

These non-GAAP financial measures are not prepared in accordance with GAAP and may be different from non-GAAP financial measures used by other companies and they are subject to inherent limitations as they reflect the exercise of judgments by our management about which costs, expenses and other items are excluded from our GAAP financial statements in determining our non-GAAP financial measures. We compensate for these limitations by analyzing current and expected future results on a GAAP basis as well as a non-GAAP basis and also by providing GAAP measures as required in our public disclosures and reconciliations of our non-GAAP financial measures to our GAAP financial statements. The presentation of non-GAAP financial information is not meant to be considered in isolation or as a substitute for the directly comparable financial performance or liquidity measures prepared in accordance with GAAP. The non-GAAP financial measures are meant to supplement, and be viewed in conjunction with, GAAP financial measures. We urge investors to review the reconciliation of our non-GAAP financial measures to the comparable GAAP financial measures included below, and not to rely on any single financial measure to evaluate our business.

 

50


Table of Contents

As discussed in detail above, we report non-GAAP financial measures which adjust both net income and earnings per share by excluding the impact of acquisition and severance expenses, intangible amortization, non-cash interest expense, non-cash stock-based compensation and releases of valuation allowances on deferred tax assets. We provide the required reconciliation of GAAP net income and earnings per share to non-GAAP adjusted net income and adjusted earnings per share. See Other Financial Information above.

Recent Accounting Pronouncements

See Note 2 to our Consolidated Financial Statements included in this report for recently issued accounting standards, including the expected dates of adoption and expected impact to our Consolidated Financial Statements upon adoption.

 

Item 7A.    Quantitative and Qualitative Disclosures about Market Risk

We are exposed to market risk from fluctuations in interest rates, foreign currency exchange rates, and commodity prices, which may adversely affect our results of operations and financial condition. We seek to minimize these risks through regular operating and financing activities and, when we consider it to be appropriate, through the use of derivative financial instruments. We do not purchase, hold or sell derivative financial instruments for trading or speculative purposes.

Interest rates

Our exposure to market risk for changes in interest rates relates primarily to our cash and cash equivalents. We seek to minimize the risk to our cash and cash equivalents by investing cash in excess of our operating needs in short-term, high-quality instruments issued by highly creditworthy financial institutions, corporations or governments. With the amount of cash and cash equivalents that we maintained at December 31, 2011, a hypothetical interest rate change of 1 percentage point or 100 basis points would have a $1.8 million effect on our financial position and results of operations.

From time to time, we may use derivative financial instruments, including interest rate swaps, collars or options, to manage our exposure to fluctuations in interest rates. At December 31, 2011, we had no such financial instruments outstanding.

Foreign exchange rates

We transact business globally and are subject to risks associated with fluctuating foreign exchange rates. Approximately 50% of our consolidated revenue is derived from sales outside of the U.S. See “Business—Global Operations” above. This revenue is generated primarily from the operations of our foreign sales subsidiaries in their respective countries and surrounding geographic areas and the operations of our research and production subsidiary in Switzerland, and is denominated in each subsidiary’s local functional currency although certain sales are denominated in other currencies, including U.S. Dollars, Euros or Japanese Yen, rather than the local functional currency. These subsidiaries incur most of their expenses (other than intercompany expenses) in their local functional currencies. These currencies include the Euro, Australian Dollar, British Pound, Swiss Franc and Japanese Yen.

The geographic areas outside the U.S. in which we operate are generally not considered to be highly inflationary. Nonetheless, these foreign operations are sensitive to fluctuations in currency exchange rates arising from, among other things, certain intercompany transactions that are generally denominated in U.S. Dollars rather than in their respective functional currencies. Our operating results, as well as our assets and liabilities, are also subject to the effects of foreign currency translation when the operating results, assets and liabilities of our foreign subsidiaries are translated into U.S. Dollars in our Consolidated Financial Statements.

We and our subsidiaries conduct business in various countries using both the functional currencies of those countries and other currencies to effect cross border transactions. As a result, we and our subsidiaries are subject to the risk that fluctuations in foreign exchange rates between the dates that those transactions are entered into and their respective settlement dates will result in a foreign exchange gain or loss. When practicable, we

 

51


Table of Contents

endeavor to match assets and liabilities in the same currency on our U.S. balance sheet and those of our subsidiaries in order to reduce these risks. We also, when we consider it appropriate, enter into foreign currency contracts to hedge exposures arising from those transactions.

We do not hedge for trading or speculative purposes, and our foreign currency contracts are generally short-term in nature, typically maturing in 90 days or less. We have elected not to prepare and maintain the documentation to qualify for hedge accounting treatment under ASC 815, “Derivatives and Hedging,” and therefore, we recognize all gains and losses (realized or unrealized) in interest and other income (expense), net in our Consolidated Statements of Income and Comprehensive Income.

As noted above, we may use derivative financial instruments, including foreign exchange forward contracts and foreign currency options, to fix or limit our exposure to currency fluctuations. We do not hedge our foreign currency exposures in a manner that would entirely eliminate the effects of changes in foreign exchange rates on our consolidated net income or loss.

At December 31, 2011, a hypothetical change of 10% in foreign currency exchange rates would cause approximately a $11.3 million change in revenue in our Consolidated Statement of Income and Comprehensive Income assuming all other variables were held constant.

Commodity prices

We use various commodity raw materials and energy products in conjunction with our printer assembly and print materials blending processes. Generally, we acquire such components at market prices and do not use financial instruments to hedge commodity prices. As a result, we are exposed to market risks related to changes in commodity prices of these components. At December 31, 2011, a hypothetical 10% change in commodity prices for raw materials would cause approximately a $3.3 million change to cost of sales in our Consolidated Statement of Income and Comprehensive Income.

 

Item 8. Financial Statements and Supplementary Data

Our Consolidated Financial Statements set forth below on pages F-1 through F-45 are incorporated herein by reference.

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not applicable.

 

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

Disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (“the Exchange Act”)) are controls and procedures that are designed to provide reasonable assurance that information required to be disclosed in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, in a manner to allow timely decisions regarding required disclosures.

As of December 31, 2011, we carried out an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934, as amended (the “Exchange Act.”)) pursuant to Rules 13a-15 and 15d-15 under the Exchange Act. These controls and procedures were designed to provide reasonable assurance that information required to be disclosed in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, in a manner to allow timely decisions regarding required disclosures. Based on this evaluation,

 

52


Table of Contents

including an evaluation of the rules referred to above in this Item 9A, management has concluded that our disclosure controls and procedures were effective as of December 31, 2011 to provide reasonable assurance that information required to be disclosed in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, in a manner to allow timely decisions regarding required disclosures.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. Internal control over financial reporting is a process designed under the supervision of our principal executive and principal financial officers to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America.

Our internal control over financial reporting is supported by written policies and procedures that pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets, provide reasonable assurance that transactions are recorded as necessary to permit the preparation of financial statements in accordance with accounting principles generally accepted in the United States of America and that our receipts and expenditures are being made and recorded only in accordance with authorizations of our management and provide reasonable assurance regarding the prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.

In connection with the preparation of this Form 10-K, with the participation of our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2011 based on the criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Our assessment included an evaluation of the design of our internal control over financial reporting and testing of the operational effectiveness of our internal control over financial reporting. Based on this evaluation, our management has concluded that our internal control over financial reporting was effective as of December 31, 2011.

Because of its inherent limitations, a system of internal control over financial reporting can provide only reasonable assurance and may not prevent or detect misstatements. In addition, projections of any evaluation of effectiveness to future periods are subject to the risks that controls may become inadequate because of changes in conditions and that the degree of compliance with the policies or procedures may deteriorate.

BDO USA, LLP, the independent registered public accounting firm who audited our Consolidated Financial Statements included in this Form 10-K, has issued a report on our internal control over financial reporting, which is included in Item 8 of this Form 10-K.

Changes in Internal Controls over Financial Reporting

There were no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act) during the quarter ended December 31, 2011 that materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

Item 9A(T). Controls and Procedures

Not applicable.

 

Item 9B. Other Information

None.

 

53


Table of Contents

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance

The information required in response to this Item will be set forth in our Proxy Statement for our 2012 Annual Meeting of Stockholders under the captions “Election of Directors,” “Corporate Governance Matters,” “Section 16(a) Beneficial Ownership Reporting Compliance,” “Corporate Governance Matters — Code of Conduct and Code of Ethics,” “Corporate Governance Matters — Corporate Governance and Nominating Committee,” and “Corporate Governance Matters — Audit Committee.” Such information is incorporated herein by reference.

 

Item 11. Executive Compensation

The information in response to this Item will be set forth in our Proxy Statement for our 2012 Annual Meeting of Stockholders under the captions “Director Compensation,” “Executive Compensation,” “Corporate Governance Matters — Compensation Committee,” and “Executive Compensation — Compensation Committee Report.” Such information is incorporated herein by reference.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Except as set forth below, the information required in response to this Item will be set forth in our Proxy Statement for our 2012 Annual Meeting of Stockholders under the caption “Security Ownership of Certain Beneficial Owners and Management.” Such information is incorporated herein by reference.

Equity Compensation Plans

The following table summarizes information about the equity securities authorized for issuance under our compensation plans as of December 31, 2011. For a description of these plans, please see Note 14 to the Consolidated Financial Statements.

 

(number of securities in thousands)

Plan Category

   Number of securities
to be issued upon
exercise of

outstanding options,
warrants and rights
     Weighted average
exercise price of
outstanding
options,
warrants and  rights
     Number of  securities
remaining

available for
future issuance
under equity
compensation plans
 

Equity compensation plans approved by stockholders

     387       $ 4.03         2,217   

Equity compensation plans not approved by stockholders

     689         3.61           
  

 

 

       

 

 

 

Total

     1,076       $ 3.76         2,217   
  

 

 

       

 

 

 

 

Item 13. Certain Relationships and Related Transactions and Director Independence

The information required in response to this Item will be set forth in our Proxy Statement for our 2012 Annual Meeting of Stockholders under the captions “Corporate Governance Matters — Director Independence” and “Corporate Governance Matters — Related Party Transaction Policies and Procedures.” Such information is incorporated herein by reference.

 

Item 14. Principal Accounting Fees and Services

The information in response to this Item will be set forth in our Proxy Statement for our 2012 Annual Meeting of Stockholders under the caption “Fees of Independent Registered Public Accounting Firm.” Such information is incorporated herein by reference.

 

54


Table of Contents

PART IV

 

Item 15. Exhibits, Financial Statement Schedules

 

(a)(3)

  

Exhibits

   The following exhibits are included as part of this filing and incorporated herein by this reference:
2.1    Acquisition Agreement, dated October 12, 2010, by and among 3D Systems Corporation, 3D Systems Italia, Mr. Francesco Giorgio Buson and Glas S.S. (Incorporated by reference to Exhibit 2.1 to Form 8-K filed on October 12, 2010.)
2.2    Asset Purchase Agreement, dated as of November 1, 2011, by an among 3D Systems Corporation, 3D Systems SA, Huntsman Advanced Materials Americas LLC, and Huntsman Advanced Materials (Switzerland) GmbH. (Incorporated by reference to Exhibit 2.1 to Form 8-K filed on November 1, 2011.)
2.3    Stock Purchase Agreement, dated November 21, 2011, by and among 3D Systems Corporation, 3D Systems, Inc., Contex Group A/S, and Ratos AB. (Incorporated by reference to Exhibit 2.1 to Form 8-K filed on November 22, 2011.)
3.1    Certificate of Incorporation of Registrant. (Incorporated by reference to Exhibit 3.1 to Form 8-B filed on August 16, 1993, and the amendment thereto, filed on Form 8-B/A on February 4, 1994.)
3.2    Amendment to Certificate of Incorporation filed on May 23, 1995. (Incorporated by reference to Exhibit 3.2 to Registrant’s Registration Statement on Form S-2/A, filed on May 25, 1995.)
3.3    Certificate of Designation of Rights, Preferences and Privileges of Preferred Stock. (Incorporated by reference to Exhibit 2 to Registrant’s Registration Statement on Form 8-A filed on January 8, 1996.)
3.4    Certificate of Designation of the Series B Convertible Preferred Stock, filed with the Secretary of State of Delaware on May 2, 2003. (Incorporated by reference to Exhibit 3.1 to Registrant’s Current Report on Form 8-K, filed on May 7, 2003.)
3.5    Certificate of Elimination of Series A Preferred Stock filed with the Secretary of State of Delaware on March 4, 2004. (Incorporated by reference to Exhibit 3.6 of Registrant’s Annual Report on Form 10-K for the year ended December 31, 2003, filed on March 15, 2004.)
3.6    Certificate of Elimination of Series B Preferred Stock filed with the Secretary of State of Delaware on June 9, 2006. (Incorporated by reference to Exhibit 3.1 of Registrant’s Current Report on Form 8-K, filed on June 9, 2006.)
3.7    Certificate of Amendment of Certificate of Incorporation filed with Secretary of State of Delaware on May 19, 2004. (Incorporated by reference to Exhibit 3.1 of the Registrant’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2004, filed on August 5, 2004.)
3.8    Certificate of Amendment of Certificate of Incorporation filed with Secretary of State of Delaware on May 17, 2005. (Incorporated by reference to Exhibit 3.1 of the Registrant’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2005, filed on August 1, 2005.)
3.9    Certificate of Amendment of Certificate of Incorporation filed with the Secretary of State of Delaware on October 7, 2011. (Incorporated by reference to Exhibit 3.1 to Form 8-K filed on October 7, 2011.)
3.10    Certificate of Designations, Preferences and Rights of Series A Preferred Stock, filed with the Secretary of State of Delaware on December 9, 2008. (Incorporated by reference to Exhibit 3.1 of Registrant’s Current Report on Form 8-K, filed on December 9, 2008.)
3.11    Certificate of Elimination of Series A Preferred Stock filed with the Secretary of State of Delaware on November 14, 2011. (Incorporated by reference to Exhibit 3.1 to Form 8-K filed on November 15, 2011.)
3.12    Amended and Restated By-Laws. (Incorporated by reference to Exhibit 3.2 of the Registrant’s Current Report on Form 8-K, filed on December 1, 2006.)

 

55


Table of Contents

(a)(3)

  

Exhibits

4.1*    3D Systems Corporation 1996 Stock Incentive Plan. (Incorporated by reference to Appendix A to Registrant’s Definitive Proxy Statement filed on March 30, 2001.)
4.2*    Form of Incentive Stock Option Contract for Executives pursuant to the 1996 Stock Incentive Plan. (Incorporated by reference to Exhibit 4.6 of Registrant’s Annual Report on Form 10-K for the year ended December 31, 2000, filed on March 16, 2001.)
4.3*    Form of Non-Statutory Stock Option Contract for Executives pursuant to the 1996 Stock Incentive Plan. (Incorporated by reference to Exhibit 4.7 of Registrant’s Annual Report on Form 10-K for the year ended December 31, 2000, filed on March 16, 2001.)
4.4*    Form of Employee Incentive Stock Option Contract pursuant to the 1996 Stock Incentive Plan. (Incorporated by reference to Exhibit 4.8 of Registrant’s Annual Report on Form 10-K for the year ended December 31, 1999, filed on March 30, 2000.)
4.5*    Form of Employee Non-Statutory Stock Option Contract pursuant to the 1996 Stock Incentive Plan. (Incorporated by reference to Exhibit 4.9 of Registrant’s Annual Report on Form 10-K for the year ended December 31, 1999, filed on March 30, 2000.)
4.6*    3D Systems Corporation 1996 Non-Employee Directors’ Stock Option Plan. (Incorporated by reference to Appendix B to Registrant’s Definitive Proxy Statement filed on March 30, 2001.)
4.7*    Form of Director Option Contract pursuant to the 1996 Non-Employee Director Stock Option Plan. (Incorporated by reference to Exhibit 4.5 of Registrant’s Annual Report on Form 10-K for the year ended December 31, 1999, filed on March 30, 2000.)
4.8*    3D Systems Corporation 2001 Stock Option Plan. (Incorporated by reference to Exhibit 10.1 to Registrant’s Registration Statement on Form S-8 filed on June 11, 2001.)
4.9*    Amended and Restated 2004 Incentive Stock Plan of 3D Systems Corporation (Incorporated by reference to Exhibit 4.1 to the Registrant’s Amendment No.1 to Registration Statement on Form S-8, filed May 20, 2009.)
4.10*    Form of Restricted Stock Purchase Agreement for Employees. (Incorporated by reference to Exhibit 4.2 to the Registrant’s Registration Statement on Form S-8, filed on May 19, 2004.)
4.11*    Form of Restricted Stock Purchase Agreement for Officers. (Incorporated by reference to Exhibit 4.3 to the Registrant’s Registration Statement on Form S-8, filed on May 19, 2004.)
4.12*    Restricted Stock Plan for Non-Employee Directors of 3D Systems Corporation. (Incorporated by reference to Exhibit 4.4 to the Registrant’s Registration Statement on Form S-8, filed on May 19, 2004.)
4.13*    Amendment No. 1 to Restricted Stock Plan for Non-Employee Directors. (Incorporated by reference to Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2005, filed on August 1, 2005.)
4.14*    Form of Restricted Stock Purchase Agreement for Non-Employee Directors. (Incorporated by reference to Exhibit 4.5 to the Registrant’s Registration Statement on Form S-8, filed on May 19, 2004.)
4.15    Rights Agreement dated as of December 9, 2008 between the Registrant and Computershare Trust Company, N.A., as Rights Agent. (Incorporated by reference to Exhibit 4.1 to the Registrant’s Current Report on Form 8-K, filed on December 9, 2008.)
4.16    First Amendment , dated as of November 14, 2011, to Rights Agreement, dated as of December 9, 2008, between 3D Systems Corporation and Computershare Trust Company, N.A., as Rights Agent. (Incorporated by reference to Exhibit 4.1 to Form 8-K filed on November 15, 2011.)
4.17    Indenture, dated as of November 22, 2011, by and between 3D Systems Corporation and Wells Fargo Bank, National Association, as Trustee (incorporated by reference to Exhibit 4.1 to Form 8-K filed on November 22, 2011.)

 

56


Table of Contents

(a)(3)

  

Exhibits

10.1    Patent License Agreement dated December 16, 1998 by and between 3D Systems, Inc., NTT Data CMET, Inc. and NTT Data Corporation. (Incorporated by reference to Exhibit 10.56 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 1998, filed on March 31, 1999.)
10.2    Lease Agreement dated February 8, 2006 between the Registrant and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 99.1 to Registrant’s Current Report on Form 8-K, filed on February 10, 2006.)
10.3    First Amendment to Lease Agreement dated August 7, 2006 between the Registrant and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 of Registrant’s Current Report on Form 8-K, filed on August 14, 2006.)
10.4    Second Amendment to Lease Agreement effective as of October 6, 2006 to Lease Agreement dated February 8, 2006 between 3D Systems Corporation and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 of Registrant’s Current Report on Form 8-K, filed on October 10, 2006.)
10.5    Third Amendment to Lease Agreement effective as of December 18, 2006 to Lease Agreement dated February 8, 2006 between 3D Systems Corporation and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 of Registrant’s Current Report on Form 8-K, filed on December 20, 2006.)
10.6    Fourth Amendment to Lease Agreement effective as of February 26, 2007 to Lease Agreement dated February 8, 2006 between 3D Systems Corporation and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 of Registrant’s Current Report on Form 8-K, filed on March 1, 2007.)
10.7    Fifth Amendment to Lease Agreement effective as of March 17, 2011 to Lease Agreement dated February 8, 2006 between 3D Systems Corporation and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 to Form 8-K filed on March 18, 2011.)
10.8*    Employment Letter Agreement, effective September 19, 2003, by and between Registrant and Abraham N. Reichental. (Incorporated by reference to Exhibit 10.1 to Registrant’s Current Report on Form 8-K, filed on September 22, 2003.)
10.9*    Agreement, dated December 17, 2003, by and between Registrant and Abraham N. Reichental. (Incorporated by reference to Exhibit 10.43 to Registrant’s Amendment No. 1 to Registration Statement on Form S-1, filed on January 21, 2004.)
10.10*    First Amendment to Employment Agreement, dated July 24, 2007, by and between Registrant and Abraham N. Reichental. (Incorporated by reference to Exhibit 10.1 to Registrant’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2007, filed on August 6, 2007.)
10.11*    Charles W. Hull consulting arrangement (Incorporated by reference to Exhibit 10.1 of the Registrant’s Quarterly Report on Form 10-Q filed on July 29, 2010.)
10.12*    Kevin P. McAlea severance arrangement (Incorporated by reference to Exhibit 10.1 of the Registrant’s Quarterly Report on Form 10-Q filed on July 29, 2010.)
14.1    Code of Conduct, as amended effective as of November 30, 2006 (Incorporated by reference to Exhibit 99.1 of the Registrant’s Current Report on Form 8-K, filed on December 1, 2006.)
14.2    3D Systems Corporation Code of Ethics for Senior Financial Executives and Directors. (Incorporated by reference to Exhibit 14.2 of the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2003, filed on March 15, 2004.)
21.1    Subsidiaries of Registrant.
23.1    Consent of Independent Registered Public Accounting Firm dated February 23, 2012.
31.1    Certification of Principal Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, dated February 23, 2012.

 

57


Table of Contents

(a)(3)

  

Exhibits

31.2    Certification of Principal Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, dated February 23, 2012.
32.1    Certification of Principal Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, dated February 23, 2012.
32.2    Certification of Principal Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, dated February 23, 2012.

 

* Management contract or compensatory plan or arrangement.

 

58


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on our behalf by the undersigned, thereunto duly authorized.

3D SYSTEMS CORPORATION

 

By:

 

/s/    ABRAHAM N. REICHENTAL

  Abraham N. Reichental
  President and Chief Executive Officer

Date: February 23, 2012

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of registrant and in the capacities and on the dates indicated.

 

Signature

  

Title

 

Date

/S/    ABRAHAM N. REICHENTAL

Abraham N. Reichental

  

Chief Executive Officer, President and

Director (Principal Executive Officer)

  February 23, 2012

/S/     DAMON J. GREGOIRE

Damon J. Gregoire

  

Senior Vice President and Chief Financial Officer (Principal Financial and

Accounting Officer)

  February 23, 2012

/S/    CHARLES W. HULL

Charles W. Hull

  

Executive Vice President, Chief

Technology Officer and Director

  February 23, 2012

/S/    G. WALTER LOEWENBAUM, II

G. Walter Loewenbaum, II

   Chairman of the Board of Directors   February 23, 2012

/S/    JIM D. KEVER

Jim D. Kever

   Director   February 23, 2012

/S/    KEVIN S. MOORE

Kevin S. Moore

   Director   February 23, 2012

/S/    DANIEL S. VAN RIPER

Daniel S. Van Riper

   Director   February 23, 2012

/S/    WILLIAM E. CURRAN

William E. Curran

   Director   February 23, 2012

/S/    KAREN E. WELKE

Karen E. Welke

   Director   February 23, 2012

 

59


Table of Contents

3D Systems Corporation

Index to Consolidated Financial Statements

and Consolidated Financial Statement Schedule

 

Consolidated Financial Statements

  

Report of Independent Registered Public Accounting Firm

     F-2   

Report of Independent Registered Public Accounting Firm

     F-3   

Consolidated Balance Sheets as of December 31, 2011 and 2010

     F-4   

Consolidated Statements of Income and Comprehensive Income for the Years Ended December  31, 2011, 2010, and 2009

     F-5   

Consolidated Statements of Stockholders’ Equity for the Years Ended December  31, 2011, 2010 and 2009

     F-6   

Consolidated Statements of Cash Flows for the Years Ended December 31, 2011, 2010, and 2009

     F-7   

Notes to Consolidated Financial Statements for the Years Ended December 31, 2011, 2010 and 2009

     F-8   

Consolidated Financial Statement Schedule

  

Report of Independent Registered Public Accounting Firm

     F-48   

Schedule II — Valuation and Qualifying Accounts for the Years Ended December  31, 2011, 2010 and 2009

     F-49   

 

F-1


Table of Contents

Report of Independent Registered Public Accounting Firm

To the Stockholders and Board of Directors

3D Systems Corporation

Rock Hill, South Carolina

We have audited 3D Systems Corporation and its subsidiaries’ (the “Company”) internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). 3D Systems Corporation’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying “Item 9A, Management’s Report on Internal Control over Financial Reporting.” Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, 3D Systems Corporation did maintain, in all material respects, effective internal control over financial reporting as of December 31, 2011, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of 3D Systems Corporation and its subsidiaries as of December 31, 2011 and 2010, and the related consolidated statements of income and comprehensive income, stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2011 and our report dated February 23, 2012 expressed an unqualified opinion thereon.

/s/    BDO USA, LLP

BDO USA, LLP

Charlotte, North Carolina

February 23, 2012

 

F-2


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and Board of Directors of

3D Systems Corporation

Rock Hill, South Carolina

We have audited the accompanying consolidated balance sheets of 3D Systems Corporation and its subsidiaries (the “Company”) as of December 31, 2011 and 2010 and the related consolidated statements of income and comprehensive income, stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2011. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the Consolidated Financial Statements referred to above present fairly, in all material respects, the financial position of 3D Systems Corporation and its subsidiaries as of December 31, 2011 and 2010 and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2011 in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the effectiveness of the Company’s internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO Criteria) and our report dated February 23, 2012 expressed an unqualified opinion thereon.

/s/    BDO USA, LLP

BDO USA, LLP

Charlotte, North Carolina

February 23, 2012

 

F-3


Table of Contents

3D Systems Corporation

Consolidated Balance Sheets

As of December 31, 2011 and 2010

 

(in thousands, except par value)    2011     2010  
ASSETS   

Current assets:

    

Cash and cash equivalents

   $ 179,120      $ 37,349   

Accounts receivable, net of allowance for doubtful accounts of $3,019 (2011) and $2,017 (2010)

     51,195        35,800   

Inventories, net of reserves of $2,542 (2011) and $2,205 (2010)

     25,283        23,811   

Prepaid expenses and other current assets

     2,241        1,295   

Current deferred income taxes

     3,528        1,874   

Restricted cash

     13        11   
  

 

 

   

 

 

 

Total current assets

     261,380        100,140   

Property and equipment, net

     29,594        27,669   

Intangible assets, net

     54,040        18,275   

Goodwill

     107,651        58,978   

Long-term deferred income taxes

     3,195          

Other assets, net

     7,114        3,738   
  

 

 

   

 

 

 

Total assets

   $ 462,974      $ 208,800   
  

 

 

   

 

 

 
LIABILITIES AND EQUITY   

Current liabilities:

    

Current portion of capitalized lease obligation

   $ 163      $ 224   

Accounts payable

     25,911        26,556   

Accrued liabilities

     16,816        17,969   

Customer deposits

     3,398        2,298   

Deferred revenue

     12,735        10,618   
  

 

 

   

 

 

 

Total current liabilities

     59,023        57,665   

Long-term portion of capitalized lease obligation

     7,609        8,055   

Convertible senior notes, net

     131,107          

Other liabilities

     10,447        9,961   
  

 

 

   

 

 

 

Total liabilities

     208,186        75,681   

Commitments and contingencies

              

Stockholders’ equity:

    

Preferred Stock, authorized 5,000 shares, none issued

              

Common stock, $0.001 par value, authorized 120,000 (2011) and 60,000 shares (2010); 50,975 (2011) and 46,948 (2010) issued

     51        23   

Additional paid-in capital

     274,542        186,252   

Treasury stock, at cost; 324 shares (2011) and 268 shares (2010)

     (214     (189

Accumulated deficit

     (22,531     (57,925

Accumulated other comprehensive income

     2,940        4,958   
  

 

 

   

 

 

 

Total equity

     254,788        133,119   
  

 

 

   

 

 

 

Total liabilities and equity

   $ 462,974      $ 208,800   
  

 

 

   

 

 

 

See accompanying notes to consolidated financial statements.

 

F-4


Table of Contents

3D Systems Corporation

Consolidated Statements of Income and Comprehensive Income

Years Ended December 31, 2011, 2010 and 2009

 

(in thousands, except per share amounts)    2011     2010     2009  

Revenue:

      

Products

   $ 137,306      $ 113,117      $ 80,798   

Services

     93,117        46,751        32,037   
  

 

 

   

 

 

   

 

 

 

Total revenue

     230,423        159,868        112,835   
  

 

 

   

 

 

   

 

 

 

Cost of sales:

      

Products

     66,589        56,041        43,301   

Services

     54,806        29,851        19,804   
  

 

 

   

 

 

   

 

 

 

Total cost of sales

     121,395        85,892        63,105   
  

 

 

   

 

 

   

 

 

 

Gross profit

     109,028        73,976        49,730   
  

 

 

   

 

 

   

 

 

 

Operating expenses:

      

Selling, general and administrative

     59,795        42,331        35,528   

Research and development

     14,331        10,725        11,129   
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     74,126        53,056        46,657   
  

 

 

   

 

 

   

 

 

 

Income from operations

     34,902        20,920        3,073   

Interest and other expense, net

     2,456        1,181        1,160   
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     32,446        19,739        1,913   

Provision for (benefit of) income taxes

     (2,974     173        774   
  

 

 

   

 

 

   

 

 

 

Net income

     35,420        19,566        1,139   

Less: net income attributable to non-controlling interest

                   73   
  

 

 

   

 

 

   

 

 

 

Net income available to 3D Systems common stockholders

   $ 35,420      $ 19,566      $ 1,066   
  

 

 

   

 

 

   

 

 

 

Other comprehensive income:

      

Unrealized (loss) on pension obligation

     (275     (65     (57

Foreign currency translation gain (loss)

     (1,743     406        (35
  

 

 

   

 

 

   

 

 

 

Comprehensive income available to 3D Systems common stockholders

   $ 33,402      $ 19,907      $ 974   
  

 

 

   

 

 

   

 

 

 

Net income available to 3D Systems common stockholders per
share — basic

   $ 0.71      $ 0.42      $ 0.02   
  

 

 

   

 

 

   

 

 

 

Net income available to 3D Systems common stockholders per
share — diluted

   $ 0.70      $ 0.42      $ 0.02   
  

 

 

   

 

 

   

 

 

 

See accompanying notes to consolidated financial statements.

 

F-5


Table of Contents

3D Systems Corporation

Consolidated Statements of Stockholders’ Equity

Years Ended December 31, 2011, 2010 and 2009

 

(in thousands, except par value)   Equity Attributable to 3D Systems’ Stockholders     Equity
Attributable to
Non-controlling
Interest
    Total
Equity
 
  Common Stock     Treasury Stock     Accumulated
Deficit
    Accumulated
Other
Comprehensive
Income
    Total
3D Systems’
Stockholders’
Equity
     
  Shares     Par
Value
$0.001
    Additional
Paid-in
Capital
    Shares     Amount            

Balance at December 31, 2008

    22,424      $ 22      $ 176,180        59      $ (120   $ (78,557   $ 4,709      $ 102,234      $      $ 102,234   

Exercise of stock options

    15        (a)      84                                    84               84   

Issuance (repurchase) of restricted stock, net

    335        1        228        15        (14                   215               215   

Stock compensation expense

           (a)      1,190                                    1,190               1,190   

Net income

                                       1,066               1,066        73        1,139   

Foreign currency translation adjustment

                                              (35     (35            (35

Loss on pension plan — unrealized

                                              (57     (57            (57
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2009

    22,774      $ 23      $ 177,682        74      $ (134   $ (77,491   $ 4,617      $ 104,697      $ 73      $ 104,770   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Exercise of stock options

    79        (a)      1,128                                    1,128               1,128   

Issuance (repurchase) of restricted stock, net

    160        (a)      141        60        (55                   86               86   

Issuance of stock for acquisitions

    461        (a)      5,895                                    5,895               5,895   

Stock compensation expense

           (a)      1,406                                    1,406               1,406   

Net income

                                       19,566               19,566               19,566   

Acquisition of non-controlling interest

                                                            (73     (73

Foreign currency translation adjustment

                                             
406
  
   
406
  
          
406
  

Loss on pension plan — unrealized

                                              (65     (65            (65
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2010

    23,474      $ 23      $ 186,252        134      $ (189   $ (57,925   $ 4,958      $ 133,119      $      $ 133,119   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Exercise of stock options

    306        (a)      2,536                               2,536               2,536   

Issuance (repurchase) of restricted stock, net

    253        (a)      253        190        (25                   228               228   

Stock-based compensation expense

    8          2,637                                    2,637               2,637   

Issuance of common stock

    1,495        2        62,052                                    62,054               62,054   

Issuance of stock for acquisitions

    110        (a)      3,042                                    3,042               3,042   

Common stock dividend

    25,329        26                             (26                            

Issuance of convertible notes

                  17,770                                    17,770               17,770   

Net income

                                       35,420               35,420               35,420   

Foreign currency translation adjustment

                                              (1,743     (1,743            (1,743

Loss on pension plan — unrealized

                                              (275     (275            (275
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2011

    50,975      $ 51      $ 274,542        324      $ (214   $ (22,531   $ 2,940      $ 254,788      $      $ 254,788   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

  

 

(a) Amounts not shown due to rounding.

Accumulated other comprehensive income of $2,940 consists of a cumulative unrealized loss on pension plan of $194 and foreign currency translation gain of $3,134.

See accompanying notes to consolidated financial statements.

 

F-6


Table of Contents

3D Systems Corporation

Consolidated Statements of Cash Flows

Years Ended December 31, 2011, 2010 and 2009

 

(in thousands)    2011     2010     2009  

Cash flows from operating activities:

      

Net income

   $ 35,420      $ 19,566      $ 1,139   

Adjustments to reconcile net income to net cash provided by operating activities:

      

Provision for (benefit of) deferred income taxes

     (5,140     (1,235     309   

Depreciation and amortization

     11,502        7,520        5,886   

Provisions for bad debts, net

     1,731        102        909   

Stock-based compensation

     2,637        1,406        1,190   

Loss on disposition of property and equipment

     256        91        194   

Changes in operating accounts:

      

Accounts receivable

     (12,090     (7,456     1,430   

Inventories

     (2,608     (5,693     2,436   

Prepaid expenses and other current assets

     45        1,366        (371

Accounts payable

     (3,457     10,433        (4,395

Accrued liabilities

     141        2,505        617   

Customer deposits

     857        1,677        (529

Deferred revenue

     525        2,188        (1,106

Other operating assets and liabilities

     (2,159     (626     25   
  

 

 

   

 

 

   

 

 

 

Net cash provided by operating activities

     27,660        31,844        7,734   
  

 

 

   

 

 

   

 

 

 

Cash flows from investing activities:

      

Purchases of property and equipment

     (2,870     (1,283     (974

Proceeds from disposition of property and equipment and other assets

     174        6        52   

Cash paid for acquisitions, net of cash assumed

     (92,677     (19,195     (4,098

Additions to license and patent costs

     (336     (302     (223
  

 

 

   

 

 

   

 

 

 

Net cash used in investing activities

     (95,709     (20,774     (5,243
  

 

 

   

 

 

   

 

 

 

Cash flows from financing activities:

      

Proceeds from convertible notes

     148,960                 

Convertible notes capitalized costs

     (3,594              

Proceeds from issuance of common stock

     62,054                 

Proceeds from exercise of stock options and restricted stock

     2,764        1,214        298   

Repayment of long-term debt and capital lease obligations

     (221     (216     (195

Repayment of short-term borrowings

                   (3,085

Restricted cash

     12        43        3,255   
  

 

 

   

 

 

   

 

 

 

Net cash provided by financing activities

     209,975        1,041        273   

Effect of exchange rate changes on cash

     (155     325        (15
  

 

 

   

 

 

   

 

 

 

Net increase in cash and cash equivalents

     141,771        12,436        2,749   

Cash and cash equivalents at the beginning of the period

     37,349        24,913        22,164   
  

 

 

   

 

 

   

 

 

 

Cash and cash equivalents at the end of the period

   $ 179,120      $ 37,349      $ 24,913   
  

 

 

   

 

 

   

 

 

 

See accompanying notes to consolidated financial statements.

 

F-7


Table of Contents

3D Systems Corporation

Notes to Consolidated Financial Statements

Note 1    Basis of Presentation

The consolidated financial statements include the accounts of 3D Systems Corporation and all majority-owned subsidiaries (the “Company”). All significant intercompany accounts and transactions have been eliminated in consolidation. The Company’s annual reporting period is the calendar year.

The consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States (“GAAP”). Certain prior period amounts have been reclassified to conform to the current year presentation.

The preparation of financial statements in accordance with GAAP requires management to make estimates and assumptions that affect the amounts reported in the financial statements. Actual results may differ from these estimates and assumptions.

The Company’s Board of Directors approved a two-for-one stock split, affected in the form of a 100% stock dividend, which was paid on May 18, 2011 to stockholders of record at the close of business on May 9, 2011. The Company’s stockholders received one additional share of common stock for each share of common stock owned. This did not change the proportionate interest that a stockholder maintained in the Company. All shares and per share amounts set forth in the report, including earnings per share and the weighted average number of shares outstanding for basic and diluted earnings per share for each respective period have been adjusted to reflect the two-for-one stock split.

All amounts presented in the accompanying footnotes are presented in thousands, except for per share information.

The Company has evaluated subsequent events from the date of the consolidated balance sheet through the date of the filing of this Form 10-K. During this period, the Company closed the acquisition of Z Corporation and Vidar Systems. See Note 25 for a description of subsequent events.

Note 2    Significant Accounting Policies

Use of Estimates

The consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue and expenses and related disclosure of contingent assets and liabilities. On an ongoing basis, the Company evaluates its estimates, including, among others, those related to the allowance for doubtful accounts, income taxes, inventory reserves, goodwill, other intangible assets, contingencies and revenue recognition. The Company bases its estimates on historical experience and on various other assumptions that are believed to be reasonable, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates.

Revenue Recognition

Revenue from the sale of printers and related products and print materials is recognized upon shipment or when services are performed, provided that persuasive evidence of a sales arrangement exists, both title and risk of loss have passed to the customer and collection is reasonably assured. Persuasive evidence of a sales arrangement exists upon execution of a written sales agreement or signed purchase order that constitutes a fixed and legally binding commitment between the Company and the buyer. In instances where sales are made to an authorized reseller, the same criteria cited above are applied to determine the recognition of revenue. The reseller’s creditworthiness is evaluated prior to such sale. The reseller takes ownership of the related printers, products or print materials and payment is not dependent upon the reseller’s sale to an end user.

 

F-8


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The Company enters into sales arrangements that may provide for multiple deliverables to a customer. Sales of printers may include equipment, print materials, a software license, a warranty on the equipment, training and installation. The Company identifies all goods and/or services that are to be delivered separately under a sales arrangement and allocates revenue to each deliverable based on relative fair values. Fair values are generally established based on the prices charged when sold separately by the Company. In general, revenues are separated between printers and other products, print materials, training services, maintenance services and installation services. The allocated revenue for each deliverable is then recognized ratably based on relative fair values of the components of the sale, consistent within the scope of Financial Accounting Standards Board (“FASB”) Accounting Standards Update (“ASU”) 2009-13. Revenue from training, installation and non-contract maintenance services is recognized at the time of performance. The Company also evaluates the impact of undelivered items on the functionality of delivered items for each sales transaction and, where appropriate, defers revenue on delivered items when that functionality has been affected. Functionality is determined to be met if the delivered products or services represent a separate earnings process.

The Company provides end-users with maintenance under a warranty agreement for up to one year and defers a portion of the revenue from the related printer sale at the time of sale based on the relative fair value of those services. After the initial warranty period, the Company offers these customers optional maintenance contracts. Deferred maintenance revenue is recognized ratably, on a straight-line basis, over the period of the contract.

On-demand printed parts sales are included within services revenue and revenue is recognized upon shipment or delivery of the parts, based on the terms of the sales arrangement.

The Company sells equipment with embedded software to its customers. The embedded software is not sold separately, it is not a significant focus of the marketing effort and the Company does not provide post-contract customer support specific to the software or incur significant costs that are within the scope of the FASB Accounting Standards Codification (“ASC”) 985, “Software”. Additionally, the functionality that the software provides is marketed as part of the overall product. The software embedded in the equipment is incidental to the equipment as a whole such that ASC 985 is not applicable. Sales of these products are recognized in accordance with ASC 605.25, “Multiple-Element Arrangements.”

Shipping and handling costs billed to customers for equipment sales and sales of print materials are included in product revenue in the consolidated statements of income and other comprehensive income. Costs incurred by the Company associated with shipping and handling are included in product cost of sales in the consolidated statements of income and other comprehensive income.

Credit is extended, and creditworthiness is determined, based on an evaluation of each customer’s financial condition. New customers are generally required to complete a credit application and provide references and bank information to facilitate an analysis of creditworthiness. Customers with a favorable profile may receive credit terms that differ from the Company’s general credit terms. Creditworthiness is considered, among other things, in evaluating the Company’s relationship with customers with past due balances.

The Company’s terms of sale generally require payment within 30 to 60 days after shipment of a product, although the Company also recognizes that longer payment periods are customary in some countries where it transacts business. To reduce credit risk in connection with printer sales, the Company may, depending upon the circumstances, require significant deposits prior to shipment and may retain a security interest in a system sold until fully paid. In some circumstances, the Company may require payment in full for its products prior to shipment and may require international customers to furnish letters of credit. For maintenance services, the Company either bills customers on a time-and-materials basis or sells customers service agreements that are recorded as deferred revenue and provide for payment in advance on either an annual or other periodic basis.

 

F-9


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Cash and Cash Equivalents

Investments with original maturities of three months or less at the date of purchase are considered to be cash equivalents. The Company’s policy is to invest cash in excess of short-term operating and debt-service requirements in such cash equivalents. These instruments are stated at cost, which approximates market value because of the short maturity of the instruments. The Company places its cash with high quality financial institutions and believes its risk of loss is limited; however, at times, account balances may exceed international and U.S. federally insured limits.

Allowance for Doubtful Accounts

The Company’s estimate of the allowance for doubtful accounts related to trade receivables is based on two methods. The amounts calculated from each of these methods are combined to determine the total amount reserved.

First, the Company evaluates specific accounts for which it has information that the customer may be unable to meet its financial obligations (for example, bankruptcy). In these cases, the Company uses its judgment, based on the available facts and circumstances, and records a specific reserve for that customer against amounts due to reduce the outstanding receivable balance to the amount that is expected to be collected. These specific reserves are re-evaluated and adjusted as additional information is received that impacts the amount reserved.

Second, a reserve is established for all customers based on percentages applied to aging categories. These percentages are based on historical collection and write-off experience. If circumstances change (for example, the Company experiences higher-than-expected defaults or an unexpected adverse change in a customer’s financial condition), estimates of the recoverability of amounts due to the Company could be reduced. Similarly, if the Company experiences lower-than-expected defaults or customer financial condition improves, estimates of the recoverability of amounts due the Company could be increased.

The Company also provides an allowance account for returns and discounts. This allowance is evaluated on a specific account basis. In addition, the Company provides a general reserve for returns from customers that have not been specifically identified based on historical experience.

The Company’s estimate of the allowance for doubtful accounts for financing receivables is determined by evaluating specific accounts for which the borrower is past due more than 90 days, or for which it has information that the borrower may be unable to meet its financial obligations (for example, bankruptcy). In these cases, the Company uses its judgment, based on the available facts and circumstances, and records a specific reserve for that borrower against amounts due to reduce the outstanding receivable balance to the amount that is expected to be collected. If there are any specific reserves, they are re-evaluated and adjusted as additional information is received that impacts the amount reserved.

Inventories

Inventories are stated at the lower of cost or net realizable market value, cost being determined using the first-in, first-out method. Reserves for slow-moving and obsolete inventories are provided based on historical experience and current product demand. The Company evaluates the adequacy of these reserves quarterly.

Property and Equipment

Property and equipment are carried at cost and depreciated on a straight-line basis over the estimated useful lives of the related assets, generally three to thirty years. Leasehold improvements are amortized on a straight-line basis over the shorter of (i) their estimated useful lives and (ii) the estimated or contractual lives of the leases. Realized gains and losses are recognized upon disposal or retirement of the related assets and are reflected in results of operations. Charges for repairs and maintenance are expensed as incurred.

 

F-10


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Goodwill and Intangible Assets

The annual impairment testing required by ASC 350, “Intangibles — Goodwill and Other” requires the Company to use judgment and could require the Company to write down the carrying value of its goodwill and other intangible assets in future periods. The Company allocated goodwill to identifiable geographic reporting units, which are tested for impairment using a two-step process detailed in that statement. See Note 7 to the consolidated financial statements. The first step requires comparing the fair value of each reporting unit with the carrying amount, including goodwill. If that fair value exceeds the carrying amount, the second step of the process is not required to be performed, and no impairment charge is required to be recorded. If that fair value does not exceed that carrying amount, the Company must perform the second step, which requires an allocation of the fair value of the reporting unit to all assets and liabilities of that unit as if the reporting unit had been acquired in a purchase business combination and the fair value of the reporting unit was the purchase price. The goodwill resulting from that purchase price allocation is then compared to the carrying amount with any excess recorded as an impairment charge.

Goodwill set forth on the Consolidated Balance Sheet as of December 31, 2011 arose from acquisitions carried out in 2011, 2010 and 2009 and in years prior to December 31, 2007. Goodwill arising from acquisitions prior to 2007 was allocated to geographic reporting units based on the percentage of SLS® printers then installed by geographic area. Goodwill arising from acquisitions in 2009, 2010 and 2011 was allocated to geographic reporting units based on geographic dispersion of the acquired companies’ sales at the time of their acquisition.

The Company is required to perform a valuation of each of its three geographic reporting units annually, or upon significant changes in the Company’s business environment. The Company conducted its annual impairment analysis in the fourth quarter of 2011. To determine the fair value of each reporting unit the Company utilized discounted cash flows, using five years of projected unleveraged free cash flows and terminal EBITDA earnings multiples. The discount rates used for the analysis reflected a weighted average cost of capital based on industry and capital structure adjusted for equity risk premiums and size risk premiums based on market capitalization. The discounted cash flow valuation uses projections of future cash flows and includes assumptions concerning future operating performance and economic conditions and may differ from actual future cash flows. The Company also considered the current trading multiples of comparable publicly-traded companies and the historical pricing multiples for comparable merger and acquisition transactions that have occurred in the industry. The control premium that a third party would be willing to pay to obtain a controlling interest in the Company was considered when determining fair value. Under each fair value measurement methodology considered, the fair value of each reporting unit exceeded its carrying value; accordingly, no goodwill impairment adjustments were recorded. In addition, factors such as the performance of competitors were also considered. The Company concluded that there was a reasonable basis for the excess of the estimated fair value of the geographic reporting units over its market capitalization.

The estimated fair value of the three geographic reporting units incorporated judgment and the use of estimates by management. Potential factors requiring assessment include the relationship between our market capitalization and our book value, variance in results of operations from projections, and additional acquisition transactions in the industry that reflect a lower control premium. Any of these factors may cause management to re-evaluate goodwill during any quarter throughout the year. If an impairment charge were to be taken for goodwill it would be a non-cash charge and would not impact the Company’s cash position or cash flows; however, such a charge could have a material impact to equity and the statement of income and comprehensive income.

There was no goodwill impairment for the years ended December 31, 2011, 2010 or 2009.

Determining the fair value of a reporting unit, intangible asset or a long-lived asset is judgmental and involves the use of significant estimates and assumptions. The Company bases its fair value estimates on assumptions that it believes are reasonable, but are uncertain and subject to changes in market conditions.

 

F-11


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Licenses, Patent Costs and Other Long-Lived Assets

Licenses, patent costs and other long-lived assets include costs incurred to perfect license or patent rights under applicable domestic and foreign laws and the amount incurred to acquire existing licenses and patents. Licenses and patent costs are amortized on a straight-line basis over their estimated useful lives, which are approximately seven to twenty years. Amortization expense is included in cost of sales, research and development expenses and selling, general and administrative expenses, depending upon the nature and use of the technology.

The Company evaluates long-lived assets other than goodwill for impairment whenever events or changes in circumstances indicate that the carrying value of an asset may not be recoverable. If the estimated future cash flows (undiscounted and without interest charges) from the use of the asset are less than its carrying value, a write-down would be recorded to reduce the related asset to its estimated fair value.

No impairment loss was recorded for the periods presented.

Capitalized Software Costs

Certain software development and production costs are capitalized when the related product reaches technological feasibility. Software development costs capitalized in 2011 were $7,863 and were $1,208 in 2010. There were no software development costs capitalized in 2009. Capitalized software costs include internally developed software and certain costs that relate to developed software that the Company acquired through acquisition of businesses. Amortization of software development costs begins when the related products are available for use in related printers. Amortization expense, included in cost of sales, amounted to $1,046, $159 and $141 for 2011, 2010 and 2009, respectively, based on the straight-line method using an estimated useful life of one year. Net capitalized software costs aggregated $7,864, $1,048 and $0 at December 31, 2011, 2010 and 2009, respectively, and are included in intangible assets in the accompanying consolidated balance sheets.

Contingencies

The Company follows the provisions of ASC 450, “Contingencies,” which requires that an estimated loss from a loss contingency be accrued by a charge to income if it is both probable that an asset has been impaired or that a liability has been incurred and that the amount of the loss can be reasonably estimated.

Foreign Currency Translation

The Company transacts business globally and is subject to risks associated with fluctuating foreign exchange rates. Approximately 50% of the Company’s consolidated revenue is derived from sales outside the U.S. This revenue is generated primarily from sales subsidiaries operating outside the U.S. in their respective countries and surrounding geographic areas. This revenue is primarily denominated in each subsidiary’s local functional currency, although certain sales are denominated in other currencies, including U.S. Dollars, the Euro or the Japanese Yen. These subsidiaries incur most of their expenses (other than intercompany expenses) in their local functional currencies. These currencies include Australian Dollars, British Pounds, Euros, Japanese Yen and Swiss Francs.

The geographic areas outside the U.S. in which the Company operates are generally not considered to be highly inflationary. Nonetheless, these foreign operations are sensitive to fluctuations in currency exchange rates arising from, among other things, certain intercompany transactions that are generally denominated in U.S. Dollars rather than their respective functional currencies. The Company’s operating results, assets and liabilities are subject to the effect of foreign currency translation when the operating results and the assets and liabilities of the Company’s foreign subsidiaries are translated into U.S. Dollars in the Company’s consolidated financial statements. The assets and liabilities of the Company’s foreign subsidiaries are translated from their respective functional currencies into U.S. Dollars based on the translation rate in effect at the end of the related reporting period.

 

F-12


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The operating results of the Company’s foreign subsidiaries are translated to U.S. Dollars based on the average conversion rate for the related period. Gains and losses resulting from these conversions are recorded in accumulated other comprehensive income in the consolidated balance sheets.

Gains and losses resulting from foreign currency transactions (transactions denominated in a currency other than the functional currency of the Company or a subsidiary) are included in the consolidated statements of income and other comprehensive income, except for intercompany receivables and payables for which settlement is not planned or anticipated in the foreseeable future, which are included as a component of accumulated other comprehensive income in the consolidated balance sheets.

Derivative Financial Instruments

The Company is exposed to market risk from changes in interest rates and foreign currency exchange rates and commodity prices, which may adversely affect its results of operations and financial condition. The Company seeks to minimize these risks through regular operating and financing activities and, when the Company considers it to be appropriate, through the use of derivative financial instruments.

The Company does not purchase, hold or sell derivative financial instruments for trading or speculative purposes. The Company has elected not to prepare and maintain the documentation to qualify for hedge accounting treatment under ASC 815, “Derivatives and Hedging,” and therefore, all gains and losses (realized or unrealized) related to derivative instruments are recognized in interest and other income (expense), net in the consolidated statements of income and other comprehensive income and depending on the fair value at the end of the reporting period, derivatives are recorded either in prepaid and other current assets or in accrued liabilities in the consolidated balance sheets.

The Company and its subsidiaries conduct business in various countries using both their functional currencies and other currencies to effect cross border transactions. As a result, they are subject to the risk that fluctuations in foreign exchange rates between the dates that those transactions are entered into and their respective settlement dates will result in a foreign exchange gain or loss. When practicable, the Company endeavors to match assets and liabilities in the same currency on its U.S. balance sheet and those of its subsidiaries in order to reduce these risks. The Company, when it considers it to be appropriate, enters into foreign currency contracts to hedge the exposures arising from those transactions. The total impact of foreign currency related items on the consolidated statements of income and other comprehensive income was a net loss of $118 for 2011, a net loss of $319 for 2010 and a net loss of $104 for 2009.

The Company is exposed to credit risk if the counterparties to such transactions are unable to perform their obligations. However, the Company seeks to minimize such risk by entering into transactions with counterparties that are believed to be creditworthy financial institutions.

The 5.50% senior convertible notes provide the noteholders with certain rights that the Company considers to be embedded derivatives. Embedded derivatives could be required to be bifurcated and accounted for separately from the underlying notes. The Company evaluated the embedded derivatives and determined they were not required to be bifurcated.

Research and Development Costs

Research and development costs are expensed as incurred.

Earnings per Share

Basic net income per share is computed by dividing net income available to common stockholders by the weighted average number of shares of common stock outstanding during the period. Diluted net income per share is computed by dividing net income, as adjusted for the assumed issuance of all dilutive shares, by the weighted

 

F-13


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

average number of shares of common stock outstanding plus the number of additional common shares that would have been outstanding if all dilutive common shares issuable upon exercise of outstanding stock options or conversion of convertible securities had been issued. Common shares related to stock options are excluded from the computation when their effect is anti-dilutive, that is, when their inclusion would increase the Company’s net income per share or reduce its net loss per share. The average outstanding diluted shares calculation also excludes shares that may be issued upon conversion of the outstanding senior convertible notes because their conversion price exceeded the market price of the shares at December 31, 2011.

Advertising Costs

Advertising costs are expensed as incurred. Advertising expenses were $1,561, $816 and $523 for the years ended December 31, 2011, 2010 and 2009, respectively.

Pension costs

The Company sponsors a retirement benefit for one of its non-U.S. subsidiaries in the form of a defined benefit pension plan. Accounting standards require the cost of providing this pension benefit be measured on an actuarial basis. Actuarial gains and losses resulting from both normal year-to-year changes in valuation assumptions and differences from actual experience are deferred and amortized. The application of these accounting standards requires management to make assumptions and judgments that can significantly affect these measurements. Critical assumptions made by management in performing these actuarial valuations include the selection of the discount rate to determine the present value of the pension obligations that affects the amount of pension expense recorded in any given period. Changes in the discount rate could have a material effect on the Company’s reported pension obligations and related pension expense. See Note 16 to the consolidated financial statements.

Equity Compensation Plans

The Company maintains stock-based compensation plans that are described more fully in Note 14 to the consolidated financial statements. Under the fair value recognition provisions of ASC 718, “Compensation — Stock Compensation,” stock-based compensation is estimated at the grant date based on the fair value of the awards expected to vest and recognized as expense ratably over the requisite service period of the award.

Income Taxes

The Company and its domestic subsidiaries file a consolidated U.S. federal income tax return. The Company’s non-U.S. subsidiaries file income tax returns in their respective jurisdictions. The Company provides for income taxes on those portions of its foreign subsidiaries’ accumulated earnings that the Company believes are not reinvested permanently in their business.

Income taxes are accounted for under the asset and liability method. Deferred income tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and tax benefit carryforwards. Deferred income tax liabilities and assets at the end of each period are determined using enacted tax rates.

The Company provides a valuation allowance for those jurisdictions in which the expiration date of tax benefit carryforwards or projected taxable earnings leads the Company to conclude that it is not likely that it will be able to realize the tax benefit of those carryforwards.

During the second quarter of 2011, based upon the Company’s recent results of operations and its expected profitability in the future, the Company concluded that it is more likely than not that a portion of its U.S. net deferred tax assets will be realized.

 

F-14


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The Company applies ASC 740 to determine the impact of an uncertain tax position on the income tax returns. In accordance with ASC 740, this impact must be recognized at the largest amount that is more likely than not to be required to be recognized upon audit by the relevant taxing authority.

The Company includes interest and penalties accrued in the consolidated financial statements as a component of income tax expense.

See Note 21 to the consolidated financial statements.

Recent Accounting Pronouncements

Accounting Standards Implemented in 2011

In October 2009, the FASB issued ASU 2009-13, “Multiple-Deliverable Revenue Arrangements — a consensus of the FASB Emerging Issues Task Force,” to provide amendments to the criteria in Subtopic 609-24 of the Codification for separating consideration into multiple-deliverable revenue arrangements. ASU 2009-13 establishes a selling price hierarchy for determining the selling price of each specific deliverable, which includes vendor-specific objective evidence (“VSOE”) if available, third party evidence if VSOE is not available or estimated selling price if neither VSOE nor third party evidence is available. ASU 2009-13 also eliminates the residual method for allocating revenue between the elements of an arrangement and requires that arrangement consideration be allocated at the inception of the arrangement to all deliverables using the relative selling price method, which allocates any discount in the arrangement proportionally to each deliverable on the basis of each deliverable’s selling price. This Update expands the disclosure requirements regarding a vendor’s multiple-deliverable revenue arrangements. ASU 2009-13 is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010, with early adoption permitted. This standard became effective for the Company beginning in January 2011 and impacted the timing of revenue recognition and the allocation of discounts for multiple element sales. ASU 2009-13 requires the discount on a multiple element sale to be allocated ratably, which may accelerate the timing of recognizing revenue on certain elements. As a result, the gross profit margins allocated to each revenue category may have shifted among revenue categories; however, overall gross profit margin was not impacted in the Company’s consolidated financial statements. Adoption resulted in a positive impact on the gross profit margin of printers and other products, which was offset by a negative impact on materials and services gross profit margins.

In October 2009, the FASB issued ASU 2009-14, “Certain Revenue Arrangements That Include Software Elements — a consensus of the FASB Emerging Issues Task Force.” This Update removes tangible products containing software components and nonsoftware components that function together to deliver the tangible product’s essential functionality from the scope of the software revenue guidance in Subtopic 985-605 of the Codification. Additionally, ASU 2009-14 provides guidance on how a vendor should allocate arrangement consideration to deliverables in an arrangement that includes both tangible products and software that is not essential to the product’s functionality. ASU 2009-14 requires the same expanded disclosures that are included within ASU 2009-13. ASU 2009-14 is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010, with early adoption permitted. A company is required to adopt the amendments in both ASU 2009-13 and ASU 2009-14 in the same period using the same transition method. This update may allow some companies to recognize revenue on transactions that involve multiple deliverables earlier than under previous standards. This standard became effective for the Company beginning in January 2011 and did not have a significant impact on the Company’s consolidated financial statements.

In December 2010, the FASB issued ASU 2010-29, “Disclosure of Supplementary Pro Forma Information for Business Combinations.” This Update amends and clarifies the acquisition date to be used for reporting pro forma financial disclosures when comparative financial statements are presented. In addition it requires a description of the nature of and amount of any material, non-recurring pro forma adjustments directly attributable to the business

 

F-15


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

combination. ASU 2010-29 is effective prospectively for business combinations for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2010, with early adoption permitted. The standard became effective for the Company in January 2011 and did not have an impact on the Company’s financial position or results of operations as it only amends required disclosures.

In June 2011, the FASB issued ASU 2011-05, “Presentation of Comprehensive Income.” ASU 2011-05 eliminates the current option to report other comprehensive income and its components in the statement of changes in equity and requires that all non-owner changes in stockholders’ equity be presented either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In addition, it requires entities to present on the face of the financial statements reclassification adjustments for items that are reclassified from other comprehensive income to net income in the statements where the components of net income and the components of other comprehensive income are presented. ASU 2011-05 will become effective for public entities for fiscal years, and interim periods within those years, beginning after December 15, 2011, with early adoption permitted. The standard was adopted by the Company in January 2011. Since this standard affects disclosure requirements only, its adoption did not have a significant impact on the Company’s consolidated financial statements.

New Accounting Standards to be Implemented

In May 2011, the FASB issued ASU 2011-04, “Amendments to Achieve Common Fair Value Measurement and Disclosure Requirements in U.S. GAAP and International Financial Reporting Standards (“IFRS”).” ASU 2011-04 explains how to measure fair value and intends to improve the comparability of fair value measurements presented and disclosed in financial statements prepared in accordance with U.S. GAAP and IFRS. ASU 2011-04 will become effective prospectively for interim and annual reporting periods beginning on or after December 15, 2011; early adoption is not permitted for public entities. The standard will become effective for the Company in January 2012. The Company is currently evaluating the impact of ASU 2011-04 on its consolidated financial statements.

In September 2011, the FASB issued ASU 2011-8, “Intangibles — Goodwill and Other (Topic 350).” ASU 2011-8 is intended to simplify the testing of goodwill for impairment by permitting an entity to first assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount as a basis for determining whether it is necessary to perform the two-step goodwill impairment test described in Topic 350. ASU 2011-8 will become effective for fiscal years beginning after December 15, 2011, with early adoption permitted in limited circumstances. The standard will become effective for the Company in January 2012 and the adoption is not expected to have a significant impact on the Company’s consolidated financial statements.

In December 2011, the FASB issued ASU 2011-12, Comprehensive Income (Topic 220): Deferral of the Effective Date for Amendments to the Presentation of Reclassification of Items Out of Accumulated Other Comprehensive Income in ASU 2011-5. ASU 2011-12 defers the effective date pertaining to reclassification adjustments out of accumulated other comprehensive income in ASU 2011-5. Entities should continue to report reclassification adjustments out of accumulated other comprehensive income consistent with the presentation requirements before ASU 2011-5. All other requirements in ASU 2011-5 are not affected by this Update, including the requirement to report comprehensive income either in a single continuous financial statement or in two separate but consecutive financial statements. ASU 2011-12 will become effective for public entities for fiscal years, and interim periods within those years, beginning after December 15, 2011, with early adoption permitted. The standard will become effective for the Company in January 2012. Since this standard affects disclosure requirements only, its adoption will not have a significant impact on the Company’s consolidated financial statements.

No other new accounting pronouncements issued or effective during 2011 have had or are expected to have a significant impact on the Company’s consolidated financial statements.

 

F-16


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Note 3    Acquisitions

Fiscal Year 2011 Acquisitions

On January 5, 2011, the Company acquired the assets of National RP Support, Inc. (“NRPS”). NRPS is a provider of customer support services and a factory-authorized source of parts, maintenance, and other services for 3D Systems’ equipment. NRPS operations have been integrated into the Company and included in services revenue. The fair value of the consideration paid for this acquisition was $5,550, all of which was paid in cash, and was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date, and is included in the table below which summarizes 2011 acquisitions.

On February 22, 2011, the Company acquired the shares of Quickparts.com, Inc. (“Quickparts”). Quickparts is a custom parts services company. Quickparts operations have been integrated into the Company and included in services revenue. The fair value of the consideration paid for this acquisition, net of cash acquired, was $22,775, all of which was paid in cash, and was allocated to the assets purchased and liabilities assumed, based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions.

On March 8, 2011, the Company acquired the assets of Accelerated Technologies, Inc (“ATI”). ATI is a custom parts services company. ATI operations have been integrated into the Company and included in services revenue. The fair value of the consideration paid for this acquisition, net of cash acquired, was $1,000, all of which was paid in cash, and was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date, and is included in the table below which summarizes 2011 acquisitions.

On April 13, 2011, the Company acquired the assets of Print3D Corporation (“Print3D”), a startup company that develops custom parts services for Computer Aided Design (“CAD”) users through advanced desktop tools that integrate directly into their design environment. Print3D operations have been integrated into the Company and future revenue will be included in services revenue. The fair value of the consideration paid for this acquisition, net of cash acquired, was $1,250 and was allocated to the assets purchased based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions. Of the consideration, $1,000 was paid in cash and $250 was paid in shares of the Company’s common stock. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

Subject to the terms and conditions of the acquisition agreement, the sellers have the right to earn an additional amount of up to approximately $8,925, pursuant to an earnout formula set forth in the acquisition agreement, for a period of thirty-six months, which commenced on June 1, 2011. As of December 31, 2011, an accrued liability was not recorded for the earnout.

On April 14, 2011, the Company acquired the assets of Sycode, a software development company based in India. Sycode specializes in providing plug-ins for all commercially available CAD packages. Sycode operations have been integrated into the Company and future revenue will be included in printers and other products revenue. The fair value of the consideration paid for this acquisition, net of cash acquired, was $500, all of which was paid in cash, and was allocated to the assets purchased based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions.

On May 6, 2011, the Company acquired the assets of The3dStudio.com, Inc (“3dStudio”), a provider of 3D and 2D digital media libraries, offering resources and expert support through a vibrant online marketplace exchange for consumers and professionals. 3dStudio operations have been integrated into the Company and included in services revenue. The fair value of the consideration paid for this acquisition, net of cash acquired, was $2,500 and was allocated to the assets purchased and liabilities assumed based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions. Of the consideration, $1,875 was paid in cash and $625 was paid in shares of the Company’s common stock. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

 

F-17


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

On May 12, 2011, the Company acquired the shares of Freedom Of Creation (“FOC”), based in the Netherlands, a provider of printable collections of innovative and practical 3D content, including products commercialized by fashion and design labels. FOC operations have been integrated into the Company and included in services revenue. The fair value of the consideration paid for this acquisition, net of cash acquired, was $2,286 and was allocated to the assets purchased and liabilities assumed based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions. Of the consideration, $1,136 was paid in cash and $1,150 was paid in shares of the Company’s common stock. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

On July 19, 2011, the Company acquired the assets of Alibre Inc. (“Alibre”), a provider of design productivity solutions. Alibre’s operations have been integrated into the Company and future revenue will be included in printers and other products and services revenue. The fair value of the consideration paid for this acquisition was $3,800, all of which was paid in cash and was allocated to the assets purchased and liabilities assumed, based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions.

On August 9, 2011, the Company acquired certain assets of Content Media, Inc. related to the Botmill printer (“Botmill”). Botmill is a manufacturer of desktop 3D printers, kits, materials and accessories. Botmill’s operations have been integrated into the Company and future revenue will be included in printers and other products revenue. The fair value of the consideration paid for this acquisition was $17, all of which was paid in cash, and was allocated to the assets purchased based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions.

Subject to the terms and conditions of the acquisition agreement, the sellers have the right to earn an additional amount up to a maximum of $1,000, pursuant to an earn-out formula set forth in the acquisition agreement, for a period of three years, which commenced on September 1, 2011. As of December 31, 2011, no accrued liability was recorded for the earnout. The Company will re-evaluate the earnout in future periods to determine if a liability is to be accrued.

On September 20, 2011, the Company acquired the shares of Formero Pty, Ltd. and its wholly-owned subsidiary XYZ Innovation (“Formero”). Formero, based in Australia, with an additional office in China, is a provider of on-demand custom parts services and a distributor of 3D printers. Formero’s operations have been integrated into the Company and included in services revenue and printers and other products revenue. The fair value of the consideration paid for this acquisition, net of cash acquired, was $5,967 and was allocated to the assets purchased and liabilities assumed, based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions. Of the consideration, $4,967 was paid in cash and $1,000 was paid in shares of the Company’s common stock. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

Subject to the terms and conditions of the Formero acquisition agreement, the sellers have the right to earn an additional amount of up to a maximum of approximately $2,012, based on the exchange rate at the date of acquisition, pursuant to an earn-out formula set forth in the acquisition agreement, for a period of three years, which commenced on October 1, 2011. As of December 31, 2011, an accrued liability of approximately $1,862, based on the exchange rate at the date of acquisition, was recorded for the earnout. The earnout was determined to be acquisition consideration and therefore is reflected as part of goodwill.

On October 4, 2011, the Company acquired the shares of Kemo Modelmakerij B.V. (“Kemo”). Kemo, based in the Netherlands, is a provider of on-demand custom parts services. Kemo’s operations have been integrated into the Company and revenue is recorded in services revenue. The fair value of the consideration paid for this acquisition, net of cash acquired, was approximately $3,719, based on the exchange rate at the date of acquisition, all of which was paid in cash, and was allocated to the assets purchased and liabilities assumed based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions.

 

F-18


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

On November 1, 2011, the Company acquired the RenShape® stereolithography print materials and Digitalis® rapid manufacturing 3D printer product line from the Advanced Materials Division of Huntsman Corporation (“Huntsman”). Huntsman’s print materials operations have been integrated into the Company and future revenue will be included in printers and other products revenue. The 3D printer product line is currently being evaluated by the Company to determine commercialization of the product or integration into the Company’s ongoing research and development. The fair value of the consideration paid for this acquisition was $41,286 all of which was paid in cash, and was allocated to the assets purchased based on the estimated fair values at the date of acquisition, and is included in the table below which summarizes 2011 acquisitions.

Quickparts, the only significant acquisition in 2011, has been recorded in the services category of the Company’s consolidated financial statements since the date of acquisition. Revenue for Quickparts for 2011 was $24,127 and operating income was $2,799.

If the 2011 acquisition of Quickparts had been included in the Company’s results of operations since January 1, 2010, the consolidated revenue for 2011 and 2010 would have been $233,612 and $185,055, respectively. Net income would have been $34,144 and $20,102 for 2011 and 2010. The unaudited pro forma results provided reflect certain adjustments related to the acquisitions, such as amortization expense on intangible assets acquired, and do not include any cost synergies or other effects of the integration of the acquisition. These pro forma amounts are not necessarily indicative of the results that would have occurred if the acquisition had been completed at the beginning of 2010, nor are they indicative of the future operating results from the combined companies.

The amounts related to the acquisition of these businesses were allocated to the assets acquired and the liabilities assumed as follows:

 

(in thousands)    December 31,
2011
 

Property and equipment

   $ 3,597   

Intangible assets

     89,881   

Other assets, net of cash acquired and liabilities assumed

     (2,828
  

 

 

 

Net assets acquired

   $ 90,650   
  

 

 

 

Subsequent Acquisitions

On November 21, 2011 the Company entered into an agreement to acquire Z Corporation (“Z Corp”) and Vidar Systems (“Vidar”), located in Burlington, MA and Herndon, VA, respectively, and on January 3, 2012, the Company completed the acquisition of Z Corp and Vidar. Z Corp is a leading provider of personal and professional 3D printers, 3D scanners, and proprietary print materials and services. Vidar is a leading provider of medical film scanners that digitize film for radiology, oncology, mammography and dental applications. The Company is in the process of integrating Z Corp and Vidar. The fair value of the consideration paid for this acquisition was $135,488, net of cash acquired, and will be allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date. Due to the timing of this acquisition, at the time of this filing the Company is in the process of allocating the fair value of assets purchased, liabilities assumed and other intangibles identified as of the acquisition date, with any excess to be recorded as goodwill.

Fiscal 2010 Acquisitions

On February 16, 2010, the Company acquired the assets of Moeller Design and Development, Inc. (“Moeller Design”) in Seattle, Washington. Moeller Design is a provider of premium precision investment casting services and prototyping for aerospace and medical device applications. The Company acquired Moeller Design for its premium parts capabilities and to expand the geographic footprint of its 3Dproparts™ service to the West Coast. Moeller Design has been integrated into the Company’s 3Dproparts™ service. The fair value of

 

F-19


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

the consideration paid for this acquisition was $3,600 and was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date and is included in the table below which summarizes 2010 acquisitions. In addition, there was a bargain purchase gain for $37. Of the $3,600 consideration, $2,600 was paid in cash and $1,000 was paid in shares of the Company’s common stock. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

In connection with the acquisition, the Company entered into a lease agreement with an entity whose managing member is the former owner of Moeller Design, pursuant to which the Company agreed to lease the facilities at which Moeller Design’s operations are conducted. The lease provides for an initial term of five years with renewal options for two successive five-year terms. The lease agreement includes an option for the Company to purchase the facility.

On April 6, 2010, the Company acquired the assets of Design Prototyping Technologies, Inc. (“DPT”) in Syracuse, New York. DPT is a provider of fast turnaround functional parts and prototypes. The Company acquired DPT to enhance its online offerings for its 3Dproparts™ service. DPT has been integrated into the Company’s 3Dproparts™ service. The fair value of the consideration paid for this acquisition was $3,600 and was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date and is included in the table below which summarizes 2010 acquisitions. Of the $3,600 consideration, $3,000 was paid in cash and $600 was paid in shares of the Company’s common stock. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

In connection with the DPT acquisition, the Company entered into a lease agreement with an entity whose managing members are the former owners of DPT, pursuant to which the Company agreed to lease the facilities at which DPT’s operations are conducted. The lease provides for an initial term of approximately two years with renewal options for two-year and one-year successive terms, respectively. The lease agreement includes a right of first refusal with respect to the sale of the building.

On July 7, 2010, the Company acquired the assets of CEP S.A. and its affiliate, Protometal S.A. (collectively “CEP”), rapid prototyping and printed part service providers located in Joué l’Abbé, France. The Company acquired CEP to augment and expand its 3Dproparts™ business in Europe. CEP has been integrated into the Company’s 3Dproparts™ service. The fair value of the consideration paid for this acquisition, net of cash acquired, was $3,502 and was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date and is included in the table below which summarizes 2010 acquisitions. Of the $3,502 consideration, $2,426 was paid in cash and $1,076 was paid in shares of the Company’s common stock. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

In connection with the CEP acquisition, the Company entered into lease agreements, pursuant to which the Company agreed to lease two facilities at which CEP’s operations are conducted. The leases current terms extend until June 30, 2012 and December 14, 2014, respectively, at which points the Company has certain renewal options.

On September 16, 2010, the Company acquired the assets of Express Pattern, Inc. (“Express Pattern”) in Vernon Hills, Illinois. Express Pattern is a provider of rapid prototyping, direct patterns for investment casting and manufacturing services. The Company acquired Express Pattern as part of the Company’s continued expansion of its 3Dproparts™ service. Express Pattern has been integrated into the Company’s 3Dproparts™ service. The fair value of the consideration paid for this acquisition was $1,650 and was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date and is included in the table below which summarizes 2010 acquisitions. Of the $1,650 consideration, $1,400 was paid in cash and $250 was paid in shares of the Company’s common stock. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

 

F-20


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

On October 5, 2010, the Company acquired the shares of Bits From Bytes Limited (“Bits From Bytes”) located near Bristol, England. Bits From Bytes is a producer of personal 3D printers and printer kits. Bits From Bytes has been integrated into the Company. Based on the exchange rate at the date of acquisition, the fair value of the consideration paid for this acquisition, net of cash acquired, was $2,185, of which $1,592 was paid in cash and $593 was paid in shares of the Company’s common stock, all of which was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date and is included in the table below which summarizes 2010 acquisitions. These shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

Subject to the terms and conditions of the acquisition agreement, the sellers have the right to deferred payments of approximately $1,420, based on the exchange rate at December 31, 2011, pursuant to details set forth in the acquisition agreement for a period of three years which commenced December 31, 2011. See Note 18 to the consolidated financial statements.

On October 12, 2010, the Company acquired the shares of Provel, S.r.l. (“Provel”). Provel is an Italian provider of rapid protyping, tooling and printed parts services located near Turin, Italy. The Company acquired Provel as part of its continued expansion of its 3Dproparts™ service in Europe. Provel has been integrated into the Company’s 3Dproparts™ service. Based on the exchange rate at the date of acquisition, the fair value of the consideration paid for this acquisition, net of cash acquired, was $11,955, of which $6,848 was paid in cash and $1,387 was paid in shares at closing, with a second installment of $3,720 paid October 2011, all of which was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the acquisition date and is included in the table below which summarizes 2010 acquisitions. The shares were issued in a private transaction exempt from registration under the Securities Act of 1933.

Subject to the terms and conditions of the acquisition agreement, the sellers have the right to earn an additional amount up to approximately $1,392, based on the exchange rate at the date of acquisition, pursuant to an earnout formula set forth in the acquisition agreement, for a period of twelve months, which commenced on February 1, 2011. The fair value of consideration was allocated to the assets purchased and liabilities assumed based on their estimated fair values as of the date of acquisition. As of December 31, 2011, no accrued liability was recorded for the earnout.

Provel S.r.l., the only significant acquisition in 2010, has been recorded in the Services category of the Company’s consolidated financial statements since the date of acquisition. Revenue for Provel for 2010 was $1,117 and operating income was $257.

If Provel had been included in the Company’s results of operations since January 1, 2009, the consolidated revenue for 2010 and 2009 would have been $163,965 and $119,005, respectively. Net income would have been $20,056 and $1,214 for 2010 and 2009. The unaudited pro forma results provided reflect certain adjustments related to the acquisitions, such as amortization expense on intangible assets acquired, and do not include any cost synergies or other effects of the integration of the acquisition. These pro forma amounts are not necessarily indicative of the results that would have occurred if the acquisition had been completed at the beginning of 2009, nor are they indicative of the future operating results from the combined companies.

All the other acquisitions the Company completed in 2010 were not material, either individually or in aggregate; therefore, no pro forma financial information is provided for these acquisitions. Moeller Design and Development, Inc., Design Prototyping Technologies, Inc, CEP S.A., Protometal S.A. and Express Pattern, Inc. have been recorded in the Services category in the Company’s consolidated financial statements since the date of acquisition. Bits From Bytes Limited has been recorded in the Printers and other products category in the Company’s consolidated financial statements since the period of acquisition.

 

F-21


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The amounts related to the acquisition of these businesses were allocated to the assets acquired and the liabilities assumed as follows:

 

(in thousands)    December 31,
2010
 

Property and equipment

   $ 5,523   

Intangible assets

     25,932   

Other assets, net of cash acquired and liabilities assumed

     (4,926

Gain from bargain purchase

     (37
  

 

 

 

Net assets acquired

   $ 26,492   
  

 

 

 

Note 4    Inventories

Components of inventories, net at December 31, 2011 and 2010 are as follows:

 

(in thousands)    2011     2010  

Raw materials

   $ 8,797      $ 6,742   

Work in process

     606        195   

Finished goods

     18,422        19,079   
  

 

 

   

 

 

 

Total cost

     27,825        26,016   

Less: reserves

     (2,542     (2,205
  

 

 

   

 

 

 

Inventories, net

   $ 25,283      $ 23,811   
  

 

 

   

 

 

 

Note 5    Property and Equipment

Property and equipment at December 31, 2011 and 2010 are summarized as follows:

 

(in thousands)    2011     2010     Useful Life
(in years)
 

Land

   $ 541      $ 152        N/A   

Building

     9,204        9,574        25   

Machinery and equipment

     36,773        30,460        3-7   

Capitalized software — ERP

     3,141        3,143        5   

Office furniture and equipment

     3,138        3,051        5   

Leasehold improvements

     5,996        5,504        Life of Lease (1) 

Rental equipment

     56        506        5   

Construction in progress

     980        980        N/A   
  

 

 

   

 

 

   

Total property and equipment

     59,829        53,370     

Less: Accumulated depreciation and amortization

     (30,235     (25,701  
  

 

 

   

 

 

   

Total property and equipment, net

   $ 29,594      $ 27,669     
  

 

 

   

 

 

   

 

(1) 

Leasehold improvements are amortized on a straight-line basis over the shorter of (i) their estimated useful lives and (ii) the estimated or contractual life of the related lease.

Depreciation expense for 2011, 2010 and 2009 was $6,267, $6,118 and $4,882, respectively.

 

F-22


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Capitalized leases related to buildings had a cost of $8,496 at December 31, 2011 and 2010. Capitalized leases related to office furniture and equipment had a cost of $24 at December 31, 2011 and $542 at December 31, 2010.

For the year ended December 31, 2011, the Company recognized software amortization expense of $225 for enterprise resource planning (“ERP”) system capitalization costs compared to $537 for the years ended December 31, 2010 and 2009.

Note 6    Intangible Assets

Intangible assets other than goodwill at December 31, 2011 and December 31, 2010 are as follows:

 

     2011      2010  
(in thousands)    Cost      Accumulated
Amortization
    Net      Cost      Accumulated
Amortization
    Net  

Licenses

   $ 5,875       $ (5,875   $       $ 5,875       $ (5,875   $   

Patent costs

     16,379         (13,846     2,533         16,296         (13,632     2,664   

Acquired technology

     11,015         (10,345     670         11,064         (10,304     760   

Internally developed software

     17,847         (9,983     7,864         9,984         (8,936     1,048   

Customer relationships

     32,974         (1,798     31,176         10,253         (300     9,953   

Non-compete agreements

     8,976         (1,890     7,086         3,875         (840     3,035   

Trade names

     4,651         (180     4,471         883         (68     815   

Other

     1,986         (1,746     240         974         (974       
  

 

 

    

 

 

   

 

 

    

 

 

    

 

 

   

 

 

 

Total

   $ 99,703       $ (45,663   $ 54,040       $ 59,204       $ (40,929   $ 18,275   
  

 

 

    

 

 

   

 

 

    

 

 

    

 

 

   

 

 

 

During 2011, 2010 and 2009, the Company capitalized $336, $302 and $223, respectively, for costs incurred to acquire, develop and extend patents in the United States and various other countries. Amortization of such previously capitalized patent costs was $237 in 2011, $474 in 2010 and $829 in 2009.

At December 31, 2011, the gross acquired technology balance was $11,015. Acquired technology decreased $49 in 2011 from $11,064 in 2010 due to foreign currency exchange effects. The related accumulated amortization increased $41, net of foreign currency exchange impacts.

The Company had $50,837 and $14,851 of other net intangible assets, consisting of internally developed software, non-compete agreements, customer relationships and trade names and other intangibles from acquisitions, as of December 31, 2011 and 2010, respectively. Internally developed software also includes certain software costs that relate to developed software the Company obtained through acquisitions. Acquisition activities during the year ended December 31, 2011 yielded $40,832 of other intangible assets compared to $16,108 in 2010. Amortization expense related to such intangible assets was $4,588, $928 and $175 for the years ended December 31, 2011, 2010 and 2009, respectively. Amortization of these intangible assets is calculated on a straight-line basis over a five year life.

Annual amortization expense for intangible assets is expected to be $7,093 in 2012, $7,004 in 2013, $6,981 in 2014, $6,826 in 2015 and $5,680 in 2016.

 

F-23


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Note 7    Goodwill

The following are the changes in the carrying amount of goodwill by geographic reporting unit:

 

(in thousands)    U.S.      Europe     Asia-
Pacific
     Total  

Balance at January 1, 2010

   $ 19,013       $ 22,787      $ 6,930       $ 48,730   

Effect of foreign currency exchange rates

             415                415   

Goodwill acquired through acquisitions

     934         8,899                9,833   
  

 

 

    

 

 

   

 

 

    

 

 

 

Balance at December 31, 2010

     19,947         32,101        6,930         58,978   

Effect of foreign currency exchange rates

             (638     14         (624

Goodwill acquired through acquisitions

     41,365         3,026        4,906         49,297   
  

 

 

    

 

 

   

 

 

    

 

 

 

Balance at December 31, 2011

   $ 61,312       $ 34,489      $ 11,850       $ 107,651   
  

 

 

    

 

 

   

 

 

    

 

 

 

The effect of foreign currency exchange rates in this table reflects the impact on goodwill of amounts recorded in currencies other than the U.S. Dollar on the financial statements of subsidiaries in these geographic areas resulting from the yearly effect of foreign currency translation between the applicable functional currency and the U.S. Dollar. The remaining goodwill for Europe and the entire amount of goodwill for Asia-Pacific represent amounts allocated in U.S. Dollars from the U.S. to those geographic areas for financial reporting purposes.

Note 8    Employee Benefits

The Company sponsors a Section 401(k) plan (the “Plan”) covering substantially all its eligible U.S. employees. The Plan entitles eligible employees to make contributions to the Plan after meeting certain eligibility requirements. Contributions are limited to the maximum contribution allowances permitted under the Internal Revenue Code. The Company matches 50% of the employee contributions up to a maximum of $3 as set forth in the Plan. The Company may also make discretionary contributions to the Plan, which would be allocable to participants in accordance with the Plan. For the years ended December 31, 2011, 2010 and 2009, the Company expensed $241, $224 and $187, respectively, for matching contributions to the Plan.

The Company also sponsors a Section 401(k) plan covering eligible employees of Quickparts (the “Quickparts Plan”), which was acquired in early 2011. The Quickparts Plan entitles eligible employees to make contributions to the Quickparts Plan after meeting certain eligibility requirements. Contributions are limited to the maximum contribution allowances permitted under the Internal Revenue Code. The Company does not match the employee contributions; therefore, the Company had no expense for matching contributions to the Quickparts Plan.

 

F-24


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Note 9    Accrued and Other Liabilities

Accrued liabilities at December 31, 2011 and 2010 are as follows:

 

(in thousands)    2011      2010  

Compensation and benefits

   $ 7,036       $ 6,786   

Vendor accruals

     1,640         2,259   

Accrued professional fees

     326         451   

Accrued taxes

     3,500         3,102   

Royalties payable

     302         439   

Accrued interest

     950         48   

Contractual obligations due to acquisitions

     1,384         4,356   

Non-contractual obligation to repurchase

             27   

Accrued other

     1,678         501   
  

 

 

    

 

 

 

Total

   $ 16,816       $ 17,969   
  

 

 

    

 

 

 

Other liabilities at December 31, 2011 and 2010 are summarized below:

 

(in thousands)    2011      2010  

Defined benefit pension obligation. See Note 16

   $ 3,884       $ 3,394   

Long-term tax liability

     827         756   

Earnouts and deferred payments related to acquisitions

     1,898         2,660   

Other long-term liabilities

     3,838         3,151   
  

 

 

    

 

 

 

Total

   $ 10,447       $ 9,961   
  

 

 

    

 

 

 

Note 10    Hedging Activities and Financial Instruments

Generally accepted accounting principles require the Company to disclose its estimate of the fair value of material financial instruments, including those recorded as assets or liabilities in its consolidated financial statements. The carrying amounts of current assets and liabilities approximate fair value due to their short-term maturities. Generally, the fair value of a fixed-rate instrument will increase as interest rates fall and decrease as interest rates rise.

The carrying amounts and fair values of the Company’s other financial instruments at December 31, 2011 and 2010 were as follows:

 

     2011      2010  
     Carrying
Amount
     Fair
Value
     Carrying
Amount
     Fair
Value
 

Grand Junction note receivable

   $       1,918       $       1,474       $     1,267       $     1,374   

5.5% convertible senior notes

     131,107         136,837                   

In December 2008, the Company sold its Grand Junction, Colorado facility for $5,500, consisting of $3,500 of cash proceeds (before deducting closing costs) and a zero interest five-year promissory note from the buyer. The Company discounted the note receivable by $1,017, reducing the net gain on the sale to $636. In accordance with ASC 360.20 “Real Estate Sales,” the Company has not recognized this gain on the sale of its Grand Junction facility as of December 31, 2011. The carrying value of the long-term receivable, net of the discount and deferred gain is recorded in “Other assets, net.” None of the gain will be recognized until the earlier of (i) the sale of the property securing the note by the buyer, or (ii) repayment of the promissory note by the buyer.

 

F-25


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The note is secured by (i) a guarantee from the principals of the entity that purchased the facility and (ii) a second deed of trust on the facility.

The fair value of the Grand Junction note receivable was calculated at December 31, 2011 and 2010 by discounting the remaining payments using a discount rate of 13.78% and 14.49%, respectively. This rate was derived by taking the risk-free interest rate for similar maturities and adding an estimated risk premium intended to reflect the credit risk.

In the fourth quarter of 2011, the Company entered into an indenture under which we privately placed $152,000 of 5.50% Senior Convertible Notes due December 15, 2016 with institutional and accredited investors. The estimated fair value of the fixed-rate convertible notes in the table above differ from the amounts reflected on the balance sheet based on the difference between the mandatory redemption value and the market value of the notes. The interest rate used to discount the contractual payments associated with the debentures was 5.88% for 2011.

The foregoing estimates are subjective and involve uncertainties and matters of significant judgment. Changes in assumptions could significantly affect the Company’s estimates.

The Company conducts business in various countries using both the functional currencies of those countries and other currencies to effect cross border transactions. As a result, the Company is subject to the risk that fluctuations in foreign exchange rates between the dates that those transactions are entered into and their respective settlement dates will result in a foreign exchange gain or loss. When practicable, the Company endeavors to match assets and liabilities in the same currency on its balance sheet and those of its subsidiaries in order to reduce these risks. When appropriate, the Company enters into foreign currency contracts to hedge exposures arising from those transactions. The Company has elected not to prepare and maintain the documentation to qualify for hedge accounting treatment under ASC 815, “Derivatives and Hedging,” and therefore, all gains and losses (realized or unrealized) are recognized in “Interest and other expense, net” in the consolidated statements of income and other comprehensive income. Depending on their fair value at the end of the reporting period, derivatives are recorded either in prepaid expenses and other current assets or in accrued liabilities on the consolidated balance sheet.

The total impact of foreign currency related items on the consolidated statements of income and other comprehensive income were losses of $118, $319 and $104 for 2011, 2010 and 2009, respectively.

Note 11    Borrowings

5.5% senior convertible notes and interest expense

In November 2011, the Company completed the private placement of $152,000 of 5.50% senior convertible notes due in December 2016. The net proceeds of these notes were used to pay the purchase price for the Z Corp and Vidar acquisitions and for general corporate purposes. The Company issued these notes under an indenture dated as of November 22, 2011 at a price of 98% of the $152,000 aggregate principal amount. After deducting this original issue discount and commissions provided for on the placement of the notes, the net proceeds of this private placement amounted to $145,366. These notes are senior unsecured obligations and rank equal in right of payment with all the Company’s existing and future senior unsecured indebtedness. They are also senior in right of payment to any subordinated indebtedness that the Company may incur in the future.

In May 2008, the FASB issued guidance contained in ASC Topic 470-20, “Debt with Conversion and Other Options” which applies to all convertible debt instruments that have a “net settlement feature”, which means that such convertible debt instruments, by their terms, may be settled either wholly or partially in cash upon conversion. This topic requires issuers of convertible debt instruments that may be settled wholly or partially in cash upon conversion to separately account for the liability and equity components in a manner reflective of the issuers’ non-convertible debt borrowing rate.

 

F-26


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The company recognized the estimated equity component of the convertible notes of $18,210 in additional paid-in capital. In addition, the company allocated $440 of unamortized debt issuance costs to the equity component and recognized this amount as a reduction to additional paid-in capital. The company also recognized a discount on convertible notes of $3,040, which is being amortized as non-cash interest expense over the life of the notes.

The company also recognized a deferred tax liability of $7,200 as the tax effect of the basis difference between carrying values and tax basis of the convertible notes. The carrying value of this deferred tax liability offset certain net deferred tax assets for determining valuation allowances against those deferred tax assets. See Note 21 to the consolidated financial statements.

At December 31, 2011, the carrying amount of the equity component recognized upon adoption was $17,770. The following table summarizes the principal amounts and related unamortized discount on convertible notes:

 

(in thousands)    2011     2010  

Principal amount of convertible notes

   $ 152,000      $   

Unamortized discount on convertible notes

     (20,893       
  

 

 

   

 

 

 

Net carrying value

   $ 131,107      $   
  

 

 

   

 

 

 

The following table summarizes other information related to the convertible notes:

 

(in years)       

Total amortization period for debt discount

     5 years   

Remaining amortization period for debt discount

     5 years   

Effective interest rates on convertible notes

     9.51

The following table summarizes interest costs recognized on convertible notes:

 

(in thousands)    2011      2010      2009  

Contractual interest coupon

   $ 906       $       $   

Amortization of debt discount

     409                   
  

 

 

    

 

 

    

 

 

 

Total

   $ 1,315       $       $   
  

 

 

    

 

 

    

 

 

 

These notes are convertible into shares of the Company’s Common Stock at an initial conversion rate equivalent to 46.6021 shares of Common Stock per $1 principal amount of notes, which represents an initial conversion rate of approximately $21.46 per share of Common Stock. The conversion rate is subject to adjustment in certain circumstances as more fully set forth in the indenture covering the notes.

If converted, the aggregate principal amount of the notes then outstanding may be settled in cash, shares of common stock, or a combination thereof, at the Company’s election. Subject to the terms of the indenture, holders may convert their notes at any time. The number of shares of common stock the notes are currently convertible into is approximately 7,084. In certain circumstances provided by the indenture, the number of shares of common stock issuable upon conversion of the notes may be increased, and with it the aggregate principal amount of the notes. Unless earlier repurchased, redeemed or converted, the notes will mature on December 15, 2016.

The notes were issued with an effective yield of 5.96% based upon an original issue discount at 98.0%. The net proceeds from the issuance of these Notes, after deducting original issue discount and capitalized issuance costs of $6,634, amounted to $145,366. The capitalized issuance costs are being amortized to interest expense over the life of the notes.

 

F-27


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The notes accrue interest at the rate of 5.50% per year payable in cash semi-annually on June 15 and December 15 of each year, beginning June 15, 2012.

Redemption Features — convertible securities

Upon certain terms and conditions, the Company may elect to satisfy its conversion obligation with respect to the notes by paying cash, in whole or in part, for specified aggregate principal amount of the notes. In the event of certain types of fundamental changes, the Company will increase the conversion rate by a number of additional shares, up to a maximum of 9.031 shares, which equates to a conversion price of approximately $16.83 per share.

Interest Expense

Interest expense totaled $2,090 in 2011, compared to $587 in 2010 and $618 in 2009, while interest income totaled $51 in 2011, compared to $32 in 2010 and $9 in 2009, reflecting the combined effect of the issuance of the senior convertible notes, lower interest rates on investments, higher cash balances and the repayment of the industrial revenue bonds in 2009. For 2011, interest expense related to capital leases and the 5.50% senior convertible notes, while in 2010 and 2009, interest expense related to capital leases.

Note 12    Lease Obligations

The Company leases certain of its facilities and equipment under capitalized leases and other facilities and equipment under non-cancelable operating leases. The leases are generally on a net-rent basis, under which the Company pays taxes, maintenance and insurance. Leases that expire at various dates through 2031 are expected to be renewed or replaced by leases on other properties. Rental expense for the years ended December 31, 2011, 2010 and 2009 aggregated $2,738, $1,977 and $1,707, respectively.

The Company’s future minimum lease payments as of December 31, 2011 under capitalized leases and non-cancelable operating leases, with initial or remaining lease terms in excess of one year, were as follows:

 

(in thousands)    Capitalized
Leases
    Operating
Leases
 
Years ending December 31:     

2012

   $ 696      $ 2,517   

2013

     696        1,502   

2014

     695        862   

2015

     706        735   

2016

     683        626   

Later years

     11,052        488   
  

 

 

   

 

 

 

Total minimum lease payments

     14,528      $ 6,730   
    

 

 

 

Less amounts representing imputed interest

     (6,756  
  

 

 

   

Present value of minimum lease payments

     7,772     

Less current portion of capitalized lease obligations

     (163  
  

 

 

   

Capitalized lease obligations, excluding current portion

   $ 7,609     
  

 

 

   

Rock Hill Facility

The Company leases its current headquarters and research and development facility pursuant to a lease agreement with Lex Rock Hill, LP. After its initial term ending August 31, 2021, the lease provides the Company with the option to renew the lease for two additional five-year terms. The lease also grants the Company the right to cause Lex Rock Hill, subject to certain terms and conditions, to expand the leased premises during the term of the lease, in which case the term of the lease would be extended. The lease is a triple net lease and provides for

 

F-28


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

the payment of base rent of $669 in 2012 through 2015, $682 in 2016, including a rent escalation in 2016, $709 in 2017 through 2020 and $723 in 2021. Under the terms of the lease, the Company is obligated to pay all taxes, insurance, utilities and other operating costs with respect to the leased premises. The lease also grants the Company the right to purchase the leased premises and undeveloped land surrounding the leased premises on terms and conditions described more particularly in the lease. In 2011, the Company exercised its right to purchase the undeveloped land for $370. This lease is recorded as a capitalized lease obligation under ASC 840, “Leases.” The implicit interest rate at December 31, 2011 and 2010 was 6.93%.

Furniture and Fixtures Lease

The Company had a financing lease with a financial institution covering office furniture and fixtures which required the Company to make monthly payments through October 2011. In accordance with ASC 840, the Company recorded this lease as a capitalized lease. The implicit interest rate at December 31, 2010 was 8.05%.

Other Capital Lease Obligations

The Company leases other equipment with lease terms through August 2015. In accordance with ASC 840, the Company has recorded these leases as capitalized leases. The implicit interest rate at December 31, 2011 was 6.45% and at December 31, 2010 was 1.55%.

Note 13    Preferred Stock

The Company had 5,000 shares of preferred stock that were authorized but unissued at December 31, 2011 and 2010. In connection with the stockholders’ rights plan approved by the Company’s Board of Directors in December 2008, 1,000 shares of such preferred stock were authorized as Series A Preferred Stock. This Series A Preferred Stock and the stockholders’ rights plan were terminated by the Company’s Board of Directors on November 18, 2011.

Note 14    Stock-Based Compensation and Stockholders’ Rights Plan

Effective May 19, 2004, the Company adopted its 2004 Incentive Stock Plan (the “2004 Stock Plan”) and its 2004 Restricted Stock Plan for Non-Employee Directors (the “2004 Director Plan”). Effective upon the adoption of these Plans, all the Company’s previous stock option plans terminated, except with respect to options outstanding under those plans. As of December 31, 2011 and 2010, the aggregate number of shares of common stock underlying outstanding options issued under all previous stock option plans was 1,076 and 1,554, respectively, at an average exercise price per share of $3.76 and $4.34, respectively, with expiration dates through November 2013. All stock-based compensation expense for vested options was recognized prior to 2008.

In 2009, the maximum number of shares of common stock reserved for issuance under the 2004 Stock Plan was increased from 2,000 to 4,000. Total awards issued under this plan, net of repurchases, amounted to 384 shares of restricted stock in 2011, 284 shares of restricted stock in 2010, and 628 shares of restricted stock in 2009. The Company estimated the future value associated with awards granted in 2011, 2010 and 2009 as $8,007, $3,688 and $2,200, respectively, which is calculated based on the fair market value of the common stock on the date of grant less the amount paid by the recipient and is expensed over the vesting period of each award. The compensation expense recognized in 2011, 2010 and 2009 was $2,637, $1,149 and $1,044, respectively. Each of these awards was made with a vesting period of three years from the date of grant and required the recipient to pay the lesser of $1.00 for each share or an amount equal to ten percent of the fair market value of the Company’s common stock per share at the date of grant.

The purpose of this Plan is to provide an incentive that permits the persons responsible for the Company’s growth to share directly in that growth and to further the identity of their interests with the interests of the Company’s stockholders. Any person who is an employee of or consultant to the Company, or a subsidiary or an affiliate of the Company, is eligible to be considered for the grant of restricted stock awards, stock options or

 

F-29


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

performance awards pursuant to the 2004 Stock Plan. The 2004 Stock Plan is administered by the Compensation Committee of the Board of Directors, which, pursuant to the provisions of the 2004 Stock Plan, has the sole authority to determine recipients of awards under that plan, the number of shares to be covered by such awards and the terms and conditions of each award. The 2004 Stock Plan may be amended, altered or discontinued at the sole discretion of the Board of Directors at any time.

The 2004 Director Plan provides for the grant of up to 400 shares of common stock to non-employee directors (as defined in the Plan) of the Company, subject to adjustment in accordance with the terms of the Plan. The purpose of this Plan is to attract, retain and motivate non-employee directors of exceptional ability and to promote the common interests of directors and stockholders in enhancing the value of the Company’s common stock. Each non-employee director of the Company is eligible to participate in this Plan upon their election to the Board of Directors. The Plan provides for initial grants of 1 share of common stock to each newly elected non-employee director, annual grants of 3 shares of common stock as of the close of business on the date of each annual meeting of stockholders, and interim grants of 3 shares of common stock, or a pro rata portion thereof, to non-employee directors elected at meetings other than the annual meeting. Effective April 1, 2011, the Board of Directors amended this Plan to limit the value of any award of shares made to an eligible director to $50, valued on the date of the award. The issue price of common stock awarded under this Plan is equal to the par value per share of the common stock. The Company accounts for the fair value of awards of common stock made under this Plan, net of the issue price, as director compensation expense in the period in which the award is made. During the years ended December 31, 2011, 2010 and 2009, the Company recorded $300, $257 and $146, respectively, as director compensation expense in connection with awards of 16 shares in 2011, 36 shares in 2010 and 42 shares in 2009 of common stock made to the non-employee directors of the Company pursuant to this Plan.

As of December 31, 2011, 121 and 2,096 shares of common stock were available for future grants under the 2004 Director Plan and the 2004 Stock Plan, respectively. The status of the Company’s stock options is summarized below:

 

     2011      2010      2009  
(shares and options in thousands)    Options     Weighted
Average
Exercise
Price
     Options     Weighted
Average
Exercise
Price
     Options     Weighted
Average
Exercise
Price
 

Outstanding at beginning of year

     1,554      $ 4.34         1,728      $ 4.60         1,772      $ 4.56   

Exercised

     (452     5.61         (158     7.13         (30     2.82   

Lapsed or canceled

     (26     6.72         (16     5.34         (14     3.36   
  

 

 

      

 

 

      

 

 

   

Outstanding at end of year

     1,076      $ 3.76         1,554      $ 4.34         1,728      $ 4.60   
  

 

 

      

 

 

      

 

 

   

Options exercisable at end of year

     1,076           1,554           1,728     

Shares available for future option grants(1)

     2,217           2,480           2,736     

 

 

(1)

Assumes the issuance of options permitted by the 2004 Incentive Stock Plan.

 

F-30


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The following table summarizes information about stock options outstanding at December 31, 2011:

 

     Options Outstanding      Options Exercisable  

Range:

   Options
Outstanding
     Weighted
Average
Remaining
Contractual
Life (Years)
     Weighted
Average
Exercise
Price
     Options
Outstanding
     Weighted
Average
Exercise
Price
 

(options in thousands)

  

$1.00 to $4.99

     1,030         1.69       $ 3.62         1,030       $ 3.62   

$5.00 to $9.99

     46         .33         6.97         46         6.97   

$10.00 to $14.99

                                       
  

 

 

          

 

 

    
     1,076         1.63       $ 3.76         1,076       $ 3.76   
  

 

 

          

 

 

    

The intrinsic value of the Company’s 1,076 outstanding stock options amounted to $15,494 at December 31, 2011.

From December 2008 through November 2011, the Company maintained a stockholders’ rights plan (“the Rights Plan”). The Rights Plan included a right for holders of Common Stock to purchase Series A Preferred Stock, generally exercisable if a person or group commenced a tender or exchange offer for 15 percent or more of the Company’s Common Stock. The Series A Preferred Stock rights were terminated upon termination of the Rights Plan on November 15, 2011.

Note 15    Non-controlling Interest

In May 2009, the Company formed MQast, LLC (“MQast”), a joint venture with an unrelated third party. In accordance with ASC 810, “Consolidation,” the carrying value of the non-controlling interest was reported in the consolidated balance sheets as a separate component of equity, and both consolidated net income and comprehensive income were adjusted to include the net income attributable to the non-controlling interest. In March 2010, MQast became a wholly-owned subsidiary, and at December 31, 2010, there was no longer any income or equity attributable to the non-controlling interest.

Note 16    International Retirement Plan

The Company sponsors a non-contributory defined benefit pension plan for certain employees of a non-U.S. subsidiary initiated by a predecessor of the Company. The Company maintains insurance contracts that provide an annuity that is used to fund the current obligations under this plan. The net present value of that annuity was $2,536 and $2,394 as of December 31, 2011 and 2010, respectively. The net present value of that annuity is included in “Other assets, net” on the Company’s consolidated balance sheets at December 31, 2011 and 2010.

 

F-31


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The following table provides a reconciliation of the changes in the projected benefit obligation for the years ended December 31, 2011 and 2010:

 

(in thousands)    2011     2010  

Reconciliation of benefit obligations:

    

Obligations as of January 1

   $ 3,448      $ 3,293   

Service cost

     114        155   

Interest cost

     196        174   

Actuarial loss

     397        94   

Benefit payments

     (56     (54

Effect of foreign currency exchange rate changes

     (163     (214
  

 

 

   

 

 

 

Obligations as of December 31

   $ 3,936      $ 3,448   
  

 

 

   

 

 

 

Funded status as of December 31 (net of tax benefit)

   $ (3,936   $ (3,448
  

 

 

   

 

 

 

The projected benefit obligation in the table above includes $397 and $94 of unrecognized net loss for the years ended December 31, 2011 and 2010, respectively. At December 31, 2011, the Company recorded this $397 loss, net of a $122 tax benefit, as a $275 adjustment to “Accumulated other comprehensive income” in accordance with ASC 715, “Compensation — Retirement Benefits.” At December 31, 2010, the Company recorded the $94 loss, net of a $29 tax benefit, as a $65 adjustment to “Accumulated other comprehensive income.” At December 31, 2009, the Company recorded the $86 loss, net of a $29 tax benefit, as a $57 adjustment to “Accumulated other comprehensive income.”

The Company has recognized the following amounts in the consolidated balance sheets at December 31, 2011 and 2010:

 

(in thousands)    2011     2010  

Accrued liabilities

   $ 52      $ 54   

Other liabilities

     3,884        3,394   
  

 

 

   

 

 

 

Projected benefit obligation

     3,936        3,448   

Accumulated other comprehensive income

     (194     64   
  

 

 

   

 

 

 

Total

   $ 3,742      $ 3,512   
  

 

 

   

 

 

 

The following projected benefit obligation and accumulated benefit obligation were estimated as of December 31, 2011 and 2010:

 

(in thousands)    2011      2010  

Projected benefit obligation

   $ 3,936       $ 3,448   
  

 

 

    

 

 

 

Accumulated benefit obligation

   $ 3,727       $ 3,252   
  

 

 

    

 

 

 

 

F-32


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The following table shows the components of net periodic benefit costs and other amounts recognized in other comprehensive income:

 

(in thousands)    2011      2010  

Net periodic benefit cost:

     

Service cost

   $ 114       $ 155   

Interest cost

     196         174   
  

 

 

    

 

 

 

Total

   $ 310       $ 329   

Other changes in plan assets and benefit obligations recognized in other comprehensive income:

     

Net loss

     275         65   
  

 

 

    

 

 

 

Total expense recognized in net periodic benefit cost and other comprehensive income

   $ 585       $ 394   
  

 

 

    

 

 

 

The following assumptions are used to determine benefit obligations as of December 31:

 

     2011     2010  

Discount rate

     4.90     5.50

Rate of compensation

     1.50     1.50

The following benefit payments, including expected future service cost, are expected to be paid:

 

(in thousands)       

Estimated future benefit payments:

  

2012

   $ 119   

2013

     143   

2014

     146   

2015

     149   

2016

     168   

2017 - 2021

     999   

 

F-33


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Note 17    Warranty Contracts

The Company provides product warranties for up to one year as part of sales transactions for certain of its printers. Warranty revenue is recognized ratably over the term of the warranties, which is the period during which the related costs are incurred. This warranty provides the customer with maintenance on the equipment during the warranty period and provides for certain repair, labor and replacement parts that may be required. In connection with this activity, the Company recognized warranty revenue and incurred warranty costs as shown in the table below:

Warranty Revenue Recognition

 

(in thousands)

   Beginning  Balance
Deferred Warranty
Revenue
     Warranty
Revenue
Deferred
     Warranty
Revenue
Recognized
    Ending  Balance
Deferred Warranty
Revenue
 
          
Year Ended December 31,           

2011

   $ 4,433       $ 4,210       $ (5,549   $ 3,094   

2010

     2,677         5,941         (4,185     4,433   

2009

     3,075         3,417         (3,815     2,677   

Warranty Costs Incurred

 

(in thousands)

Year Ended December 31,

   Materials      Labor and
Overhead
     Total  

2011

   $ 2,020       $ 3,565       $ 5,585   

2010

     1,330         2,668         3,998   

2009

     1,288         2,476         3,764   

 

F-34


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Note 18    Computation of Net Income per Share

The Company presents basic and diluted earnings per share (“EPS”) amounts. Basic EPS is calculated by dividing net income available to common stockholders by the weighted average number of common shares outstanding during the applicable period. Diluted EPS is calculated by dividing net income available to 3D Systems’ common stockholders by the weighted average number of common and common equivalent shares outstanding during the applicable period. The following table is a reconciliation of the numerator and denominator of the basic and diluted income per share computations for the years ended December 31, 2011, 2010 and 2009:

 

(in thousands, except per share amounts)    2011      2010      2009  

Numerator:

        

Net income available to 3D Systems common stockholders: numerator for basic net income per share

   $ 35,420       $ 19,566       $ 1,066   

Add: Effect of dilutive securities

        

Stock options, other equity compensation, convertible redeemable preferred stock and debentures

                       
  

 

 

    

 

 

    

 

 

 

Net income available to 3D Systems common stockholders: numerator for dilutive net income per share

   $ 35,420       $ 19,566       $ 1,066   
  

 

 

    

 

 

    

 

 

 

Denominator:

        

Denominator for basic net income per share: weighted average shares

     49,748         46,168         45,088   

Add: Effect of dilutive securities

        

Stock options, other equity compensation, convertible redeemable preferred stock and debentures

     975         760         122   
  

 

 

    

 

 

    

 

 

 

Denominator for dilutive net income per share(1)

     50,723         46,928         45,210   
  

 

 

    

 

 

    

 

 

 

Income per share

        

Basic

   $ 0.71       $ 0.42       $ 0.02   
  

 

 

    

 

 

    

 

 

 

Diluted

   $ 0.70       $ 0. 42       $ 0.02   
  

 

 

    

 

 

    

 

 

 

 

(1) 

The average outstanding diluted shares calculation excludes options covering 708 shares in 2009 with an exercise price that exceeds the average market price of shares during the period, since the effect of their inclusion would have been anti-dilutive resulting in a reduction to the net earnings per share. The average outstanding diluted shares calculation also excludes shares that may be issued upon conversion of the outstanding senior convertible notes because their conversion price exceeded the market price of the shares at December 31, 2011.

 

F-35


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Note 19    Supplemental Cash Flow Information

 

(in thousands)    2011      2010      2009  

Interest payments

   $ 1,188       $ 589       $ 622   

Income tax (receipts) payments

     1,523         711         (541

Non-cash items:

        

Transfer of equipment from inventory to property and equipment(a)

     3,714         2,484         1,323   

Transfer of equipment to inventory from property and equipment(b)

     1,068         265         915   

Issuance of stock for acquisition of businesses

     3,042         5,895           

 

(a) 

Inventory is transferred from inventory to property and equipment at cost when the Company requires additional machines for training, demonstration, short-term rentals and use in its on-demand parts services.

 

(b) 

In general, an asset is transferred from property and equipment into inventory at its net book value when the Company has identified a potential sale for a used machine. The machine is removed from inventory upon recognition of the sale.

Note 20    Fair Value Measurements

ASC 820, “Fair Value Measurements and Disclosures,” defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. ASC 820 also establishes a fair value hierarchy which requires an entity to maximize the use of observable inputs that may be used to measure fair value:

Level 1 — Quoted prices in active markets for identical assets or liabilities;

Level 2 — Observable inputs other than Level 1 prices such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; or

Level 3 — Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

For the Company, the above standard applies to cash equivalents, convertible senior notes and foreign exchange contracts. The Company utilizes the market approach to measure fair value for its financial assets and liabilities. The market approach uses prices and other relevant information generated by market transactions involving identical or comparable assets or liabilities.

Assets and liabilities measured at fair value on a recurring basis are summarized below:

 

    Fair Value Measurements as of:  
(in thousands)   December 31, 2011     December 31, 2010  
    Level 1     Level 2     Level 3     Total     Level 1     Level 2     Level 3     Total  

Description

               

Cash equivalent(1)

  $ 143,881      $      $      $ 143,881      $ 22,045      $      $      $ 22,045   

 

(1) 

Cash equivalents include funds held in money market instruments and are reported at their current carrying value which approximates fair value due to the short-term nature of these instruments and are included in cash and cash equivalents in the consolidated balance sheet.

The Company did not have any transfers of assets and liabilities between Level 1 and Level 2 of the fair value measurement hierarchy during the quarter or year ended December 31, 2011.

 

F-36


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

In addition to the financial assets and liabilities included above, certain of our non-financial assets and liabilities are to be initially measured at fair value on a non-recurring basis. This includes items such as non-financial assets and liabilities initially measured at fair value in a business combination (but not measured at fair value in subsequent periods) and non-financial, long-lived assets measured at fair value for an impairment assessment. In general, non-financial assets and liabilities including goodwill, other intangible assets and property and equipment are measured at fair value when there is an indication of impairment and are recorded at fair value only when impairment is recognized. The Company has not recorded any impairments related to such assets and has had no other significant non-financial assets or non-financial liabilities requiring adjustments or write-downs to fair value as of December 31, 2011 and 2010.

Note 21    Income Taxes

The components of the Company’s income before income taxes are as follows:

 

(in thousands)    2011      2010      2009  

Income before income taxes:

        

Domestic

   $ 25,057       $ 15,273       $ (734

Foreign

     7,389         4,466         2,647   
  

 

 

    

 

 

    

 

 

 

Total

   $ 32,446       $ 19,739       $ 1,913   
  

 

 

    

 

 

    

 

 

 

The components of income tax provision for the years ended December 31, 2011, 2010 and 2009 are as follows:

 

(in thousands)    2011     2010     2009  

Current:

      

U.S. federal

   $      $ (81   $ (41

State

     367        123          

Foreign

     1,799        1,366        506   
  

 

 

   

 

 

   

 

 

 

Total

     2,166        1,408        465   
  

 

 

   

 

 

   

 

 

 

Deferred:

      

U.S. federal

     (4,727     (1,050       

State

     (189     (82       

Foreign

     (224     (103     309   
  

 

 

   

 

 

   

 

 

 

Total

     (5,140     (1,235     309   
  

 

 

   

 

 

   

 

 

 

Total income tax provision

   $ (2,974   $ 173      $ 774   
  

 

 

   

 

 

   

 

 

 

 

F-37


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The overall effective tax rate differs from the statutory federal tax rate for the years ended December 31, 2011, 2010 and 2009 as follows:

 

     % of Pretax Income  
     2011     2010     2009  

Tax provision based on the federal statutory rate

     35.0     35.0     35.0

Release of valuation allowances

     (19.2     (5.9       

Use of valuation allowances against U.S. taxable income

     (24.8     (33.0     (96.3

Deemed income related to foreign operations

     0.7        2.8        109.3   

Non-deductible expenses

     0.4        0.3        1.3   

Income not subject to tax

     (2.0              

State taxes, net of federal benefit, before valuation allowance

     1.3        2.8        (1.4

Impact of foreign tax settlement

                   (2.7

Return to provision adjustments, foreign current and deferred balances

     (0.7     0.4        (2.3

Foreign income tax rate differential

     (0.6     (2.3     (3.8

Other

     0.7        0.8        1.4   
  

 

 

   

 

 

   

 

 

 

Effective tax rate

     (9.2 )%      0.9     40.5
  

 

 

   

 

 

   

 

 

 

The difference between the Company’s effective tax rate for 2011 and the federal statutory rate resulted primarily from changes in valuation allowances. These comprised:

 

   

The release of valuation allowances against certain U.S. deferred tax assets. This release was based upon the Company’s recent results of operations and its expected profitability in future years. The Company concluded, during the second quarter of 2011, that it is more likely than not that a portion of its net U.S. deferred tax assets will be realized. As a result, in accordance with ASC 740, $17,000 of the valuation allowance applied to such net deferred tax assets was reversed. This reversal resulted in a non-cash income tax benefit of $6,221.

 

   

Other changes in valuation allowances are a result of utilizing U.S. loss carryforwards, which had had a full valuation allowance against them, to eliminate all federal and most state income tax expense otherwise arising.

The difference between the Company’s effective tax rate for 2010 and the federal statutory rate resulted primarily from changes in valuation allowances. These comprised:

 

   

The release of valuation allowances against certain U.S. deferred tax assets. This release was based upon the Company’s recent results of operations and its expected profitability in future years. The Company concluded, during the fourth quarter of 2010, that it is more likely than not that a portion of its net U.S. deferred tax assets will be realized. As a result, in accordance with ASC 740, $3,000 of the valuation allowance applied to such net deferred tax assets was reversed. This reversal resulted in a non-cash income tax benefit of $1,162.

 

   

Other changes in valuation allowances as a result of utilizing U.S. loss carryforwards, which had had a full valuation allowance against them, to eliminate all federal and most state income tax expense otherwise arising.

The difference between the Company’s effective tax rate for 2009 and the federal statutory rate resulted primarily from changes in valuation allowances and from the impact of deemed income related to foreign operations.

 

F-38


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

In 2011, the Company’s valuation allowance against net deferred income tax assets decreased by $25,892. This decrease consisted of a $25,892 decrease against the U.S. deferred income tax assets. The decrease in the valuation allowance against the net U.S. deferred income tax assets resulted primarily from the increase in the Company’s domestic net operating income, an increase in the amount of deferred income tax liabilities and from the release of a portion of the valuation allowances against U.S. net deferred tax assets.

In 2010, the Company’s valuation allowance against net deferred income tax assets decreased by $4,054. This decrease consisted of a $4,059 decrease against the U.S. deferred income tax assets and a $5 increase against foreign deferred income tax assets. The decrease in the valuation allowance against the net U.S. deferred income tax assets resulted primarily from the increase in the Company’s domestic net operating income and from the release of a portion of the valuation allowances against U.S. net deferred tax assets.

In conjunction with the Company’s ongoing review of its actual results and anticipated future earnings, the Company reassesses the possibility of releasing the valuation allowance remaining, after the release discussed above, on its U.S. net deferred tax assets. Based upon this assessment, a further release of the valuation allowance may occur during 2012 or subsequent years. The required accounting for the release could involve significant tax amounts and it could impact earnings in the quarter in which it was deemed appropriate to release the reserve. At December 31, 2011, the U.S. valuation allowance was approximately $8,690.

The components of the Company’s net deferred income tax assets and net deferred income tax liabilities at December 31, 2011 and 2010 are as follows:

 

(in thousands)    2011     2010  

Deferred income tax assets:

    

Tax credit carryforwards

   $ 6,436      $ 6,177   

Net operating loss carryforwards

     17,829        24,761   

Reserves and allowances

     3,501        2,584   

Accrued liabilities

            1,636   

Stock options and awards

     2,701        2,003   

Deferred lease revenue

     79        3   

Property, plant and equipment

            359   
  

 

 

   

 

 

 

Gross deferred income tax assets

     30,546        37,523   

Valuation allowance

     (8,781     (34,673
  

 

 

   

 

 

 

Total deferred income tax assets

     21,765        2,850   

Deferred income tax liabilities:

    

Senior convertible notes

     7,200          

Intangibles

     10,519        4,110   

Property, plant and equipment

     531          

Accrued liabilities

     448          
  

 

 

   

 

 

 

Total deferred income tax liabilities

     18,698        4,110   
  

 

 

   

 

 

 

Net deferred income tax assets (liabilities)

   $ 3,067      $ (1,260
  

 

 

   

 

 

 

The Company’s net deferred income tax assets (liabilities) include both current and noncurrent amounts. Accrued liabilities and deferred lease revenue are classified as current. Portions of reserves and allowances, tax credit carryforwards, net operating loss carryforwards and valuation allowances that would be available within the next year are classified as current, with the remainder of the balance classified as noncurrent. Stock option awards, property, plant and equipment, the senior convertible notes and intangibles are also classified as noncurrent.

 

F-39


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The Company accounts for income taxes in accordance with ASC 740. Under ASC 740, deferred income tax assets and liabilities are determined based on the differences between financial statement and tax bases of assets and liabilities, using enacted rates in effect for the year in which the differences are expected to reverse. The provision for income taxes is based on domestic and international statutory income tax rates in the jurisdictions in which the Company operates.

At December 31, 2011, $17,829 of the Company’s deferred income tax assets was attributable to $88,884 of net operating loss carryforwards, which consisted of $44,255 of loss carryforwards for U.S. federal income tax purposes, $44,196 of loss carryforwards for U.S. state income tax purposes and $433 of loss carryforwards for foreign income tax purposes.

At December 31, 2010, $24,761 of the Company’s deferred income tax assets was attributable to $110,503 of net operating loss carryforwards, which consisted of $65,121 of loss carryforwards for U.S. federal income tax purposes, $45,090 of loss carryforwards for U.S. state income tax purposes and $292 of loss carryforwards for foreign income tax purposes.

The federal net operating loss carryforwards set forth above exclude deductions for the exercise of stock options. The net operating loss attributable to the excess of the tax deduction for the exercise of the stock options over the cumulative expense that would be recorded under ASC 718 in the financial statements is not recorded as a deferred income tax asset. The benefit of the excess deduction of $12,339 will be recorded to additional paid-in capital when the Company realizes a reduction in its current taxes payable.

The net operating loss carryforwards for U.S. federal income tax purposes begin to expire in 2024, and certain loss carryforwards for U.S. state income tax purposes begin to expire in 2012. In addition, certain loss carryforwards for foreign income tax purposes begin to expire in 2018 and certain other loss carryforwards for foreign purposes do not expire. Ultimate utilization of these loss carryforwards depends on future taxable earnings of the Company and its subsidiaries.

At December 31, 2011, tax credit carryforwards included in the Company’s deferred income tax assets consisted of $3,307 of research and experimentation tax credit carryforwards for U.S. federal income tax purposes, $2,040 of such tax credit carryforwards for U.S. state income tax purposes, $474 of alternative minimum tax credit carryforwards for U.S. federal income tax purposes and $615 of other state tax credits. The alternative minimum tax credits and the state research and experimentation credits do not expire; the other federal and state credits begin to expire in 2012.

At December 31, 2010, tax credit carryforwards included in the Company’s deferred income tax assets consisted of $3,050 of research and experimentation tax credit carryforwards for U.S. federal income tax purposes, $2,135 of such tax credit carryforwards for U.S. state income tax purposes, $474 of alternative minimum tax credit carryforwards for U.S. federal income tax purposes and $518 of other state tax credits. The alternative minimum tax credits and the state research and experimentation credits do not expire; the other federal and state credits begin to expire in 2012.

The Company has not provided for any taxes on approximately $7,128 of unremitted earnings of its foreign subsidiaries, as the Company intends to permanently reinvest all such earnings outside of the U.S.

The Company decreased its ASC 740 (formerly FIN 48) reserve by $12 for the year ended December 31, 2011 and increased this reserve by $110 for the year ended December 31, 2010. The Company increased its unrecognized benefits by $36 for the year ended December 31, 2011 and decreased these benefits by $77 for the year ended December 31, 2010. The Company does not anticipate any additional unrecognized tax benefits during the next twelve months that would result in a material change to its consolidated financial position.

 

F-40


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

 

     Unrecognized Tax Benefits  
(in thousands)    2011     2010     2009  

Balance at January 1

   $ (429   $ (352   $ 3,079   

Increases related to prior year tax positions

     28        19          

Decreases related to prior year tax positions

     (2     (149     (3,281

Increases related to current year tax positions

            72          

Decreases related to current year tax positions

            (3     (150

Decreases in unrecognized liability due to settlements with foreign tax authorities

     10        (16       
  

 

 

   

 

 

   

 

 

 

Balance at December 31

   $ (393   $ (429   $ (352
  

 

 

   

 

 

   

 

 

 

The Company includes interest and penalties accrued in the consolidated financial statements as a component of income tax expense.

The principal tax jurisdictions in which the Company files income tax returns are the United States, France, Germany, Japan, India, Italy, Switzerland, Australia, the Netherlands and the United Kingdom. Tax years 2008 through 2011 remain subject to examination by the U.S. Internal Revenue Service. The Company has utilized a portion of its U.S. loss carryforwards causing the years from 1997 through 2003 to be subject to examination. Should the Company utilize any of its remaining U.S. loss carryforwards, its remaining losses, which date back to 2003, would be subject to examination. The Company’s non-U.S. subsidiaries’ tax returns are open to possible examination beginning in the year shown in parentheses in the following countries: France (2004), Germany (2006), Japan (2005), Italy (2006), Switzerland (2005), the United Kingdom (2007), the Netherlands (2006) and Australia (2007).

Note 22    Segment Information

The Company operates in one reportable business segment in which it develops, manufactures and markets worldwide 3D printing, rapid prototyping and manufacturing printers and parts solutions, which produce three-dimensional objects more quickly than traditional manufacturing. The Company conducts its business through subsidiaries in the U.S., a subsidiary in Switzerland that operates a research and production facility and sales and service offices operated by subsidiaries in Europe (France, Germany, Italy, the Netherlands, Switzerland and the United Kingdom) and in Asia Pacific (Australia, China and Japan). The Company has historically disclosed summarized financial information for the geographic areas of operations as if they were segments in accordance with ASC 280, “Segment Reporting.”

Such summarized financial information concerning the Company’s geographical operations is shown in the following tables:

 

(in thousands)    2011      2010      2009  

Revenue from unaffiliated customers:

        

United States

   $ 117,739       $ 72,452       $ 48,917   

Germany

     34,978         27,097         24,128   

Other Europe

     48,346         38,442         24,612   

Asia Pacific

     29,360         21,877         15,178   
  

 

 

    

 

 

    

 

 

 

Total

   $ 230,423       $ 159,868       $ 112,835   
  

 

 

    

 

 

    

 

 

 

 

F-41


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

The Company’s revenue from unaffiliated customers by type is as follows:

 

(in thousands)    2011      2010      2009  

Printers and other products

   $ 66,665       $ 54,686       $ 30,501   

Materials

     70,641         58,431         50,297   

Services

     93,117         46,751         32,037   
  

 

 

    

 

 

    

 

 

 

Total revenue

   $ 230,423       $ 159,868       $ 112,835   
  

 

 

    

 

 

    

 

 

 

Intercompany sales were as follows:

 

     Year ended December 31, 2011  
     Intercompany sales to  
(in thousands)    United
States
     Germany      Other
Europe
     Asia
Pacific
     Total  

United States

   $       $ 17,634       $ 10,213       $ 3,984       $ 31,831   

Germany

     372                 3,523                 3,895   

Other Europe

     13,388         9         118         0         13,515   

Asia-Pacific

     18         4                         22   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 13,778       $ 17,647       $ 13,854       $ 3,984       $ 49,263   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

     Year ended December 31, 2010  
     Intercompany sales to  
(in thousands)    United
States
     Germany      Other
Europe
     Asia
Pacific
     Total  

United States

   $       $ 14,862       $ 11,266       $ 2,499       $ 28,627   

Germany

     266                 4,094                 4,360   

Other Europe

     9,240         75         208                 9,523   

Asia-Pacific

     34                                 34   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 9,540       $ 14,937       $ 15,568       $ 2,499       $ 42,544   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

     Year ended December 31, 2009  
     Intercompany sales to  
(in thousands)    United
States
     Germany      Other
Europe
     Asia
Pacific
     Total  

United States

   $       $ 12,377       $ 7,415       $ 3,005       $ 22,797   

Germany

     477                 3,851                 4,328   

Other Europe

     7,421         559                         7,980   

Asia-Pacific

                                       
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 7,898       $ 12,936       $ 11,266       $ 3,005       $ 35,105   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

F-42


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

 

(in thousands)    2011      2010      2009  

Income (loss) from operations:

        

United States

   $ 19,045       $ 10,946       $ (2,635

Germany

     1,509         935         278   

Other Europe

     6,645         1,935         1,279   

Asia Pacific

     7,152         6,356         3,636   
  

 

 

    

 

 

    

 

 

 

Subtotal

     34,351         20,172         2,558   

Inter-segment elimination

     551         748         515   
  

 

 

    

 

 

    

 

 

 

Total

   $ 34,902       $ 20,920       $ 3,073   
  

 

 

    

 

 

    

 

 

 

 

(in thousands)    2011      2010  

Assets:

     

United States

   $ 346,350       $ 113,249   

Germany

     20,285         17,231   

Other Europe

     71,202         67,790   

Asia Pacific

     25,137         10,530   
  

 

 

    

 

 

 

Total

   $ 462,974       $ 208,800   
  

 

 

    

 

 

 

 

(in thousands)    2011      2010      2009  

Depreciation and amortization:

        

United States

   $ 8,075       $ 6,031       $ 4,943   

Germany

     234         327         359   

Other Europe

     2,475         1,004         403   

Asia Pacific

     718         158         181   
  

 

 

    

 

 

    

 

 

 

Total

   $ 11,502       $ 7,520       $ 5,886   
  

 

 

    

 

 

    

 

 

 

 

(in thousands)    2011      2010  

Long-lived assets:

     

United States

   $ 128,646       $ 49,863   

Germany

     9,279         8,436   

Other Europe

     47,495         43,194   

Asia Pacific

     16,174         7,167   
  

 

 

    

 

 

 

Total

   $ 201,594       $ 108,660   
  

 

 

    

 

 

 

 

(in thousands)    2011      2010      2009  

Capital expenditures:

        

United States

   $ 1,964       $ 671       $ 798   

Germany

     6         8         125   

Other Europe

     896         586         36   

Asia Pacific

     4         18         15   
  

 

 

    

 

 

    

 

 

 

Total

   $ 2,870       $ 1,283       $ 974   
  

 

 

    

 

 

    

 

 

 

 

F-43


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Note 23    Commitments and Contingencies

On November 21, 2011, the Company entered into a stock purchase agreement to purchase all the outstanding capital stock of Z Corporation, a Massachusetts corporation (“Z Corp”), and Vidar Systems Corporation, a Virginia corporation (“Vidar”), from Contex Group A.S. for up to $137,000 in cash. This purchase price was subject to certain adjustments provided for in the stock purchase agreement, which included a provision that the seller would be entitled to retain any cash held by Z Corp and Vidar at the time of the closing except for an agreed upon amount to be included in no less than $6,600 of working capital of Z Corp and Vidar to be delivered to the Company at the closing of the acquisition. Completion of this transaction was subject to certain conditions set forth in the stock purchase agreement, and that agreement contained certain covenants, representations and warranties among the parties. The Company completed the closing under the stock purchase agreement on January 3, 2012 and paid the $135,488 purchase price in cash at that time, net of cash received and subject to final closing adjustments. At the date of this Form 10-K, those final closing adjustments have not yet been completed.

The Company leases office space and certain furniture and fixtures under various non-cancelable operating leases. Rent expense under operating leases was $2,738, $1,977 and $1,707 for 2011, 2010 and 2009, respectively.

As of December 31, 2011, the Company has supply commitments with third party assemblers for printer assembly for the first quarter of 2012 that total $10,940 compared to $9,317 at December 31, 2010.

For certain of the recent acquisitions, we are obligated to pay deferred purchase price totaling $1,420, due in 2012 and 2013, based upon the exchange rate at the date of acquisition. In addition, certain of the agreements contain earnout provisions under which the sellers of the acquired businesses can earn additional amounts. The total liabilities recorded for these earnouts as of December 31, 2011 was $1,862 compared to $3,297 at December 31, 2010. See Note 3 for details of acquisitions and related commitments.

Indemnification

In the normal course of business the Company periodically enters into agreements to indemnify customers or suppliers against claims of intellectual property infringement made by third parties arising from the use of the Company’s products. Historically, costs related to these indemnification provisions have not been significant and we are unable to estimate the maximum potential impact of these indemnification provisions on our future results of operations.

To the extent permitted under Delaware law, the Company indemnifies directors and officers for certain events or occurrences while the director or officer is, or was serving, at the Company’s request in such capacity, subject to limited exceptions. The maximum potential amount of future payments we could be required to make under these indemnification obligations is unlimited; however, the Company has directors and officers insurance coverage that may enable the Company to recover future amounts paid, subject to a deductible and the policy limits. There is no assurance that the policy limits will be sufficient to cover all damages, if any.

Litigation

In 2008, DSM Desotech Inc. filed a complaint, which it has subsequently amended, in an action titled DSM Desotech Inc. v. 3D Systems Corporation and 3D Systems, Inc. in the United States District Court for the Northern District of Illinois (Eastern Division) asserting that the Company engaged in anticompetitive behavior with respect to resins used in certain of its stereolithography machines. The complaint further asserted that the Company is infringing upon two of DSM Desotech’s patents relating to stereolithography machines.

The Company filed answers to DSM Desotech’s complaint in which, among other things, the Company denied the material allegations of DSM Desotech’s complaint. In 2010, the Court issued a decision relating to the construction of the claims of the patents-in-suit following a Markman hearing held in 2009. In that decision, the Court generally adopted the claim constructions that the Company proposed.

 

F-44


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Fact discovery, including expert discovery, regarding the claims pending in this case concluded in 2011. The Company filed motions for summary judgment in December 2011 that seek rulings in its favor on all of DSM Desotech’s claims in the litigation. As of the date of this Form 10-K, the Court has not yet ruled on those motions.

The Company understands that DSM Desotech estimates the damages associated with its claims to be in excess of $40,000. The Company intends to continue to vigorously contest all the claims asserted by DSM Desotech.

The Company has been pursuing patent infringement litigation against EnvisionTEC, Inc. and certain of its related companies since 2005. In this litigation, the Company asserted that EnvisionTEC infringed the Company’s patents covering various three-dimensional solid imaging products and methods for creating physical three-dimensional models of an object and has sought injunctive relief and damages. EnvisionTEC’s Perfactory machine and Vanquish machine (the Vanquish is now marketed as the PerfactoryXede and PerfactoryXtreme) are the two products accused of patent infringement.

In 2008 the Court issued Markman claim constructions that generally adopted the claim constructions the Company proposed. Following a subsequent jury trial and certain other proceedings, the Court issued a judgment, as amended through 2011, to the effect that EnvisionTEC’s Perfactory and Vanquish machines infringe certain claims of one of our patents and its Vanquish machines infringe certain claims of another of our patents.

On October 13, 2011, EnvisionTEC’s motion to stay damages discovery was denied by the Court, and damages discovery is underway. The Company intends to pursue its claims for damages against EnvisionTEC.

On October 17, 2011, EnvisionTEC filed a Notice of Appeal with the United States Court of Appeals for the Federal Circuit seeking judicial review of the Court’s judgment, and the Company filed a motion to dismiss that appeal on December 12, 2011. As of the date of this Form 10-K, the Court of Appeals has not yet ruled.

In 2010, MSK K.K., a Japanese company, filed a complaint against the Company’s Japanese subsidiary in the Tokyo District Court asserting, among other things, various contract claims associated with two laser sintering machines purchased from the Company’s Japanese subsidiary in 2007.

The plaintiff is seeking damages in excess of the Japanese Yen equivalent of $2,101. Several hearings have been held in the Tokyo District Court with respect to these claims. The Company’s Japanese subsidiary is vigorously contesting all of the claims asserted by the plaintiff.

The Company is also involved in various other legal matters incidental to its business. The Company believes, after consulting with counsel, that the disposition of these other legal matters will not have a material effect on our consolidated results of operations or consolidated financial position.

 

F-45


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Note 24    Selected Quarterly Financial Data (unaudited)

The following tables set forth unaudited selected quarterly financial data:

 

     Quarter ended  
(in thousands)    December 31,
2011
     September 30,
2011
     June 30,
2011
    March 31,
2011
 

Consolidated revenue

   $ 69,861       $ 57,538       $ 55,128      $ 47,896   

Gross profit

     32,865         27,763         25,203        23,197   

Total operating expenses

     22,166         18,972         17,202        15,786   

Income from operations

     10,699         8,791         8,001        7,411   

Income tax (benefit) expense

     703         917         (5,479     885   

Net income

     8,005         7,220         13,373        6,822   

Basic net income per share

   $ 0.16       $ 0.14       $ 0.27      $ 0.14   

Diluted net income per share

   $ 0.16       $ 0.14       $ 0.26      $ 0.14   

 

     Quarter ended  
(in thousands)    December 31,
2010
    September 30,
2010
     June 30,
2010
     March 31,
2010
 

Consolidated revenue

   $ 51,595      $ 41,503       $ 35,144       $ 31,627   

Gross profit

     24,871        18,828         15,956         14,321   

Total operating expenses

     15,182        13,668         12,542         11,663   

Income from operations

     9,689        5,160         3,414         2,658   

Income tax (benefit) expense

     (594     284         247         236   

Net income

     9,443        5,368         2,737         2,018   

Basic net income per share

   $ 0.20      $ 0.12       $ 0.06       $ 0.04   

Diluted net income per share

   $ 0.20      $ 0.11       $ 0.06       $ 0.04   

The sum of per share amounts for each of the quarterly periods presented does not necessarily equal the total presented for the year because each quarterly amount is independently calculated at the end of each period based on the net income available to common stockholders for such period and the weighted average shares of outstanding common stock for such period.

Note 25    Subsequent Events

On November 21, 2011, the Company entered into a stock purchase agreement to purchase all of the outstanding capital stock of Z Corporation (“Z Corp”), a Massachusetts corporation, and Vidar Systems Corporation, a Virginia corporation (“Vidar”), from Contex Group A.S. for up to $137,000 in cash. This purchase price was subject to certain adjustments provided for in the stock purchase agreement, which included a provision that the seller would be entitled to retain any cash held by Z Corp and Vidar at the time of the closing except for an agreed upon amount to be included in no less than $6,600 of working capital of Z Corp and Vidar to be delivered to the Company at the closing of the acquisition. Completion of this transaction was subject to certain conditions set forth in the stock purchase agreement, and that agreement contained certain covenants, representations and warranties among the parties.

On January 3, 2012, the Company completed the acquisition under the stock purchase agreement and paid the $135,488 purchase price in cash at that time, net of cash received, on a debt-free basis, and subject to final closing adjustments.

 

F-46


Table of Contents

3D Systems Corporation

Notes To Consolidated Financial Statements — (Continued)

 

Z Corp is a provider of personal and professional 3D printers, 3D scanners, proprietary print materials and services. Z Corp provides the Company with an additional print engine, capable of printing in full color, fills in its 3D printer price points and doubles it’s reseller channel for personal and professional printers. Vidar is a provider of medical film scanners that digitize film for radiology, oncology, mammography and dental applications. Vidar provides the Company with a distribution channel of resellers that are specifically focused on healthcare, expanding its healthcare solutions portfolio and reach. Future revenue from these acquisitions will be reported within the printers and other products revenue line. At the date of this Form 10-K, those final closing adjustments have not yet been completed. See Note 3.

 

F-47


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and Board of Directors of

3D Systems Corporation

Rock Hill, South Carolina

The audits referred to in our report dated February 23, 2012, relating to the consolidated financial statements of 3D Systems Corporation for the years ended December 31, 2011, 2010 and 2009, which is contained in Item 8 of the Form 10-K, included the audit of the financial statement schedule listed in the accompanying index. This financial statement schedule is the responsibility of the Company’s management. Our responsibility is to express an opinion on the financial statement schedule based upon our audits.

In our opinion, the financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

/s/    BDO USA, LLP

BDO USA, LLP

Charlotte, North Carolina

February 23, 2012

 

F-48


Table of Contents

SCHEDULE II

3D Systems Corporation

Valuation and Qualifying Accounts

Years ended December 31, 2011, 2010 and 2009

 

Year

Ended

  

Item

  Balance at
beginning
of year
    Additions
charged/
(credited)

to expense
    Charged to
other
accounts
    Deductions     Balance
at end of
year
 

2011

   Allowance for doubtful accounts   $ 2,017      $ 1,731      $ 83      $ (812   $ 3,019   

2010

   Allowance for doubtful accounts     1,790        328               (101     2,017   

2009

   Allowance for doubtful accounts     2,015        909               (1,134     1,790   

2011

   Reserve for excess and obsolete inventory   $ 2,205      $ 431      $      $ (94   $ 2,542   

2010

   Reserve for excess and obsolete inventory     2,693        (364            (124     2,205   

2009

   Reserve for excess and obsolete inventory     3,156        (15            (448     2,693   

2011

   Deferred income tax asset allowance accounts(1)   $ 34,673      $ 2,318      $ 0      $ (28,210   $ 8,781   

2010

   Deferred income tax asset allowance
accounts
(1)
    38,727        6,266               (10,320     34,673   

2009

   Deferred income tax asset allowance
accounts
(1)
    38,326        6,272               (5,871     38,727   

 

(1) 

Additions represent increases in valuation allowances against deferred tax assets; deductions represent decreases in valuation allowances against deferred tax assets.

 

F-49